Huge thanks to Modern Airflow Dynamics for building us this INSANE engine read to spray the house down 👀👀👀 Don't forget for EVERY DOLLAR you spend on www.dls.store gets you one automatic entry to win the YETI or the CREATURE! Also we have an official itsjusta6 discord now! Go check it out: www.discord.gg/itsjusta6
the tire changer is giving me ptsd from working at discount tire😂 some tips for the tire changer and balancer 1. when breaking the front bead (wheel face side) for the tire you only need to do it once, make sure you dont break the bead on the valve stem if you have tpms sensors, for the back you will need to break it all the way around the wheel. 2. if it gets cold in the shop and the wheel weights wont stick to the wheel, make sure the wheel surface is prepped with either window cleaner or apc, if it still wont stick when cold use a heat gun to warm up the wheel and the tape on the weights. 3. make sure to replace the valve stem every time you change out a tire, its very common for leaks to come through old valve stem’s because of rotten rubber. 4. i would invest in a cordless drill (or have SK send you one) with a wire brush attachment, it will take off all the corrosion on the barrel of the wheel’s. 5. lube is your friend lol, either use soapy water or buy tire lube, some tires have stiff sidewalls and stiff beads and without lube you have a chance of tearing the bead and ruining your tire. be generous when applying lube too, you can always wipe it off.. im sure you knew at least some of these things but im just letting you and the comment section in on some tips. keep up the good work bro. #6nation
Yup same discount tire ptsd. Also when it tells you to add more weight in a different location you are just counter balancing the original weights you put on. So just slightly adjust the original weights.
Lmaoooo same dude😂 3 years of hell but sometimes i miss it🥴 I’d also add, when balancing you don’t want to counterweight the wheel, “it’s only .25” but at that point why even add it??
Bro I've been at Tire Discounters & now S&S tire. You said everything I was thinking while watching. & the other guy talking bout counter balancing is right too. Subtract from original weights if its telling you to put it on the opposite side of where the original weights are.
For the balancer, when you arent putting tack on weights on the outside of the wheel you use the inside measuring arm twice. Once where you normally would and once as deep in the inside of the wheel as you can where you will be putting the second set of stick weights
future reference 6:38 careful with wheels that have tmps, in that position you may break the sensor from the stem, makes good practice to do it even when the wheels don't have tpms to put the stem vertically! awesome vid as always
You guys should totally go through different TH-camr shops and garages and show it off cause when you guys said that I was intrigued. Would be cool to have one channel with a collection of videos what having a passion and building following on social media can accomplish in this day and age.
Buy some angle die grinders with buffer pads for the corrosion on the beads of the rims, use soap for lube on the tires if they are tight, look for some rubber covers for the ends your tire tool so it will never scratch a rim when it makes contact or when pulling the tool out you never have to worry I’ve worked tires buddy and knowing how to do it and doing it yourself whenever is gonna be so nice great job!
I hope that all who comes across this message get rich and achieve their highest dreams, my dream is to be successful with my videos, bless up and have a great day
Gavin justa heads up, when firstly de-Beading any tire, make sure you don't do it anywhere near the valve stem. If you de-bead near it, there is a possibility of hitting the tpms sensor and breaking it and they aren't cheap lol. Love the videos!
Gavin I BEG for you to read this. look bro, I have been watching you since 26k and seeing you improve after months of not watching you, I realized damn.. this is the guy that inspired me to get into cars. When i seen you got your McLaren I cried. When you sold your Camaro, I cried. When you got it back I cried. When you got your mustang, I cried. Look bro, Moral of the story is, THANK YOU. And congrats for almost hitting a million. I remember when you hit 100k. Man that felt unreal. Ik its a bit wierd but, you have seriously inspired me to get into cars, and i now have dreams of opening a shop where i do Welding and well, for mechanical purposes in general. God Bless you Gavin. And again, thank you
My dad owns a mechanic shop and I worked there for 2 or 3 month and it’s fun cause I’ve always wanted to learn how to work on cars but that’s also why I watch your channel to learn more
Gavin I suggest getting a grinder with a wire brush attachment for wheels.. hit the pedal and let it eat while you hold it on there. I do it every day and I couldn't imagine a wire brush lol
Hell yeh finally race truck time and hopefully drag stang soon nice work gavin and the 6 media crew you guys have done well and keep up the amazing work guys. #respectful crew #friendship
Nicest tire machine I’ve ever seen and I’ve seen at least 3! Man your shop is pretty impressive, I called about one close to me that’s vacant (just to see what they go for) in hopes that someday I’ll be able to do something similar and dang... $4,800/month for 12 months and would have to be built out. My TH-cam presence would have to change A LOT for that to make sense. We can all dream though can’t we?!
