Make a Digital Display alarm clock using 16*2 LCD and buzzer interfacing with Arduino Uno
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2020
- Subscribe our channel to get more videos
/ @rees5286
Welcome to Our Channel REES52
In this project, we are making a Clock alarm using push-button and 16*2 LCD Display with Arduino Uno.
Here 4 push buttons were used where 2 push buttons to increase or decrease the value and other 2 push buttons for ‘set time’ and ‘set alarm’
📦📦📦This kit includes :📦📦📦
Arduino UNO with USB cable - 1
LCD 16*2 - 1
Potentiometer 10k - 1
Breadboard 830 points - 1
Jumper wires male to male - 20 Piece
Jumper wires male to female- 20 Piece
Push-button - 5
Buzzer B10 - 1
Single strand wire 2m - 1
You can purchase all these components from our website www.rees52.com
💰💰💰Purchase Link💰💰💰
rees52.com/diy-modules/768-ma...
🧾🧾🧾User Manual🧾🧾🧾
rees52.com/diy-modules/768-ma...
🎁🎁🎁Discount🎁🎁🎁
Get 5% discount on your first purchase, Use "FLAT5"
📝📝📝Codes & Library📝📝📝
all of your videos is good and useful for me thank you.
thank you so much it helped us a lot
Great video, I built it. Can you please advise, how to increase alarm duration? I increased "tone" parameters but nothing seems to work. Please help
thank you so much
amazing video haven't built yet
Woov thanks for this project.. please add date to it .. is it possible
we need to see what you did on the code
Hello mujhe aapki help chahiye
Ye jo aap Arduino Uno use kr rhe hai ye iska poora name with model btadijiye
Like ek Arduino Uno hai and ek Arduino Uno R3 hai so konsa use Krna hai is project mai
says i need acces when i try to open the code
Hi plz reveal full code
can u show how to stop the alarm
can u share the picture of the diagram
I have a question for the LCD what is the connection if I use the LCD 1602 module?
Did you figure out the connection if using a LCD 1602 module (has the I2c)?
@@brandonkalathil9694 yes, thank you..
hey, wanted to ask, why have you used the potentiometer? genuinely curious....
to control the contrast of the lcd, you can connect it to the gnd directly in this scenario the contrast will be 100%. To manage the contrast we use potentiometer
coding link or any file is not available
woah thx thx thxxx
Block diagram for this project.
RTC should use
I can’t find the complete code
Found the components......what is RS 1699 in Dollars??
HEY, CAN WE USE OTHER JUMBER WIRES INSTEAD OF USING SINGLE STRAND WIRES
obv
Code isn't coming
I had ordered subwoofer amplifier board from Rees 52, they are not answering my mails nor attending my phone .
Can't find the code. Can you please share us the link?
its in the description
were is the code
Wheres the code maam
I pay money in rees52 but my order isn't show in your site
Your order is delivered
@@LetsMakeTechnology yes
How much time your order delivery?
madam can you post the code please
where can i get circuit diagram
you can see it from the video then take a screen shot and send it to a printer then copy it when your father and mother accept to copy it or take a screen shot from the video about digram without copy it
@@osamagamal-hf9ri sir apko to English bhi nahi ati. Why you r involving my mother and father it just shows that your upbringing is bad
so , take a screen shot from the video without copy it or with copy it by yourself .
Code???????
where can we see the source code?
on www.rees52.com
@@rees5286that is not the code please can you post the code we really need it
can u please give the source code
do you want to get it ? you can copy it after take a screen shot from the video and send it to a printer or take a screen shot from the video without copy it
its in the description
where's the code ma'am its not in the description anymore
+1
मेडम इंडिया से हो तो हिंदी से बोलो आपके जैसा बहुत अंग्रेज पहले से है । हिन्दी से बोलो गी तो वुई आएगा
असुविधा के लिए खेद है। उपशीर्षक (Subtitles) हिंदी भाषा में उपलब्ध हैं !
Yeah but if you speak Hindi only Hindi speakers can understand but if you speak English a lot more can understand you
Provide the source code plzzz
AGREE
@@jeffloojiacheng-4646 yes where is code