Get a FREE wood blade with the mitre saw I'm using throughout this video using my exclusive link! tinyurl.com/yc3zmvvf Also get 10% off many Evolution products by using discount code SUMERAY at checkout!💰🪚
The way your stop block is set up kick back and or a piece of wood flying up is inevitable eventually, you'll definitely want to stop the blade at the bottom if set up like this. The stop block should be on the left where you are holding the workpiece down leaving the offcut on the right of the blade to fall away naturally.
In the case of using a stop block the size of the block is a sure way to get kick back. Where when the blade is retracting the saw teeth will grab the work piece and draw it towards the fence. It can cause the blade to stall or even throw it towards you causing potential injury. I use a fairly thin strip for the stop block. Be sure to leave a bit space at the bottom against the table to prevent sawdust from collecting thus ruining the exact measurement.
Get a FREE wood blade with the mitre saw I'm using throughout this video using my exclusive link! tinyurl.com/yc3zmvvf
Also get 10% off many Evolution products by using discount code SUMERAY at checkout!💰🪚
The way your stop block is set up kick back and or a piece of wood flying up is inevitable eventually, you'll definitely want to stop the blade at the bottom if set up like this. The stop block should be on the left where you are holding the workpiece down leaving the offcut on the right of the blade to fall away naturally.
Thanks for the tip!
In the case of using a stop block the size of the block is a sure way to get kick back. Where when the blade is retracting the saw teeth will grab the work piece and draw it towards the fence. It can cause the blade to stall or even throw it towards you causing potential injury. I use a fairly thin strip for the stop block. Be sure to leave a bit space at the bottom against the table to prevent sawdust from collecting thus ruining the exact measurement.
The sacrificial fence was mindblowing. Carpenters are madlads. Cheers!
Great advice and refresher.
Glad it was helpful!
Thanks for the tips. Take care & stay safe.
Thanks, you too!
wonderful........Brilliant Advice......cheers from the US, Paul
Thanks Paul 🙏
Good video Mate, I enjoyed it!
Glad to hear it! 🙏
the thickness of the cutting edge is called the kurf of the saw blade
Thanks 👍
Nice video m8 think weve all been there done some of them. 👍🏴
Thanks 👍
Love the way you pronounce Milwaaakee! I always pronounce it Milwarkee
Haha 😝