Yes. RACE TRUCK CONTENT. this is my favorite content because I drive a truck. Nice car machines btw. That wheel balancing machine with the laser. Sweet
Pro tip, when breaking the bead on cars with tpms, keep the valve 90deg from the shovel/ blade/ bead separator at all times to keep from breaking the sensors
We have an fully automatic tyre-machine at work, its all fun and games until it does what it wants. Its the best machine ive worked with so far, unless it stops working like its supposed to do, i think the machine is called like ,,Monty Quadriga 3000" or something
Hey gavin probably wont see this but a little tip for the future if you have corrosion in the bead take tire off mount wheel on balancer do a free spin and just hold the wire brush on the bead and continue until all corrosion is gone alot faster
That's one of them fancy limited hands on type of mounting machines, I used a Corgi brand one very similar to it, damn machine it's self cost 35k Tip Gavin, I always break the beads at 12 o clock and 6 o clock because TPMS sensors, it's a good habit to get into Been doin auto stuff including tires for about 6.5 years, it's a passion of mine
Her Gavin, a little advice, when you break the tire off the bead make sure you have the valve stem at the top or the bottom so you don’t break any tpm sensors. Just looking out bro
I seen they finally got the Hellephant engines in, at some shops! I would love to see you do a build giveaway with one of them, or just build a badass track car with it! Maybe buy a vehicle that needs an engine from www.autotempest.com, for the build! Would make some awesome vlogs!
I want to get myself a Mini, now I see 2 in first 2 minutes in video of my favorite YT channel. I still don't know if it's reliable enough and right car for me.
I would have had to walk away on the viper situation too man. You just don't do that to somebodys car especially one worth more than their life savings lol
Learned being a tech at firestone. When you have inner and out weights being called that close, spin your tire 180 degrees and rebalance it. Your goal is the least amount of weights possible.
Hey y’all so sorry it’s been a long time since I watch y’all video. I’m still a big fan and kind of bummer I’m back home lol so back to reality 🤣🤣🤣🤣 but I love the vids and y’all are an inspiration to me. I have an idea to build my big shop hopefully soon. Great job all of you. How big of tires and rim can that machine do up too?
Hey man just wanted to say I really really enjoy your videos, I have been a subscriber for a while, and you help motivate me so much to get out there and learn more about cars and work hard to get one some day. It is my dream to have a nice car that runs and will take me places. I really hop that you can see this message Bc you deserve a lot of congrats on your new car and all the hard work that not only you do, but how hard your team works. My dream car is a mustang gt, and thanks to you I have fallen in love with that car too. Hopefully you could find a knew home for your mustang, I also love the intros keep up the work and thank you again for helping people out and always spreading kindness and your big smile I love it bro.😁😁😁
Gavin If you read this can you give us an update on drag strip content? It’s been something I’ve looked forward to see you doing since you took the gt350 to the strip and it would be really cool to see the black car on one again
Hey I'm gonna have to say that slime shit does work when in a pinch. My gf had a tire go flat we didnt have money for a new tires so I inflated it with slime and a year later that tire is still holding up.
Huge thanks to Modern Airflow Dynamics for building us this INSANE engine read to spray the house down 👀👀👀 Don't forget for EVERY DOLLAR you spend on www.dls.store gets you one automatic entry to win the YETI or the CREATURE!
Also we have an official itsjusta6 discord now! Go check it out: www.discord.gg/itsjusta6
Have y’all ever thought about building a diesel truck?
join the discord, its fun
who joined the discord gaming vc that day?
Where is doug
There a guy in Texas presicoin transmission he can get u right!!
Finally we see Doug after everyone was crying over him worried he quit
For the last couple videos everyone was saying he might of quit because he hasn't been seen in the videos
Im still crying from harry being gone
Luis Montes well they are like nearly a month behind so not much they can do
@@word9904 ya I know but we know Dame stright doug ain't going no where
Doug cant quit he was too much job security
the tire changer is giving me ptsd from working at discount tire😂 some tips for the tire changer and balancer
1. when breaking the front bead (wheel face side) for the tire you only need to do it once, make sure you dont break the bead on the valve stem if you have tpms sensors, for the back you will need to break it all the way around the wheel.
2. if it gets cold in the shop and the wheel weights wont stick to the wheel, make sure the wheel surface is prepped with either window cleaner or apc, if it still wont stick when cold use a heat gun to warm up the wheel and the tape on the weights.
