That laser high beam is literally over 9000! If you guys ever make a 2.5" MLED projector with the same bolt pattern as the Mini H1, I may have to get myself another upgrade.
I’ve been following y’all since I first started looking at doing a BHLM on TacomaWorld a decade ago. Thinking my Christmas gift to myself this year will finally be an HID upgrade. This is the absolute best projector video I have ever seen. Thank you!
Highschool and college i did retrofits using the acme's never had issues with them. Other than having to adjust the bulbs occasionally to improve the hotspots. Now i'm grown and i'm ready for some morimotos lol.
Not sure if this may help someone, but the Morimoto Mini HB also works as a drl in my application. Used on a 12 Civic Si, with a pulsed 9.6v circuit and it lights up not at full brightness but bright enough and does not pulse. No capacitors, resisters, or relay harnesses were used.
Ahhh, I should've known y'all were cooking up something good with all this calm, glad to finally see a break-down on all these projectors! Honestly though, the 6000k color specs of the MLed had me on the sidelines of whether I wanted to use it or not, but after seeing that beam pattern..... I'm sold. I think I'll be using it in my work van along with a DD SS3 fog light set. Appreciate the work guys, keep it up!
@@aidendickinson well I went with aftermarket lights because I liked the dark housing which was a draw back because I kinda damaged the headlight housing taking them apart out of the oven so when I went to put them back together at first they did not want to seal up very well I had to wrap the lens and housing with tape and let the glue dry on the ends what a pain,
This is very interesting. I wonder how hard it'd be to replace my 2nd gen mazda 5's low beam halogen projector with a bi-xenon HID. I just put in a HID conversion kit, but a proper HID retrofit would be my preferred end goal.
So what happens when the LED goes out on the morimoto projector? Do you have to buy a new projector? Do you have to take the whole headlight assembly apart again to swap it out?
Over hids on my Audi b8. Need leds . not knocking hids but picked up a 2019 Honda with factory led and in laws a 2021 Toyota Corolla with led headlights and man I’m jealous
Here is the direct link to one of the popular housings we recommend for you. Make sure your wiring is H4, if not we do have adapters to make things work for your application. www.theretrofitsource.com/trs-morimoto-sealed4-4x6-led-housing?quantity=1
TheRetrofitSource Inc hey I have a 2017 Dodge Challenger with halogen projector Housings I wanna get your universal projectors do you know anyone that can retro fit them into my challenger in Arizona?
Good seeing content from you folks. I upgraded my 2011 Escape a while back with your help, and now looking to upgrade my girlfriends 2016 dodge truck. I was holding out for LEP, but it’s not quite there yet. LED seems to fall just short of HID, so I’m on the fence.
Evoxr 2 for long distance and mini d2s projectors is more known for width more than distance but now they said that the new generation of mini d2s 5.0 is for both width and distance, im not sure it is providing a long distance like evorx2 anyway they are the best ever..thanks
It really would depend on what will fit and what type of performance you're looking out of your headlights. If you have the room in the headlight, the MLED 2.0 would be an amazing option. But if you're limited on space, the Mini H1 would be the move. www.theretrofitsource.com/projector-kits/hid-led-projectors
Can you guys please tell me if these bulbs degrade in quality over time?Been using G5R+Hylux 35w+Philips XV Gen2 D2S for more than couple of years now but I somewhat doubt whether they deliver the same output as when they were new. Thanks
Yes, it is natural for HID bulbs and ballast to degrade over time. It might be time to replace either soon. If you need help shoot us an email at support@theretrofitsource.com.
@@RetrofitSource Hey, thanks for replying back. Would you please tell me in how many years do they normally lose their brightness? Mine is a little over two years but has already lost over 40% of brightness which is highly disappointing given the cost and brand! In my case, do you think changing the ballast to 45w or 55w from the current 35w can do any wonders? Thank you so much!
Hey guys, I have a volkswagon 3bg with a H7 projector and I want a bi LED projector. Whats the best projector. I want a good low beam but a very good highbeam. Should I buy a morimoto biLED projector with 3.0 in
I would recommend upgrading to a better bulb! Something like the Osram Night breaker laser! www.theretrofitsource.com/d2s-osram-xenarc-66240-nightbreaker-laser-B-66240XNL
Is it possible to retrofit newer style projector (with laser and that sexy sexy blue line) on a headlight that usually comes with a older style hella bracket, my car is a 2003. W211 e-class that has pretty badly burned orginal bi xenon projectors, and I'm itching to retrofit laser projectors, can you please advise? Excellent review btw 😄😄
Possible to buy the coated 8.0 lenses for the 7.0? Kinda seems like it, but worth an ask. I still want to buy etched lenses anyway. Took me a month of Sundays (literally) to tuck my 7.0's into Spyder buckets, but I did it. Very happy, but would swap that coated lens in a heartbeat. Even without the better cutoff line. Heck...can I order the gate for the better cutoff line?
Unfortunately, we do not sell just the lens. I am sorry about that, and I wish there was something I could do about that! Might be time to just do the upgrade!👍
ABSOLUTELY! We have universal retrofit kits for you to mount and install into your OEM or aftermarket housings. Here is the link for all of the kits available for you. If you have any questions, let us know and we will gladly assist you further. www.theretrofitsource.com/projector-kits/retrofit-kits-universal
I have a projector headlight with halogens (HB3/9005). Should I change my projectors if I change to HIDs or can I just buy aftermarket HIDs (HB3/9005 bulbs) and just directly replace the halogens? What is the advantage of retrofitting to D2S projectors?
