Design and Implementation of Controllers using Matlab | SisoTool | Compensators | Control Systems
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Design and Implementation of Controllers/Compensators has been explained using Matlab. A lead compensator has been designed and implemented as an example using MATLAB Sisotool! Do mention your queries/comments in the comments section.
#Controllers #PI #PD #Lead #Example
This is exactly the kind of tutorial I had been hunting for ages. Everything so well explained and 100 times better than my professors. Thanks so much, you just saved my day!
You're welcome! 😊
Thankyou!
Man you are better than mine proffesor. Really good and slow explanation. Thank you very much! They do the same example with you. You are so much better.
Thankyou brother, I am glad it helped :)
Words cannot express how grateful I am for this video. I’m taking a second semester of control systems, and we are hitting that lab, particularly sisotool, very hard. This is really good. Thank you again.
You're welcome, I hope it helped :)
@@KnowHow72 - it was a HUGE help. Thank you. just walking through the steps and pointing out the PD controller function was great. Showing us how to add a zero and adjust it to get the root locus line to intersect the constant damping ratio line was a life saver.
thank you so much for great informative video about SISO tool. :)
Great work Sir! Thank you... Kindly upload the paper work calculations of this design as we have to submit our CEP in next week
Thank you very much for this work
Great work .keep it up
Thankyou :)
Thank You sir..Your video is very Helpful..
You are most welcome!
Very Helpful Sir, Thank you very Much
You're welcome :)
This has really helped me. Great work sir. I would love to have a look at the paper work for this
Thankyou! Sure we will upload it soon!
Please don't forget to subscribe :)
Osm
Nice
Thank you!
Thanks bro appreciated on yr works
Always welcome
geart
Thankyou!
merci sir
Shammas Javed
170701
BEEE-6A
Ali Hassan
170906
Beet 6A
Your video is good indeed. Can you please tell me the version of MATLAB you are using?
Thankyou for the compliment. The version is 2014.
170817
Present
Sir, why my matlab doesnt come out with two windows like that when i type sisotools ? and there is no menus/ribbon/toolbar when sisotools window appear. did you know how to fix?
using matlab R2020b
There's a slightly different interface for that version of MATLAB. I can help on Anydesk if you are unable to understand it
@@KnowHow72 how is it?
170752
syed yawar imam kazmi 171003
hello sir can you please help with this on matlab your response will much appreciated
An uncompensated unity feedback system with certain deficiencies has no zeroes and poles at -1, -2 and -5. Answer the following questions based on the above description of the system
a) Determine using an apt technique, the gain of the system at damping ratio 0.45
b) Include a series compensator to the uncompensated system with zero at -0.0111 and pole at -0.01.
c) Include a series compensator to the uncompensated system with zero at -0.1 and pole at 0
d) Display on a single plot, the step response of all three systems above.
e) Tabulate the settling time, rise time and steady state error for each of the three systems
f) Discuss the results obtained in 1(e) with respect to the steady state error and the compensation used.
Sadaf anwar 170804
Talha nadeem 170780
OsamaAlam
170682 BEEE6B
170733 BEEE-6B
171003 yawar beee-6a
170740
BEEE-6B
Sir kindly extend the deadline for lab#09
Okay! I will extend it :)
Sir kindly set the deadline after 8th June because university is officially off till 8th
Don't worry about the deadline! I will extend dates beyond 8th Inn Sha Allah!
Thankyou 😃
Hi thanks for the vedio.
How can i know my equation System? If i have a Modell
You can see the location of poles and zeros from the model and thus make an equation easily from there!
Murtaza 170771
Sir ,can you also upload the paper work method of this question ?
Inn Sha ALLAH Soon!
170705BEEE-6A
170654
170909
170704
170674
170859
170683