3. make sure to replace the valve stem every time you change out a tire, its very common for leaks to come through old valve stem’s because of rotten rubber.
4. i would invest in a cordless drill (or have SK send you one) with a wire brush attachment, it will take off all the corrosion on the barrel of the wheel’s.
5. lube is your friend lol, either use soapy water or buy tire lube, some tires have stiff sidewalls and stiff beads and without lube you have a chance of tearing the bead and ruining your tire. be generous when applying lube too, you can always wipe it off..
im sure you knew at least some of these things but im just letting you and the comment section in on some tips. keep up the good work bro. #6nation
Yup same discount tire ptsd. Also when it tells you to add more weight in a different location you are just counter balancing the original weights you put on. So just slightly adjust the original weights.
Lmaoooo same dude😂 3 years of hell but sometimes i miss it🥴 I’d also add, when balancing you don’t want to counterweight the wheel, “it’s only .25” but at that point why even add it??
Bro I've been at Tire Discounters & now S&S tire. You said everything I was thinking while watching. & the other guy talking bout counter balancing is right too. Subtract from original weights if its telling you to put it on the opposite side of where the original weights are.
100% agree
Agree with this guy I work at discount tire
For One mil he should make a new intro of all the cars he has own
Boi
Yes
It’ll give kids seizures
personally i love the original intros
Nooooooo
I can’t wait to see the race truck race again it has been so long
For the balancer, when you arent putting tack on weights on the outside of the wheel you use the inside measuring arm twice. Once where you normally would and once as deep in the inside of the wheel as you can where you will be putting the second set of stick weights
future reference 6:38 careful with wheels that have tmps, in that position you may break the sensor from the stem, makes good practice to do it even when the wheels don't have tpms to put the stem vertically! awesome vid as always
The truck intro. Haven't seen that in a while.
This is one of my favorite videos...car guys just bullshitting in the shop. I absolutely love it!!!
I went to school for auto technician and when teaching us how to replace tires my teacher said lube is your friend
Yes always be generous lol I learned that in my high school auto class
little soapy water is all it takes
Lube is always your friend 😎
@@Hardgoan You do realize you didn't have to post this.
I think every teacher says that lmfao
You guys should totally go through different TH-camr shops and garages and show it off cause when you guys said that I was intrigued. Would be cool to have one channel with a collection of videos what having a passion and building following on social media can accomplish in this day and age.
As a tire technician, I loved today's video lol. Can't wait to see what you guys do next!
Buy some angle die grinders with buffer pads for the corrosion on the beads of the rims, use soap for lube on the tires if they are tight, look for some rubber covers for the ends your tire tool so it will never scratch a rim when it makes contact or when pulling the tool out you never have to worry I’ve worked tires buddy and knowing how to do it and doing it yourself whenever is gonna be so nice great job!
Hell yeah. Can’t wait to see the race truck back in action🇺🇸🇺🇸
Same
Probably my fav on the channel & the Camaro
I hope that all who comes across this message get rich and achieve their highest dreams, my dream is to be successful with my videos, bless up and have a great day
Subscribed
No dream is to far keep grinding
That’s dope man
Keep grinding bro. Same for me! I want to be just as succesful. We'll get there.
Thank you You too!!!!
Gavin justa heads up, when firstly de-Beading any tire, make sure you don't do it anywhere near the valve stem. If you de-bead near it, there is a possibility of hitting the tpms sensor and breaking it and they aren't cheap lol. Love the videos!
Also, most tires you can only pop the front bead once and push the rest of it down. Back bead usually needs 2 pops.
I love how they change the intro depending on the “hero car” of the video!
Pretty sweet getting those machines like that! Living the dream my friends! Living the dream!! Enjoy!!!!!!!!!!
i love andrew slowly becoming a car guy. probably one of the cooler things to see
Gavin I BEG for you to read this. look bro, I have been watching you since 26k and seeing you improve after months of not watching you, I realized damn.. this is the guy that inspired me to get into cars. When i seen you got your McLaren I cried. When you sold your Camaro, I cried. When you got it back I cried. When you got your mustang, I cried. Look bro, Moral of the story is, THANK YOU. And congrats for almost hitting a million. I remember when you hit 100k. Man that felt unreal. Ik its a bit wierd but, you have seriously inspired me to get into cars, and i now have dreams of opening a shop where i do Welding and well, for mechanical purposes in general. God Bless you Gavin. And again, thank you
I support itsjusta6 so much for the simple fact that Gavin is coming up and is bringing his brothers up with him
My dad owns a mechanic shop and I worked there for 2 or 3 month and it’s fun cause I’ve always wanted to learn how to work on cars but that’s also why I watch your channel to learn more
Heck yes! i found the channel because of this truck and im really excited to see it finally come together.