The projector that came with your halogens is going to be a halogen-specific projector, therefore HIDs will not be the best option. Putting HIDs into a halogen projector can cause bowls to burn, making the whole headlight defective. You would need to upgrade to a bi-xenon (HID) projector to use the aftermarket HID bulbs.
That is correct, if any failures do occur typically you have to replace the entire LED projector instead of just HID components like you would if an HID projector failed.
I'm new to projector retrofitting so bare with me -- but instead of doing one projector in the low beam spot & one in the high beam, can I make one projector do both? EDIT: Looks like the MLED 2.0 accomplishes that with the low & high beam input for the ballast, correct? Does it require any additional splitters or other wiring modifications?
Depends on if you want to upgrade the projector, the bulbs, or the entire headlight all together! Reach out to us and we can help you find the best fit. support@theretrofitsource.com or 404-220-7940
What would be the difference between the MLED 2.0 and Mini D2S 5.0 range wise? Would the MLED 2.0 project as far as the Mini D2S 5.0? Would the MLED 2.0 be the better choice? Also what would be better for wet/snow driving? I'm trying to decide between these 2.
Tyler, both those options are going to provide a fantastic upgrade overall, and it just depends on what you are looking for! The M-LED 2.0 will provide a wider and overall better beam pattern, and will produce a ton of light output! The Mini D2S will provide a longer throw, so you will be able to see a little further down the road with those. It is dependent on what would work best for you in your specific area, and of course, your personal preference! I will say that the MLEDs are a little easier to install!
How difficult it be to replace a projector housing for a bi led housing in a aftermarket head light? I have a 2008 silverado. I think it has recon projector head lights.
I have a 2018 ford escape titanium and want to upgrade my projectors what one is compatible for my car i have the hid projectors with leds but am not that satisfied with the output
I was looking to purchase the UPS POWER BI-LED + Laser projector but no longer see it for sale on your website and FB page which is a broken link. I emailed you a couple days ago how to obtain it as well if you are able to custom retrofitted for me but never got a reply.
This video is a few years old, but we do believe it was the standard 35W that was used. Not every application can use the 50W since it essentially overpowers the bulbs to create more light... which also generates more heat. Not ideal for small applications.
They will both have a fan that you will have to install inside the headlight housing, this will be totally fine as they are designed to funciton inside those headlight housings! You will have nothing to worry about as far as heat goes, that is why they have those fans! Let us know if you need anything else or have any other questions, have a great day!
MORIMOTO MLED 2.0 ( LOW BEAM 1850 MAX LUX ) are you sure about this numbers ! because I have HID Projector (HELLA 5 F1 ) with 55w Ballast and Osram CBB I got 1200 LUX.
It totally can, with any retrofit, if there is a will there is a way! Retrofits are a custom install, so they can be made to work with almost anything provided the actual headlight itself is big enough!
Great video! I have a question, can you add some photos/video from above demonstrating the how far down the road the light actually gets? I would like to upgrade to LED's and get more light. My concern is losing visible distance.
Although the bulb doesn't determine the wattage, the ballast does, the bulb and ballast that was used in that video would have been a 35W setup, as the 50W ballasts void the warranty on the projectors. If you have any other questions, shoot us an email and we will be happy to help! Support@TheRetroitSource.com
Would it be possible to change my OEM D1S projector for a set of these Morimoto D2S 5.0 projectors? The 45 degree slope that it outputs looks way better than the almost 90 degree slope of my OEM D1S projectors.
It looks like your bench setup is cutting off the foreground because you place the light too far back from the edge of the bench. You can see a lot of light hitting the bench top which prevents me from seeing what the foreground would really look like on a vehicle. The foreground is important, especially on a motorcycle - in the future could you reposition the lights to the very edge of the bench?
Is it posible to put the morimoto 2stroke 2.0 h1led into the morimoto h1 mini 8.0 projector? I need a 2.5" bi led projector for my 67 beetle i cant use hid due to the heat... keep me up!
It will be a tight fit, but you should be able to do that in your vehicle with the 2Stroke 2.0s! If you need any help with that at all, shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
Hi guys :) With the UPS Power + Laser, since it doesn't have a threaded shaft, are there any bolt-and-nut kind of kit to install it, or is it a complete 'you figure it out' kinda thing? Its for the main large reflector of an 06 CRV build, so space isn't an issue. Assume that $ is not an issue either. Thanks
@@RetrofitSource Hi again :) Aside from a full complete kit, are there individual parts that can be used? Or is it like a 'fabricating metal parts' thing? I AM going to get them in the car, just doing my homework, if you know what i mean. :)
The HIDs will reach a little further, but the LEDs will have wider and better distributed spread of light! Let us know if you have any other questions, we are here to help!
@@RetrofitSource thanks for the knowledge.yea i think most of the people when driving at night drives pretty fast as there will less vehicles on the road.so seeing far ahead as we are going so fast is verry important i think.
