What Are Aux Channels and How to Set Up Flysky FS-i6X Aux Switches
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- Wondering what "AUX" switches are? This video is for you! I'm going to explain what aux channels and aux switches are, and show you how to enable them on your Flysky FS-i6X transmitter!
In case you're looking for a great budget radio,
FS-i6X with receiver www.banggood.com/custlink/3vv...
amzn.to/2KkLlxz
Please buy through these links to help me keep this channel going!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects! - วิทยาศาสตร์และเทคโนโลยี
![ทัศนศึกษาโรงงานผลิตโค้ก [THAI/ENG SUB]](http://i.ytimg.com/vi/M9y-TJBNem0/mqdefault.jpg)
This was super helpful, explained very clearly, and gave me exactly what I was searching for. Thanks so much!
I have this transmitter and your videos have been extremely helpful. Fixed wing is my thing so videos referring to that topic are most appreciated.
That's great! More fixed wing stuff coming up!
3rd video ive watched, and tbh, the only one worth watching. I am pretty new to rc and know nothing, you have just not only taught me how to assign the full 10 channels, but made it so simple and excellently narrated as you went through the process.
Thank you
Good stuff buddy. Very well explained, no crappy music, good visuals. Told me everything I needed to know.
Thank you so much,no one explain RC stuff as clearly as you do, Great presentation & talent, very professional.
I agree. This is an excellent video on how to do the basic setup. I'm looking forward to visiting your site to see what else you have posted. I'd like to see a full video on setting up head tracking, if you are looking for a topic.
I just got this Transmitter, and I am really excited to start flying!
Same here. Starts tomorrow
As usual, a great vid and explanation for us techno challenged people! Thanks, Adam.
Hi Adam great video easily explained for a novice like me. I had tried to make these switches work without success but thanks to your knowlege I now have working accessories on my model boat.
Glad it helped
Great vid. I’d almost started messing with firmware when thankfully I found this video!
Very well done video - super clear instructions. This really helped me out!
this has answered a lot of things and has enabled much more functionality
I recently picked one up and wanted to use the aux switches, this saved a lot of time, thanks.
glad I could help!
A very simple video for a complex problem thanks a lot
Thanks so much. This was very very helpful and got me going.
Most easy way to understand this upgrade,,,Thank you very much!😊
Great video! Quick and to the point.
This saved my life, I didn't knew you had to activate the switches
Just bought one of these Adam, great set up video thanks.
Glad it helped!
Thanks for a simple explanation for aux switching .. cheers
I ordered one. When it gets here I'll need your help to learn how to set up everything. Thanks so much. See ya...
Great video, very helpful for beginners.
Thank you so much, never knew there are more settings.
Super helpful, like many others of your videos! Thanks!
Great video and I really appreciate your effort
flawless video!! super helpful thanks
Thank you so much for this! May I make a suggestion of perhaps setting it up for tank like steering for RC ground models? If you haven’t already? (left stick controls forward backward left and right all on one mixed control. Right stick controls camera or possibly a little turret
This was very helpful, thank you very much!
You are ver very welcome! 😊
Excellent explanation, thank you.
just purchased one of these from the link you provided on another video. Need as many tutorials as possible. Will bind it with a mobula 7 i got on banggood. Looks like it will take several months to get here for some reason. Thanks for reading my life story. LOL.
Hi, Joe! Thanks for using my link! More tutorials are on the way!
Thank you so much, again very helpful , a born teacher.
this was a great help. Thank you!!
Thanks for a simple explanation well done chee
Liked the video! Few questions though. Are some of these channels Digital inputs or relays? And what are variable knobs? Resistance?
Very helpful content, thanks.
Mine came from Banggood perfectly packaged and all channels including Aux channels were fully setup. I bound the receiver to the quad and absolutely no setup was required on the transmitter including end points ect. Amazing.
Wow! Which quad?
@@RCwithAdam1 I only bought the radio, using it for a freestyle quad I already built. In Betaflight all I had to do was choose IBUS and everything else was perfect but I did have to setup modes. I didnt need to do anything on the radio.
Yassss - oh finally. Thank you so much for this video - finally got it working - total legend. Is there any way to feed the RSSI through one of the channels so i can get RSSI through the OSD?
This was very very helpful.
Very helpful video, thank you very much!
Excellent, helpful video
Great Video! Thank you! I'm programming channels 5 and 6 for a robot
Robots are cool! What does your robot do?
It was really helpful. Thanks :)
I don’t see the aux switches settings all I see is factory reset
Me too :(
Same
Very useful, many thanks.
Have Fun,
Joe
You're very welcome!!👍
Great information on setting the switches. Not in the manual. Kudos
Glad it was helpful!
I enjoyed this video . I subscribed .
First rate and great explanations. Thanks.
Glad it helped! 👍
Very helpful. I had to play catch up a few times!
Thanks for the vid very helpful
Thank you bro very helpful
thanks, very helpful. great video.
Hey Adam , I'm Tim . I just finished changing my FS-i6 into the FS-i6x from watching your other video. It took awhile but was able to get it done . Now I'm trying to assign my switches back the way they were before. I had switch (A) or your (5 aux ) as you have yours set up in this video . as normal and sport mode for Ail. Elev. Rude. With dual rates . Then switch (B) your (6 aux ) as a safety for my throttle. Motor would not turn on if the switch was down . Then I was using (D) your (8 aux ) for trainer/student mode . But now I can't get the motor safety switch (B) to work at the same time as as the sport mode switch (A). And I was watching this video for help but because it's not a FSi6x it's a FS-i6 with the mod to 10 channels. It doesn't have the same listing for aux switches. It doesn't have that option after factory reset in your video. So can you help me figure this out ? Let me know please 🙏 lol 😆
Thanks for the video buddy,
May I know if you know how to use the 3 position switch in a3 pro gyro?