Gavin making big moves Proud of you guys glad to see you guys doing well! Keep it up!!!!!
Best names for the cars in your shop are
BBC (big black car): GT
Blue ball: McLaren or the Roush
Semen Demon: Truck
Watching this on my lunch break, grind never stops
This is badass, i remember when i first learned to use one of those tire machines at the beginning of the year at my technical school
We want more old videos man you just buying supercars and we miss the old videos of the shop working on cars and racing
Gavin I suggest getting a grinder with a wire brush attachment for wheels.. hit the pedal and let it eat while you hold it on there. I do it every day and I couldn't imagine a wire brush lol
You should build or buy a running engine stand, that would be dope!
cant wait to see the race truck coming up
Is it me or is this deja voo😂 I swear we’ve seen this video already from a few months back
right??? i thought it was only me
Manuel Aldaco 3:30?
I think they put in some clips from a timeout video and they uploaded this vid late
Yoo wait fr..
“I thought this was the new xbox”-Rob 😂😂😂
Hell yeh finally race truck time and hopefully drag stang soon nice work gavin and the 6 media crew you guys have done well and keep up the amazing work guys. #respectful crew #friendship
Yo. When you’re breaking down the tire, start opposite of the valve stem. Keeps the tire sensors intact👍
Damn, I'm blown away by the editing alot on this channel, it's freaking cool 🤙
YESS OMG IVE BEEN WATCHING THE OLD TRUCK VIDS
This feels like a timeout video not a main channel video
Hell yeah . Can’t wait to see the race truck back in action 🇺🇸🇺🇸
Nicest tire machine I’ve ever seen and I’ve seen at least 3! Man your shop is pretty impressive, I called about one close to me that’s vacant (just to see what they go for) in hopes that someday I’ll be able to do something similar and dang... $4,800/month for 12 months and would have to be built out. My TH-cam presence would have to change A LOT for that to make sense. We can all dream though can’t we?!
Yes. RACE TRUCK CONTENT. this is my favorite content because I drive a truck.
Nice car machines btw. That wheel balancing machine with the laser. Sweet
Pro tip, when breaking the bead on cars with tpms, keep the valve 90deg from the shovel/ blade/ bead separator at all times to keep from breaking the sensors
We have an fully automatic tyre-machine at work, its all fun and games until it does what it wants. Its the best machine ive worked with so far, unless it stops working like its supposed to do, i think the machine is called like ,,Monty Quadriga 3000" or something
Thank god! I’ve been waiting for this truck to have a new Heart!
SEMEN DEMON IS BACK
Love the name
Hey gavin probably wont see this but a little tip for the future if you have corrosion in the bead take tire off mount wheel on balancer do a free spin and just hold the wire brush on the bead and continue until all corrosion is gone alot faster
Oooouuuuu yeah!! So glad to see Doug back on videos!
Man its awesome to see how far you've come since I subscribed
That's one of them fancy limited hands on type of mounting machines, I used a Corgi brand one very similar to it, damn machine it's self cost 35k
Tip Gavin, I always break the beads at 12 o clock and 6 o clock because TPMS sensors, it's a good habit to get into
Been doin auto stuff including tires for about 6.5 years, it's a passion of mine
Thank you guys for showing us how exactly you change and balance a wheel/tire! Gavin ftw
Y’all should do a diesel build on a cat eye or similar year Chevy
Lbz crew cab sierra would be rank
Her Gavin, a little advice, when you break the tire off the bead make sure you have the valve stem at the top or the bottom so you don’t break any tpm sensors. Just looking out bro
I seen they finally got the Hellephant engines in, at some shops! I would love to see you do a build giveaway with one of them, or just build a badass track car with it! Maybe buy a vehicle that needs an engine from www.autotempest.com, for the build! Would make some awesome vlogs!
Damn now we gotta wait a whole year to see another truck video..
Dude, my dream job is to haul cars around for people and I would LOVE to haul the giveaway cars for Gavin, I wouldn't even charge him for doing it.
I work for Discount Tire in Arizona, we have to do all of that. In the matter of 15 minutes max for 4 new tires. Not matter the size.