You would need to go with a full retrofit kit, and you would need to go with the M-LED if you want an LED projector. I have linked that kit for you here: www.theretrofitsource.com/bi-led-morimoto-m-led-headlight-projectors-kit-HS-MLED?quantity=1 If you have any other questions, go ahead and shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
Hello! I can install projectors type MLed in BMW E 46 without showing light code, or what recommendation can they make, which is the appropriate size and type . Thak you.
It's a BMW. Almost anything you do to that car (I had an E38 and now I have an F01) needs to be coded. I'm upgrading my headlights in my F01 to a G5-BRT and I'll lose AFS...so it's going to have to be coded.
@@RetrofitSource I have the OEM HID setup. But it is starting to get dimmer now even after changing ta new ballasts and bulbs. So now i'm thinking of upgrading the projectors. Which one do you think is compatible with my headlights?
If you are looking to retrofit both the low and high beam applications, I would recommend going with M-LED 2.0 for the low beam and the high beam! I have linked that kit for you below, shoot us an email if you have any other questions! Have a great day! Support@TheRetrofitSource.com
@@RetrofitSource that's great. I am considering putting a 60mm led projector into my 2002 A3, in place of the pathetic halogen unit. Already have second set of OEM headlights from an S3 with HID. Additionally, I have a 1998 Honda S-MX, that I am considering Hella's 90mm Gen 1 BiLed. I won't use a threaded connection, rather make a custom carrier, an add other features. Is this the same as the UPS? ￡381.10 36%OFF | SANVI Car Bi LED&laser Projector Lens headlight 35w 6000K hi-low beam Auto LED Projector Headlight Car Motorcycle Light Ppgrade a.aliexpress.com/_BOxpGH
Right on, that would be a fantastic option to upgrade that light output! If you would like to get some products on order or have any other questions, shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
So I have the mini h1 7.0 and I never did like the steep cut off so would the new 8.0 cut off shield work in my 7.0 and do you guys sell it separately?
@@LamborghiniReven1000 is the 8.0 a big enough difference to justify replacing the 7.0? Is it brighter or bigger/better hotspot? I definitely like the cutoff line / slope angle but not sure if its enough to justify replacing my 7.0 for that reason alone. Also does it have more blue along the cutoff line?
@@sydneyann20101 The output is slightly warmer in color temp due to the AR Coating on the lenses. I think I received a funky unit, one of my cutoffs is not perfect / doesn't match the other side. Also received a dim bulb out of the box. Going to hit up their support and try to get the problems solved. Overall It is an upgrade, but if you're happy with the 7.0 I'd just leave it unless you ran into problems.
So how can i use the MLED 2.0 since it has 2 wires for low and high , but my car headlight harness only has 1 connector that is a HID system that is low and high beam?
I wish I could have someone from retrofit answer my question about 2012 Toyota Camry v6 xle led bulb what is the best bulb, and the best hid kit for the same car and for 04 maxima ?
I wish we could do that, but we are not able to recommend LED or HID for street use. If you would like to look into some of the off-road use only options, we would be happy to help if you shoot us an email! Support@TheRetrofitSource.com
@@RetrofitSource I tried emailing you guys but the guy assigned to my email never replied and closed the case. It’s frustrating cause I was planning on purchasing from you guys but that doesn’t help at all
Retrofit, by definition, means adding a component or accessory to something that did not have it when manufactured. In this case, it's retrofitting bi-LED or bi-xenon projectors for a much better experience when driving at night!
Man... I'd love the Morimoto MLED 2.0 in my headlight but I have a 2019 Toyota 4Runner. Darn side projectors... I'm shamefully running factory projectors with HID's as the original halogen bulbs are dimmer than a candle. PLEASE HELP ME lol
Hey there, not sure if I have heard of any issues with running projector retrofits in that side projector, but you should be good to go! If you are worried about fitting those in your headlight housing, you could go with the Mini H1 8.0, as that will be a fair amount smaller.
Looking at retrofitting a 2009 G6 with a quad-projector for an off-road project of mine. Space is tight as I might have to cut the back of the frame. Anyone have experience with this?
So been waiting for RHD M LED 2.0 for Australia to put in my 07 GU patrol but my only concern is replacing the LED as this car had been all over Australia on ruff dirt tracks and blows a light every time on a 5000-10000km trip as I always have the lights on especially towing. I put LED H4 in it and still blows a led on I trip, and to replace a M LED isn't something that you can do on the road, but I'd so like the works, demon eyes, Halo's, switch backs, the etched Lens that said Nissan and instead of the M on the ground I want it to say patrol, oh the sky's the limit. How much can the M LED take in ruff dirt roads?
So long as everything is sealed up and installed properly you shouldn't have any issues with them blowing out on you. If you need help deciding what products to go with email us at support@theretrofitsource.com and one of our service reps will assist you.
i have a 2012 cadillac srx and the low beam are awful, i have tried led, halogens and h.i.d. do you know anyone in loudon new Hampshire that can do this type of work
Not sure if you have checked out the "Partners" page on the website, but that will have all of our registered dealers and vendors! Link: www.theretrofitsource.com/partners
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
My first retrofit was in 2010. The retrofit opporunities have come a long way since then.
A SUPER long way!
That laser high beam is literally over 9000! If you guys ever make a 2.5" MLED projector with the same bolt pattern as the Mini H1, I may have to get myself another upgrade.
The issue is size I believe, but we will keep you in the loop if that is ever coming!
