WI-fi controlled wireless robot car with NodeMCU ESP8266-12e using Mert Arduino Application
ฝัง
- เผยแพร่เมื่อ 1 ธ.ค. 2019
- In this project, we will make an IoT based wireless Wi-fi robot car using the NodeMCU ESP8266-12e Wi-Fi board with the L298n Motor driver module. We will interface this Wi-fi Car with Mert Arduino application in which by entering the IP address, you can control by giving the directional command using the smartphone.
📦📦📦KIT INCLUDED📦📦📦
Node MCU (esp82 66-12e v1.0) Wi-fi Board -1
L298N Motor driver Module -1
Jumper wires (male to male) - 20 pcs
Jumper wires (male to female) - 20 pcs
170 pt. Breadboard -1
Micro USB cable-1
1050mah rechargeable battery Li-Po battery -1
2-wheel car chassis kit -1
💽💽💽Software Required💽💽💽
Arduino IDE 1.8.10 (programmable platform for Arduino)
Click To Download: www.arduino.cc/en/Main/Software
💰💰💰Purchase Link💰💰💰
rees52.com/learn/4905-make-an...
📃📃📃USER MANUAL📃📃📃
rees52.com/learn/4905-make-an...
🎁🎁🎁Discount🎁🎁🎁
Get 5% discount on your first purchase, Use "FLAT5"
💻💻💻APPLICATION
💻💻💻
Mert Arduino for robot car
drive.google.com/open?id=1K60...
💻💻💻ESP BOARD INSTALLATION
💻💻💻
• IoT Revolution Kit - E...
💽💽💽CHASSIS ASSEMBLY TUTORIAL💽💽💽
• 2 Wheel DIY smart Robo...
📝📝📝CODES 📝📝📝
Before uploading the code, you need to check the IP address that we will enter in the application Mert Arduino
✒️Check IP address
drive.google.com/open?id=1vAT...
✒️Now, upload the main code
drive.google.com/open?id=1XaU...
🔔🔔🔔SUBSCRIBE🔔🔔🔔
For more tutorials subscribe our channel REES52 on TH-cam
/ @rees5286
What is the added on sketch
How u powered the nodemcu
from the L298n Motor driver module