Gavin: I got a new motor hopefully it doesn't blow up
Next video how I blew up my new motor
Finally!!! The race truck update we’ve been waiting for!!
thats a nice as tire machine. i'll straight up move to louisiana and be your dedicated tire guy. ive been a tire tech for like 2 years lol
I want to get myself a Mini, now I see 2 in first 2 minutes in video of my favorite YT channel. I still don't know if it's reliable enough and right car for me.
Get an F56, NOT an R56, and you'll be fine.
@@richardhammer187 Is it that much different? I don't have much of a budget to be honest. I can afford 2011 R56 jcw or at same price 2015 base model.
Got my first 5 speed a week ago and i love it
That's awesome to see y'all going from a bunch of goofballs to a working army in 2 seconds getting that machine off.
Rob @ 2:38 - He attacc, He protecc ❤
"Stabbing plastic wrap"/Homegirl doing the mural like y'all boys weird 🤣🤣 ima do me
I really hate the uploading delay but its fine after seeing Doug 🥰 i really missed him 😔
Love all the plugs my man gavin is getting!
Who else's cant wait to see his truck built up that thing is badazzz
Man about damn time this is my favorite out of all the cars you have 😂
finally some race truck action. thank you
Why do I feel like we gonna have a 2000 horsepower automatic pro charged race truck with Nos in the bed ready to smoke any supercar Humm...???!!!
But still won't run faster than a 9 😂😂😂
@@calikushington ItsJusta9
Glad to see u Doug we missed u man
Finally the truck I was waiting for this video for long time
When is the alignment rack coming lol
Yes the truck is back on the channel
Get a type 07 FFL and attach a Type 2 SOT, you can build legal new Machine Guns, and cans shipped in under a week
I would have had to walk away on the viper situation too man. You just don't do that to somebodys car especially one worth more than their life savings lol
He needs a drift car
He would drift it into a wall
Drift cars are kind of outplayed right now. Everyone and their brother has a drift car now.
Anything for content
No drifting is boreing to watch
Daamion Vills shitty drifting* is boring
EXACTLY what I've been wait for to come back😎😈
Learned being a tech at firestone. When you have inner and out weights being called that close, spin your tire 180 degrees and rebalance it. Your goal is the least amount of weights possible.
Just got my DLS hoodie right before this video
"If you melt the piston down give me a call" 😂 might be my senior quote
Yes!!! My favourite build is back
1:36 thought this was the new xbox 😂😂
Hey y’all so sorry it’s been a long time since I watch y’all video. I’m still a big fan and kind of bummer I’m back home lol so back to reality 🤣🤣🤣🤣 but I love the vids and y’all are an inspiration to me. I have an idea to build my big shop hopefully soon. Great job all of you.
How big of tires and rim can that machine do up too?
That tire machine is nicer than the ones at Fountain tire 😍 I'm also gonna ignore the fact that Gavin broke the bead with the valve stem at 3o clock
OH HELL YEA the truck is back!!!!🔥🔥🔥
"Melt the pistons down just give me a call." 🤣
From someone who worked at discount tire I wanna go and use that changer and balancer get 4 tires done in under 20 min lol
Hey man just wanted to say I really really enjoy your videos, I have been a subscriber for a while, and you help motivate me so much to get out there and learn more about cars and work hard to get one some day. It is my dream to have a nice car that runs and will take me places. I really hop that you can see this message Bc you deserve a lot of congrats on your new car and all the hard work that not only you do, but how hard your team works. My dream car is a mustang gt, and thanks to you I have fallen in love with that car too. Hopefully you could find a knew home for your mustang, I also love the intros keep up the work and thank you again for helping people out and always spreading kindness and your big smile I love it bro.😁😁😁
It would be cool if you reached 1,000,000 subscribers by the end of this year and the Silverado intro is just as dope as the OG Camaro intro
Yo these videos are made so GOOD.
race truck: Autocross?
Gavin: 🤭
Gavin If you read this can you give us an update on drag strip content? It’s been something I’ve looked forward to see you doing since you took the gt350 to the strip and it would be really cool to see the black car on one again
About time we got some truck content
Finally more race truck content
It this that trace guy from time out??
Lol
Yea it is lol
How dose he not know
yeets ketts it was just a joke, cuz when he started those things he said “it would be so cool if some one recognizes me from time out”
@@dailyshreding9393 😑
Who else misses the old content where there was actual racing.
Can't believe he actually wants to quit racing all together SMH
Hey I'm gonna have to say that slime shit does work when in a pinch. My gf had a tire go flat we didnt have money for a new tires so I inflated it with slime and a year later that tire is still holding up.
The race truck is back!!!!!
That poor viper ain't never goin to be the same!!! Poor viper man for real