I’ve been following y’all since I first started looking at doing a BHLM on TacomaWorld a decade ago. Thinking my Christmas gift to myself this year will finally be an HID upgrade. This is the absolute best projector video I have ever seen. Thank you!
If you need any help at all please reach out to us!
404-220-7940
Support@TheRetrofitSource.com
Highschool and college i did retrofits using the acme's never had issues with them. Other than having to adjust the bulbs occasionally to improve the hotspots. Now i'm grown and i'm ready for some morimotos lol.
just got around to watching this, ordered a set of Mini D2S's for my E38, can't wait to get this done :)
They will look so good in that vehicle, a huge upgrade for light output and safety!
A Mini M-LED would be perfect also 👌🏻
Kind of a Mini H1, with LEDs 🤩
That's a good idea!
Not sure if this may help someone, but the Morimoto Mini HB also works as a drl in my application. Used on a 12 Civic Si, with a pulsed 9.6v circuit and it lights up not at full brightness but bright enough and does not pulse. No capacitors, resisters, or relay harnesses were used.
That is great to hear, thanks for the information! Hard to find options that will work with voltage drop or PWM drop DRLs!
Ahhh, I should've known y'all were cooking up something good with all this calm, glad to finally see a break-down on all these projectors!
Honestly though, the 6000k color specs of the MLed had me on the sidelines of whether I wanted to use it or not, but after seeing that beam pattern..... I'm sold. I think I'll be using it in my work van along with a DD SS3 fog light set.
Appreciate the work guys, keep it up!
Cant beat that beam pattern, that is what we love about those projectors 💯
Yayyyyyyyyyyyyyyyyyyy for the RHD MLED 2.0!!! Thank you, Matt & TRS!
Thats what we are here for! 😄🙌🙌
Hellz ya great direction! Love that wall comparison
Thanks Cuda!
Doing my first retrofit I’m sooooo excited!
Good luck!!!!!
how did it go?
@@aidendickinson still ordering parts
@@aidendickinson well I went with aftermarket lights because I liked the dark housing which was a draw back because I kinda damaged the headlight housing taking them apart out of the oven so when I went to put them back together at first they did not want to seal up very well I had to wrap the lens and housing with tape and let the glue dry on the ends what a pain,
@@aidendickinson next time I’ll use the OEM housing and lens the plastic looks a lot thicker and more durable
I love the Morimoto Mini HB. but what are the odds a Morimoto Mini LB being in the works? I'd love a dedicated lowbeam led system that compact
It's possible but nothing we've seen yet regarding that!
Challenge accepted, the morimoto micro d2s projector. BOOM.
😈😈😈
Lasers by far, are the way to go for a spotlight
Yes, if that's what you're looking for.
well done, thungs up for great review !!! many thanks and keep it up :D
Thanks for watching!
This is very interesting. I wonder how hard it'd be to replace my 2nd gen mazda 5's low beam halogen projector with a bi-xenon HID. I just put in a HID conversion kit, but a proper HID retrofit would be my preferred end goal.
You should join our Facebook group, you'll get some great tips/tricks!
facebook.com/groups/HeadlightJunkies/
My dad buys all his parts from you!❤️👍😍
We appreciate the support!
O yeah...Good news. M LED 2.0 for RHD car. I can't wait longer to get myself a pair
When that is availabe, we will let you know! We only have the M-LED 1.0 with the RHD model as of right now, but we will keep you posted!
So what happens when the LED goes out on the morimoto projector? Do you have to buy a new projector? Do you have to take the whole headlight assembly apart again to swap it out?
If you have a bi-LED projector, you will have to replace the whole unit.
Hi Matt, what power supply are you using for your tests? Thanks!
We have a testing table built specifically for this use. You can also use an Xbox power supply.
Over hids on my Audi b8. Need leds . not knocking hids but picked up a 2019 Honda with factory led and in laws a 2021 Toyota Corolla with led headlights and man I’m jealous
Shoot us an email with the year make and model of that vehicle, and we will see what we can do for you! Have a good one my man!
Great video Matt 👌
Thanks for the support!🙏🙌
What’s best 4x6 projector and housing need to do this for my semi truck thanks !?!?!
Here is the direct link to one of the popular housings we recommend for you.
Make sure your wiring is H4, if not we do have adapters to make things work for your application.
www.theretrofitsource.com/trs-morimoto-sealed4-4x6-led-housing?quantity=1
Han nailed it! These are highly recommended!
Very imformative. Like the presentation.
Glad you liked it!
Hi lens 2.0 with the metal shaft!!!!
Now you are set 😉😂
TheRetrofitSource Inc hey I have a 2017 Dodge Challenger with halogen projector Housings I wanna get your universal projectors do you know anyone that can retro fit them into my challenger in Arizona?
Good seeing content from you folks.
I upgraded my 2011 Escape a while back with your help, and now looking to upgrade my girlfriends 2016 dodge truck.
I was holding out for LEP, but it’s not quite there yet.
LED seems to fall just short of HID, so I’m on the fence.
All depends on the application!
What did you do to your Escalade?
Evoxr 2 for long distance and mini d2s projectors is more known for width more than distance but now they said that the new generation of mini d2s 5.0 is for both width and distance, im not sure it is providing a long distance like evorx2 anyway they are the best ever..thanks
Glad like those projectors, thanks for the watch!
