EASY VQ37 Engine Misfire Fix p030(1-6) Code
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- How to fix a p0301, p0302, p0303, p0304, p0305, p0306 on VQ37 engines in the Infiniti and Nissan G37, 370Z, and some Q50 and Q60 cars. 350Z and G35 cars are probably similar, but likely a different part number. This video is if you have a single cylinder misfire, not a multiple misfire. A new Hitachi coil pack should fix your issue! Here is the part number:
IGC0078
Different years and models may use different coil packs, but my car is a 2010 G37 sedan and this is the part I used.
If this video helped you, please like and subscribe to support the channel!
Shot in 4k 60fps
I had this same misfire issue. The "service engine soon" light would flash when i accelerated and the car exhaust sounded terrible when i accelerated and had no power at all. I cleaned my throttle bodies, cleaned MAF sensor, changed spark plugs, changed all six coils and my misfire was fixed. My car also feels a lot more responsive and faster after doing all these things. So to anyone having this issue, do all the things I said in this comment.
so I took my spark plugs out and I think it had gasoline on it I changed the injectors I didn’t change the spark plug nor the coil packs do you think it could be those it’s still weird how there’s gasoline on my spark plug
So I have changed all the spark plugs, all the coils and but I changed all 6 coils and spark plugs to be thorough but I’m still getting a rough rough engine, anyone know what could be still causing the rough ride? Once I pick up speed it gets a little better but when at stop lights it feels like car is about to stall, changed battery too and no luck, any help will be appreciated. Thanks.
I just paid 350 to have all my exhaust leaks fixed after my car was sitting for a whole, I also had removed my exhaust prior , issue remained, took it to get scanned and this code came up, I’m sure this will fix my problem
Thank u so much, had the same problem in bank 3, i changed out the coil and the problem went away, i appreciate the help.
I have to say thank you due to this video i had a misfire on cylinder 3 and I swap it and it works like a champ !! Thank you so much for this
So I have changed all the spark plugs, all the coils and but I changed all 6 coils and spark plugs to be thorough but I’m still getting a rough rough engine, anyone know what could be still causing the rough ride? Once I pick up speed it gets a little better but when at stop lights it feels like car is about to stall, changed battery too and no luck, any help will be appreciated. Thanks.
Thanks for info
Hey how did you get the check engine light to go off?
Bolt snapped off how can i get it out
changed the coil pack. Car def runs way better now but code still comes on for the same cylinder missfire. Anythoughts?
Did you clear the codes? Maybe try changing the spark plug too?
@@NicksCarHistory yeah cleared the code, and still detects misfire after driving it a couple miles . I changed the spark plugs like 30k miles ago but I am changing them again this weekend
@@henrymeyer4102 how is is it’s drovikg now ?
@@shavoysamuels8448 had to change the spark plug as well, then which was covered in oil. had to replace the gasket and now it’s running good
@@henrymeyer4102which gasket ? I’m having the same issue. I thought it was my speed sensors causing this and making me rwd but it wasn’t that causing the SES and misfires