Flysky FS-G7P 7ch ANT protocol car/boat/tank radio: Detailed review + setup
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2022
- Timer Setup: 41:24 , Receiver Bind: 55:04 , Sensor Setup: 1:09:46 , iBus Setup: 1:22:43 , 4 Wheel Steering 4WS Setup: 1:29:45 , Bugs: 1:40:00
Flysky FS-G7P Ant protocol radio: www.banggood.com/FlySky-FS-G7...
FlySky FS-R7P 7CH ANT protocol receiver: www.banggood.com/FlySky-FS-R7...
FlySky FS-R4M 2.4GHz 4CH ANT Mini RC Receiver: www.banggood.com/FlySky-FS-R4...
Phone/Camera-holder for FS-G7P radio: www.banggood.com/FlySky-Remot... - วิทยาศาสตร์และเทคโนโลยี
I have just bought a G7P, and without this excellent video I might have gone nuts... So thank you! 👍
Superb and very clear video. I was looking to set up my 4WS Axial Capra and assign each mode to a switch.
Schöne Grüße nach Österreich und danke für die guten und ausführlichen Beiträge!
Great info and thanks for the bookmarks. Came here to see about how to manually setup mixes for my 4ws - didn't realize it had a whole pre-built setup! Nice.
You don't set up mixes. you put it on a proportional channel and steer just like the front.
I was struggling to find how to set the switch to swap between 4 wheel steer modes I think I tried the 3 other modes but not cut, then found your video thanks
I thought cut would be off hahaha 😆
So much for this budget radio control system👏👏👏
You can use the USB-C to connect to a PC and play simulator games. I have been playing VRC and it works very well. You also do not need batteries if it is connected to USB-C.
Great info as always
Very great information, thank you very much,,
Also if you hold the lap start button eg SW2 it will reset the timer,
I was re watching you video as I seem to experience issue with loosing bind on the r7p after changing models, haven't sorted it yet
MUITO BOM. PARABÉNS
Your video was very detailed and informative! I was able to get my radio setup and its working great!! :)
... and should have been about 1 hr shorter ;-)
Video is nice would be even nicer if the high glare plastic was removed from the radio screen it’s hard to focus on what’s happening.
Yeah, probably ;-) - I am one of those guys who always leaves those plastics... should better have removed it.
nice video, I have also had the transmitter crash and reset like yours does when I attempt to use the BVD...
Muy buen video. Aunque tiene la opcion de fin de carreras, la opcion de dual rate es para dar otro valor y con un boton asignado, podemos poner el valor real o ese que hemos marcado en dual rate con solo apretar un boton. Gracias y saludos.
Great information. I like the 4WS rate that you covered in this video. I was hoping to forego the ST mixing feature, and control rear steering with KNOB VR1 is that possible if ST mixing is not set?
Would not know why not. Simply connect the servo of rear stear to an channel and this channel to the knob. For sure will work.
@@donaldsneffe I will purchase and give it a try.
Schön langsam kenn ich mich aus 😜
Bist ja noch jung, hast ja noch Zeit ;-)
This joke survived Google translate 😂😂😂
@@thindigital 🤣
@@thindigital Wow "You're still young, you still have time" - really correct, even it is a kind of slang...
The reciver it comes with is auto bind . When you bind the recivers you have to set your model and begin to bind on the remote then turn on the new reciver power,it will auto bind.
You are sure? Did not test, did not check. It has a bind button and you can bind with bind-plug. My receiver has a dead bind button, as I showed in the video. I bought a further one meanwhile, in this the bind button works. You can also bind with bind-plug (I did in my rx 1). The tiny micro-receiver is autobind, see my video.
@@donaldsneffe That is my understanding too... need the button for the included RX.
Great and very detailed info,do you know if this radio will work with Futaba GYD450 Gyro?
Thank you. Sorry, I do not know.
I have a manual that says it is for both the FS-VK-G4P and the HRZ00014 transmitter. It says they are ANT protocol systems. Given that, can you bind the FS-G7P to the HRZ00015 esc/receiver combo (Axial version 2)?
Guess no, only works with the tiny Flysky ANT radios (FMS, Hobby Plus). But cannot test anymore, don't have this radio anymore.
I got my receiver to bind with the bind button I had to hold bind button down until receiver starts flashing fast and then it will turn solid light and then it's connected. It took me a couple times to get it but mine did bind that way just have to hold the button down.
It worked with my 2nd receiver (which I bought later), too. But this receiver which came with my G7P has a broken bind button.
Will this radio work with the 2 in 1 Flysky’s that come in the FCX24, HobbyPlus, Fuirtek etc?
No, unfortunately not - even if both have ANT protocol.
@@donaldsneffe Thank you, that is too bad.
donald, do the fs g7p also bind with the receivers from a fs gt3b?
No - GT3B/C have AFHDS protocol, FS G7P Ant protocol.
@@donaldsneffe good to know. i use now a flashed gt3b, can use now 8ch... but its not easy in use, all 'strange' buttons on strange places...
than is a gt5 better choice for me
@@tijdrovers68 GT5 receivers also will not work with GT3B. AFHDS 2A protocol. I have a flashed 8ch GT3C. There is a top thread (in German) explaining programming. www.rockcrawler.de/thread/25139-fs-gt3b-anleitungsthread/
@@donaldsneffe i flashed my gt3b to. worked great, but i don't like the knob positions. i use 6ch receivers. i thought they worked also on the gt5...
@@tijdrovers68 No, unfortunately not.
check out the new WFLY X9 2.4GHz 9CH FHSS verce man
I did already order it more than 1 month ago, few days ago it has been shipped from China, should arrive soon - will make a video ;-)
Can my friend help me with my flysky 7??? 2 months of use, the main button is still not working, it only works downwards and nothing, but I can't enter the configuration.
If you cannot give it back to the vendor for repair I would open it and check the button from inside.
😢The seller even said to send it and see if it can be repaired, but as I live in Brazil it is difficult to send it to China because there is a risk of fraud and it will take more than 40 days. On the side there is an input for a type C connector, what do you do now?
@@AlexandreSilva-pk9wk Sinto muito, mas eu não sei - abrir, inspecionar, tentar concertar o botão... dificil.
Tolles Video👍🏼Gibt es dich auch in deutsch🤔🙏🏻
Nein ;-)
Can That radio replace a fs-g4p ?
Yes, receivers will bind and work.
@@donaldsneffe I own a rgt crawler that uses a receiver/esc unit from flysky. That unit is a cooperation work with hobbywing.
I hope the fs-g7p works.
@@germanopinheiromartins4547 It works with Reely Gen4 radio/receiver which for example do come with Reely Freemen 2.0 crawlers. I tested this. If the radio looks the same (as for example Reely Gen4 radio and receiver), it should work. Good luck!
@@donaldsneffe I’ve checked that freeman. My remote control looks the same. 👌🏻
Most garbage radio ever. The OS is garbage. The pots are even worse garbage. Jitter on both steering and throttle. Only good thing about this radio is the proportional knob that works great for rear steer. Other than that, this radio is not worth the plastic it's made of.