I have a Corolla 2006 Which one would you recommend
It really would depend on what will fit and what type of performance you're looking out of your headlights. If you have the room in the headlight, the MLED 2.0 would be an amazing option. But if you're limited on space, the Mini H1 would be the move.
www.theretrofitsource.com/projector-kits/hid-led-projectors
Can you guys please tell me if these bulbs degrade in quality over time?Been using G5R+Hylux 35w+Philips XV Gen2 D2S for more than couple of years now but I somewhat doubt whether they deliver the same output as when they were new. Thanks
Yes, it is natural for HID bulbs and ballast to degrade over time. It might be time to replace either soon. If you need help shoot us an email at support@theretrofitsource.com.
@@RetrofitSource Hey, thanks for replying back. Would you please tell me in how many years do they normally lose their brightness? Mine is a little over two years but has already lost over 40% of brightness which is highly disappointing given the cost and brand! In my case, do you think changing the ballast to 45w or 55w from the current 35w can do any wonders? Thank you so much!
Now the market popular high power double lamp cup LED laser lens, can be promoted in advance
Hey guys, I have a volkswagon 3bg with a H7 projector and I want a bi LED projector. Whats the best projector. I want a good low beam but a very good highbeam. Should I buy a morimoto biLED projector with 3.0 in
Check out our website and give us a call so we can help you!
Hey what do u recommend on Evo ix projector as h9 d2s has really weak light ! Thanks ,as I keep same projector and what replace led with?
I would recommend upgrading to a better bulb! Something like the Osram Night breaker laser!
www.theretrofitsource.com/d2s-osram-xenarc-66240-nightbreaker-laser-B-66240XNL
@@RetrofitSource so ballast doesn't get weaker?! Incase it does it dies ?! Thanks
Is it possible to retrofit newer style projector (with laser and that sexy sexy blue line) on a headlight that usually comes with a older style hella bracket, my car is a 2003. W211 e-class that has pretty badly burned orginal bi xenon projectors, and I'm itching to retrofit laser projectors, can you please advise? Excellent review btw 😄😄
Yes, it is possible! Shoot us an email, we can help you find a retrofitter - support@theretrofitsource.com
When will hi lens 2.0 be available?
Not exactly sure, but should be soon!🙌
Possible to buy the coated 8.0 lenses for the 7.0? Kinda seems like it, but worth an ask. I still want to buy etched lenses anyway.
Took me a month of Sundays (literally) to tuck my 7.0's into Spyder buckets, but I did it. Very happy, but would swap that coated lens in a heartbeat. Even without the better cutoff line.
Heck...can I order the gate for the better cutoff line?
Unfortunately, we do not sell just the lens. I am sorry about that, and I wish there was something I could do about that! Might be time to just do the upgrade!👍
Hi is there a video on how to fit these on a headlight...
Yes, we have a few retrofit tutorials on our channel.
th-cam.com/video/Rptiq7h5_uE/w-d-xo.html
Can any of these projectors be retrofitted with any specter d aftermarket headlights
ABSOLUTELY! We have universal retrofit kits for you to mount and install into your OEM or aftermarket housings.
Here is the link for all of the kits available for you. If you have any questions, let us know and we will gladly assist you further.
www.theretrofitsource.com/projector-kits/retrofit-kits-universal
Han nailed it again!
I have a projector headlight with halogens (HB3/9005). Should I change my projectors if I change to HIDs or can I just buy aftermarket HIDs (HB3/9005 bulbs) and just directly replace the halogens? What is the advantage of retrofitting to D2S projectors?
The projector that came with your halogens is going to be a halogen-specific projector, therefore HIDs will not be the best option. Putting HIDs into a halogen projector can cause bowls to burn, making the whole headlight defective. You would need to upgrade to a bi-xenon (HID) projector to use the aftermarket HID bulbs.
Hello, could you please let us know, what is approximate distance between the wall and the projectors? Than you very much in advance! Patrick
We try to keep our testing in every video at the same distance of 25 feet from the wall.
I have bmw e46 oem xenon. With morimoto projector from the video it's better and fits.
Sounds great!
So all of these Bi Led projectors have the bulbs integrated? So what happens when the bulb fails? You have to take out the projector?
That is correct, if any failures do occur typically you have to replace the entire LED projector instead of just HID components like you would if an HID projector failed.
I'm new to projector retrofitting so bare with me -- but instead of doing one projector in the low beam spot & one in the high beam, can I make one projector do both?
EDIT: Looks like the MLED 2.0 accomplishes that with the low & high beam input for the ballast, correct? Does it require any additional splitters or other wiring modifications?
You'll need a splitter off the high beam to trigger the high beam on the MLED 2.0. Our Bi-Xenon projectors work the same way!
Does the m-led 2.0 have the same mounting location of the fx-r 3.0?
Yes they do.
Are you able put led in hid projectors
Yes, they actually work best in projectors.
Question, I need some regular halogen bulbs but Xenon Krypton gas bulbs for my 08 impala , can you send me a link
Shoot us an email and one of our reps will be able to assist you.
support@theretrofitsource.com
Just for a better comparison of the light Output, what was the distance to the wall ?
25ft.
Should I go with Mled 2.0 or D2S XB55 5800K setup?
So what did you do?
5.0 for sure!
What would you suggest for a Nissan 300zx Z32. Low beams projectors are so bad it's not safe to drive at night.