Thanks for the information!
You bet!
Thanks! I was confused...nothing I tried worked.
Glad I could help!
Thanks for the information 👍
Very helpful, thanks!
Thanks for the video Adam, is there any way under assign switches , Idel Mode to VRA, I am only seeing the option to assign SWA to D, Thank for any suggestions.
Compliments for your great tutorials! I learned a lot ,but................I have 1 problem setting up my FS-i6X:
I built a baitboat for carp fishing (very popular in the Netherlands) and I needed 2 motors to move the 2 feeding buckets (they roll over). I combined them with the AUX Switch VRB. This works very well, but the motors are going to fast. How can I reduce the motor speed of them? I hope you can help me out.
Best video on how to do this!!
Glad I could help!
Great content.. Very helpful..
Adam you’re awesome. Thanks for your helpful videos. Those printed instructions are worthless. Biggest problem for me is changing screens without screwing up stuff. I’m talking about changing pages or menus, whatever. Maybe you could explain that for us. Thanks so much.
Really helpfull! Thanks Adam!
My pleasure!
thank you, this was very helpful.))
Good video, very helpfull
Mate that was an awesome video
Thanks so much!!
Thank you sir .I need help regarding my rc 6 channel heli how to bind it with my 6x
Thank you very much, helped me loads
Great to hear!👍
Brilliant, mate. Understood.
Very helpful, thank you.
Glad it was helpful!
Very helpful. Is it possible to add a satellite reciever the unit?
I believe so, but I've never used one.
Hey
is there a way to set diff performance modes using the aux switches for a dual motor rc tank
like mode 1 will enable 50% motor power in all directions
and mode 2 will enable 100% motor power in all directions
mainly to have more precision on the stick while doing tighter movements
Hi Adam, I have a Flysky i6s I’m having trouble with the
Thx now i know what it means
I got this flysky 6 channel
For my tank but the aux switches in the manual are talking about 3 stands
But the transmitter has only 2 stands for the aux like yours
Is that a problem ?
Hi Adam ,I know it's an old post or trends,but how do u do a mix on aux 4 for mixing rudder and alleron.What I need is to switch mix on and off
Hi, Adam. I'd like to program in a little rudder, and maybe later a little down elevator, onto SwD for hand launching a DLG. I've tried several things to no avail. What's the trick to make this happen? Can you help?
New to FPV I have a fs-16x I am using Liftoff to learn, I would like to setup the transmitter for my X220 drone what setting should I change.
Is it possible to sway the dials for a switch or a regular switch to a 3 position? I'll probably end up feeding an Arduino with the receiver
Thanks man! Perfect for what I needed to know. The Flysky PDF is terrible.
Good tutorial thanks.
You got it! 🙌
Can you assign the throttle channel 3 to an AuX channel ? Please let me know and thanks jb
Hi Adam,
I'm confused about something. When you enable the extra channels, how do you then use a switch for your dual rates? I like to have my rates on separate switches - elevator, aileron & rudder.
Hi, Rick! As far as I know, there is not a way to change the rates of channels individually--just all at once.
Great job I got it!
Good!
great video. thanks. very helpful. I would like to take it up a notch and program switch 7 to the FMS Reflex V2 ... 3 options ... beginner..normal .. advanced ... who can I do this? thanks
nice, usefull video Bro, thanks
You are so welcome!
Wuhuu detail...thnks vry much👍👍👍
Hi, I like your videos you explain very well. How do you setup the battery external(in the i6x)? Because mine around 1min starts beeping I thought maybe there's something to be set from the i6.
Thanks
Hi! Thanks! Does it only beep if you leave it alone? Because that's there to remind you you've left it on. Otherwise, if I recall correctly, the INternal battery setting will adjust the displayed transmitter voltage, and external is for the receiver voltage (I'll double check later).
@@RCwithAdam1 yeah I did change the settings in the rx external now its good
Hi, I have this handset, how would I program channel 7 to swb on the remote to switch channel 3 control between servo 1 and servo 2?
Channel 3 which is the left joystick up and right to control servo one with swb in the up position and the second servo with swb in the down position? Would the two servos be connected to channel 3 with a relay on swb switching between the two different servos? Cheers
This helped a lot!!!
Glad I could help! 😀
Very helpful
Excellent thanks for this 👍
Glad it helps!
Supper helpful!!!
the more time progress the more questions i have
what the maximum voltage can the reciever handle ?
and how to handle a 270 deg servo
it seem they require a wider range signal but nobody know how
How to make the alieron and elevator mix ? For example when I turn left and right with the alieron I want the elavtor to move up aswell . instead when I turn to one side the elevator goes down and when I turn to the other side it goes up . how to make the elevator stay up when I turn both sides?
Using a 6 channel receiver is it possible to assign channel 5 and 6 to the variable knobs
Thank you
got half of it done
Does this also have failsafe so if I lose signal, the servos go to a pre set position?
Super info.
Hi there, I am a beginner and do have a flysky i6 without x. I don’t find this menu. Is this not possible by my fs i6? I checked your other videos but I didn’t found a solution. Thx for your great work! Armin from Bavaria/Germany
Gracias me sirvió un chingo! 🔥