Depends on if you want to upgrade the projector, the bulbs, or the entire headlight all together! Reach out to us and we can help you find the best fit. support@theretrofitsource.com or 404-220-7940
@@RetrofitSource The low beam projector.
What would be the difference between the MLED 2.0 and Mini D2S 5.0 range wise? Would the MLED 2.0 project as far as the Mini D2S 5.0? Would the MLED 2.0 be the better choice? Also what would be better for wet/snow driving? I'm trying to decide between these 2.
Tyler, both those options are going to provide a fantastic upgrade overall, and it just depends on what you are looking for! The M-LED 2.0 will provide a wider and overall better beam pattern, and will produce a ton of light output! The Mini D2S will provide a longer throw, so you will be able to see a little further down the road with those. It is dependent on what would work best for you in your specific area, and of course, your personal preference! I will say that the MLEDs are a little easier to install!
Do all of these require you to take your housings apart and glue them back together?
Depends on the headlight, but as a general rule of thumb, yes.
Hello! What do you suggest for old model car such as Toyota camry 2004 which is best HID projector or BI LED projector?
I would say an HID set up would be much easier to make it all work!
Would the MLED 2.0 fit a first gen tundra headlight?
Yepp, should be plenty of room for the MLED!
How difficult it be to replace a projector housing for a bi led housing in a aftermarket head light? I have a 2008 silverado. I think it has recon projector head lights.
All depends on how it's mounted, it could be a direct swap, or it could be a ton of custom work!
WAIT!!! FX-R ain't the top of the line anymore?....I did a retro back in 13' with a set of those...thoses are like my holy grail
Unfortunately not, better projectors have came about since then. Maybe time for an upgrade? 😉
I have a 2018 ford escape titanium and want to upgrade my projectors what one is compatible for my car i have the hid projectors with leds but am not that satisfied with the output
Give us a shout, we can help! support@theretrofitsource.com
I have quad MLed 2.0 fitted in my 04 wrx housings. Best upgrade ever. Makes subarus expensive limited led projectors a bad joke.
So glad you like those things, they are pretty insane! Make sure to send us some pictures of your build!🤘
@@RetrofitSource I put up a review on your site, where can I send the rest of the photos?
If you want to send those over to us via email, that would be great! Support@TheRetrofitSource.com
I was looking to purchase the UPS POWER BI-LED + Laser projector but no longer see it for sale on your website and FB page which is a broken link. I emailed you a couple days ago how to obtain it as well if you are able to custom retrofitted for me but never got a reply.
We no longer carry that projector, and unfortunately we don't do retrofits at our location. Only offer the retrofit parts!
@RetrofitSource Awww...OK. Thank-you so much for the very quick reply and update.🙏👍
What could I put in a peterbilt 389. Tractor trailer
I would recommend some MLED 2.0 projectors!
www.theretrofitsource.com/bi-led-morimoto-m-led-2-headlight-projectors-P-M-LED2
Does the solenoid go on too or the bottom?
Which projector are you referring to? Reach out to us and we can help - 404-220-7940
Was this done with 35watt or 55watt?
This video is a few years old, but we do believe it was the standard 35W that was used. Not every application can use the 50W since it essentially overpowers the bulbs to create more light... which also generates more heat. Not ideal for small applications.
Ram Ram brother, biggest day for India. eagerly waiting for your videos. Thanks
Glad you liked the video! Thanks for watching!
Does the MLED 2.0 come with LEDs or would those be a separate purchase?
The M-LED 2.0 is a fully integrated LED projector, those LEDs are built right in! Let us know if you have any other questions, we are here to help!
Does the profile bi led or the morimoto 2.0 bi led fan have to be enclosed in the light housing or can the be left out behind the headlights?
They will both have a fan that you will have to install inside the headlight housing, this will be totally fine as they are designed to funciton inside those headlight housings! You will have nothing to worry about as far as heat goes, that is why they have those fans! Let us know if you need anything else or have any other questions, have a great day!
MORIMOTO MLED 2.0 ( LOW BEAM 1850 MAX LUX ) are you sure about this numbers ! because I have HID Projector (HELLA 5 F1 ) with 55w Ballast and Osram CBB I got 1200 LUX.
You got it, this is the number that we got testing in house! They are insane!🤯🔥
Can the MLED 2.0 replace the 2013 Hyundai Sonata factor projector?
It totally can, with any retrofit, if there is a will there is a way! Retrofits are a custom install, so they can be made to work with almost anything provided the actual headlight itself is big enough!
can you recommend a h4 projector for budget price
None of the projectors we offer are H4, sorry!
We do have plenty of HID projector options though!
Great video! I have a question, can you add some photos/video from above demonstrating the how far down the road the light actually gets? I would like to upgrade to LED's and get more light. My concern is losing visible distance.
Check out the group Headlight Junkies on Facebook, this is a great place to check output shots that other users have posted!
Any of these work if I want to retrofit my 2017 Ducati Panigale 959?
Yes, they will!
bulb used in morimoto d2s 5.0 is 35 or 55w?
Although the bulb doesn't determine the wattage, the ballast does, the bulb and ballast that was used in that video would have been a 35W setup, as the 50W ballasts void the warranty on the projectors. If you have any other questions, shoot us an email and we will be happy to help! Support@TheRetroitSource.com
I have a H7 LED to put in a projector, does it have to be in the 3 & 9 o'clock position even in a projector housing??
Yes it does.
Would it be possible to change my OEM D1S projector for a set of these Morimoto D2S 5.0 projectors? The 45 degree slope that it outputs looks way better than the almost 90 degree slope of my OEM D1S projectors.
...would there be any bulb errors if I were to use a D2S bulb vs the original OEM D1S bulb? What's the input voltage for a D2S vs a D1S bulb?
It would take some work but it can be done!
When will the RHD version for the Mini H1 8.0 be available please ?
Not sure if that will be a thing😞 Still have the RHD 7.0 available! www.theretrofitsource.com/bi-xenon-mini-h1-7-0-projectors-P-M-H1?quantity=1
TheRetrofitSource Inc ... you’re kidding right 😟 ... I was looking forward to the RHD version
I wish I was, but this is straight from our product development manager😔 Sorry Parvin!
It looks like your bench setup is cutting off the foreground because you place the light too far back from the edge of the bench. You can see a lot of light hitting the bench top which prevents me from seeing what the foreground would really look like on a vehicle. The foreground is important, especially on a motorcycle - in the future could you reposition the lights to the very edge of the bench?
Thank you for your input!
Is it posible to put the morimoto 2stroke 2.0 h1led into the morimoto h1 mini 8.0 projector? I need a 2.5" bi led projector for my 67 beetle i cant use hid due to the heat... keep me up!
It will be a tight fit, but you should be able to do that in your vehicle with the 2Stroke 2.0s! If you need any help with that at all, shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
How's compatibility of MLED with H1?
I'm not sure what you mean by this.
Hi guys :) With the UPS Power + Laser, since it doesn't have a threaded shaft, are there any bolt-and-nut kind of kit to install it, or is it a complete 'you figure it out' kinda thing? Its for the main large reflector of an 06 CRV build, so space isn't an issue. Assume that $ is not an issue either. Thanks
It is very much a DIY install, no vehicle specific kits that we've seen for them yet!
@@RetrofitSource Hi again :)
Aside from a full complete kit, are there individual parts that can be used? Or is it like a 'fabricating metal parts' thing? I AM going to get them in the car, just doing my homework, if you know what i mean. :)
Which is brighter and far reaching?MLED or HID?
The HIDs will reach a little further, but the LEDs will have wider and better distributed spread of light! Let us know if you have any other questions, we are here to help!
@@RetrofitSource thanks for the knowledge.yea i think most of the people when driving at night drives pretty fast as there will less vehicles on the road.so seeing far ahead as we are going so fast is verry important i think.
Does the MLED 2.0 have startup uhhh...sequence @12:32 ???
This was handheld. Sorry for the confusion!
Hi I looking for a HID (bixenon) design kit for the Dodge Journey 2014 crossroad ? can you advise something... for Europa
Hello, if you still need assistance shoot us an email at support@theretrofitsource.com & one of our customer service reps will assist you.
Hiii. Do you have new profile hi lens 2.0 in stock?
I am sorry to say that we do not have that in stock, and I am not susre when we will be getting those in stock. Sorry about that!
I have a 2001 ford lighting what projectors would you recommend for that application
Tons of room in those headlights! I would recommend the D2S 5.0!
@@RetrofitSource do you think it will be a simple swapp or will there be alot of cutting?
Fairly simple, will need to be recessed some or have a larger shroud to cover up the internal bits of the projector.
@@RetrofitSource when does your black friday sale begin this year?
So, if I were to retrofit a better projector on a W211 Mercedes to LED.. What would I need?
You would need to go with a full retrofit kit, and you would need to go with the M-LED if you want an LED projector. I have linked that kit for you here: www.theretrofitsource.com/bi-led-morimoto-m-led-headlight-projectors-kit-HS-MLED?quantity=1
If you have any other questions, go ahead and shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
What is ar coated lens means?
Anti-Reflective!
When’s that profile hi lens dropping?
Not absolutely sure on a date yet, but should be dropping soon!🙌🙌
Hello! I can install projectors type MLed in BMW E 46 without showing light code, or what recommendation can they make, which is the appropriate size and type . Thak you.
It's a BMW. Almost anything you do to that car (I had an E38 and now I have an F01) needs to be coded. I'm upgrading my headlights in my F01 to a G5-BRT and I'll lose AFS...so it's going to have to be coded.
Hello, if you still need help email us at support@theretrofitsource.com and one of our service reps will be able to help you.
Hey man, which one do you think is the most suitable upgrade for my 2006 Lexus RX330?
Do you have the OEM Halogen bulbs or the OEM HID setup? Let us know that and we will be able to get you a recommendation!
@@RetrofitSource I have the OEM HID setup. But it is starting to get dimmer now even after changing ta new ballasts and bulbs. So now i'm thinking of upgrading the projectors. Which one do you think is compatible with my headlights?
@@RetrofitSource oh and i also like to know, if i can retrofit one of those bi-led with hi low beam inside the hi beam section of my headlights?
If you are looking to retrofit both the low and high beam applications, I would recommend going with M-LED 2.0 for the low beam and the high beam! I have linked that kit for you below, shoot us an email if you have any other questions! Have a great day! Support@TheRetrofitSource.com
Have you reviewed any of the Hella after market Led Projector modules, as these ate sae, ece and dot appoved?
We havent had those in for testing, we will have to look into those and see if we can get a video going for you!
@@RetrofitSource that's great. I am considering putting a 60mm led projector into my 2002 A3, in place of the pathetic halogen unit. Already have second set of OEM headlights from an S3 with HID. Additionally, I have a 1998 Honda S-MX, that I am considering Hella's 90mm Gen 1 BiLed. I won't use a threaded connection, rather make a custom carrier, an add other features.
Is this the same as the UPS?
￡381.10 36%OFF | SANVI Car Bi LED&laser Projector Lens headlight 35w 6000K hi-low beam Auto LED Projector Headlight Car Motorcycle Light Ppgrade
a.aliexpress.com/_BOxpGH
Right on, that would be a fantastic option to upgrade that light output! If you would like to get some products on order or have any other questions, shoot us an email and we will get you taken care of! Support@TheRetrofitSource.com
So I have the mini h1 7.0 and I never did like the steep cut off so would the new 8.0 cut off shield work in my 7.0 and do you guys sell it separately?
While it would probably work, it is not sold separately. I just upgraded to the 8.0 from the 7.0.
@@LamborghiniReven1000 is the 8.0 a big enough difference to justify replacing the 7.0? Is it brighter or bigger/better hotspot? I definitely like the cutoff line / slope angle but not sure if its enough to justify replacing my 7.0 for that reason alone. Also does it have more blue along the cutoff line?
@@sydneyann20101 The output is slightly warmer in color temp due to the AR Coating on the lenses. I think I received a funky unit, one of my cutoffs is not perfect / doesn't match the other side. Also received a dim bulb out of the box. Going to hit up their support and try to get the problems solved. Overall It is an upgrade, but if you're happy with the 7.0 I'd just leave it unless you ran into problems.
@@LamborghiniReven1000 appreciate the quick response and thanks for the advice
Not sold separately, sorry!
So how can i use the MLED 2.0 since it has 2 wires for low and high , but my car headlight harness only has 1 connector that is a HID system that is low and high beam?
Shoot us an email if you still need assistance. support@theretrofitsource.com
@@RetrofitSource will do
When mled 2.0 rhd is launching?
We hope to have that very soon, stay tuned for that!
What's the Kelvin temp on the Mled 2.0?
The LED chips used are 6300k!
👍🙂
Hello, Brazil 🇧🇷
Hello 🙌🏼
I wish I could have someone from retrofit answer my question about 2012 Toyota Camry v6 xle led bulb what is the best bulb, and the best hid kit for the same car and for 04 maxima ?
I wish we could do that, but we are not able to recommend LED or HID for street use. If you would like to look into some of the off-road use only options, we would be happy to help if you shoot us an email! Support@TheRetrofitSource.com
@@RetrofitSource I tried emailing you guys but the guy assigned to my email never replied and closed the case. It’s frustrating cause I was planning on purchasing from you guys but that doesn’t help at all
I wish the Hi-Lens 2.0 offered a wider beam pattern, more similar to the Hi-Lens 1.0
Thanks for the comment.
does "retro fit" mean installing something that gets rid of that black line crap that I have on my 2016 Toyota Camry?
Retrofit, by definition, means adding a component or accessory to something that did not have it when manufactured. In this case, it's retrofitting bi-LED or bi-xenon projectors for a much better experience when driving at night!
they need to make a Mini D2S 5.0 that bolts up to Hella E55 housing to replace the EvoX-R
Hopefully we will be able to do something like that down the road, we will keep you posted! Have a nice day!
Man... I'd love the Morimoto MLED 2.0 in my headlight but I have a 2019 Toyota 4Runner. Darn side projectors...
I'm shamefully running factory projectors with HID's as the original halogen bulbs are dimmer than a candle.
PLEASE HELP ME lol
Hey there, not sure if I have heard of any issues with running projector retrofits in that side projector, but you should be good to go! If you are worried about fitting those in your headlight housing, you could go with the Mini H1 8.0, as that will be a fair amount smaller.
Lexus rx350 projectors with a clear lens will fit with some mods to clear the solenoid and bolt right in. With your choice of d2s bulb to go with.
Looking at retrofitting a 2009 G6 with a quad-projector for an off-road project of mine. Space is tight as I might have to cut the back of the frame. Anyone have experience with this?
Not sure exactly what vehicle that is, could you get me the year make and model for that?
So been waiting for RHD M LED 2.0 for Australia to put in my 07 GU patrol but my only concern is replacing the LED as this car had been all over Australia on ruff dirt tracks and blows a light every time on a 5000-10000km trip as I always have the lights on especially towing. I put LED H4 in it and still blows a led on I trip, and to replace a M LED isn't something that you can do on the road, but I'd so like the works, demon eyes, Halo's, switch backs, the etched Lens that said Nissan and instead of the M on the ground I want it to say patrol, oh the sky's the limit. How much can the M LED take in ruff dirt roads?
So long as everything is sealed up and installed properly you shouldn't have any issues with them blowing out on you. If you need help deciding what products to go with email us at support@theretrofitsource.com and one of our service reps will assist you.
i have a 2012 cadillac srx and the low beam are awful, i have tried led, halogens and h.i.d. do you know anyone in loudon new Hampshire that can do this type of work
Not sure if you have checked out the "Partners" page on the website, but that will have all of our registered dealers and vendors! Link: www.theretrofitsource.com/partners