Oh I dunno..in the area where I live they seem to have a rule about running a body shop in your driveway. You know...that whole paint Isocyanate thingy.
I love sharing things I've learned over the years with you guys, taking the mystery out of framework and other aspects of body work is why I do these videos :-)
Having “discovered “ your channel the previous video, I wanted to say you have a excellent way of describing what, why, and how to fix body damage. Other body fix video doesn’t explain in detail like you. I like that. I subscribed to your channel and look forward to your next one
Excellent video showing auto body repair process in thorough detail! I'm pretty sure most commercial auto body repair shops probably wouldn't be half as careful & thorough in the repair process, as the repair process shown in this great video presentation.
I just saw your video for the first time, i have a small dealership and fix and do very similar work, as you show on your yoir vedios. Not as sever as your damages vehicles, for some reason, watching what you do is still very enjoyable, specially when i understand your work and the reasons for what and how you do it. Thanks for the time and the patience you out into your vedios. Great job!
Just binged all your videos, after having followed all your advice regarding spray painting on your driveway, and painting my own 2007 VW Polo, although with a chead LVLP R500 chinese spray gun. Turned out great :). You are a very skilled mechanic, and videographer, so I am really looking forward to the last video in the Mazda series, if you ever got around to finishing it that is :) Thank you for some enjoyable hours of information - very inspirational.
My guy! I just came across your videos & I’m hooked. I watched the first suv video too! I’m awaiting the final video of this repair. Hey post it next week PLEASE! I think I’m going to subscribe and forward your channel! 👌🏾🔥💎👑
cant wait to see how good the color match is, it looks pretty great so far. if you have any tips on color matching please include them in the next vid if possible
This wreck is starting to look like a car again. What a difference to when you first started. It looked way worse at the start than it actually was once you got into it. When you were describing how you were removing the damaged panels, I knew you would be using a spot welder for reassembly. Looking forward to the final video and seeing the car all finished.
Drilling the old panels out was probably my least favorite part of the whole process. But with the old panels out of the way all the new stuff went on and lined up pretty quickly. And it took less than 15 minutes to get everything welded in with the spot welder. Now, if I used the mig welder to get everything welded in, then afterwards I would have to spend at least an hour or more on leveling all of the welds down with a grinder. I had to do none of that when I use the spot welder, it is a big time saver !!!
Hello I've watched a couple videos and 👍 great stuff. Anyways I was wondering if you are in the Puget Sound region of Washington State? - Its the 206 in your channel's name for why Im asking.
Good job.ive done a similar repair on an f150.when I aligned it it took more shimming than I would have liked but drove it for years with no problems and my son's drove it years afterwards.dont know how I would feel about selling it to someone.but if your gonna drive it it's well worth it
This has been my wife's daily for over a year now. No issues at all :) I try to get all of my panels into place as precisely as possible (that's where the use of a laser really shines ) so that there is no need for shimming 😊
Thanks for the informative video. One question I have is how do you ascertain that undamaged strut tower off which you are baselining your vertical alignment has also not moved. What I mean is that both the strut towers for example might have moved down with UNdamaged one moving down 4 mm therefore, how do you confirm that ? How would you baseline ? Thanks again
It takes quite a bit of force to move a strut tower over, therefore I can say with 100% certainty that the strut tower on the undamaged side did not move any at all...
I’m working on a similar 2023 cx5 project , I would love to see how will you clear SRS airbag crash codes, and get the adaptive headlights in working order, because I’m stuck at those two
It would be interesting to download the link to the program that has the measurements of the car's body or where to buy it, or a dedicated video on how to do this process for your followers...
The first set of measurements I found online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
really no need for the laser level but really good to actually show just how much skill and labour is involved for those who winge about an underpaid trade
Oh I know your love of the old... Right now I'm trying to concentrate on personal vehicles or the stuff that makes money, I started out on the five window Chevy not realizing how much time it's going to take to get it done and that rebuild sure isn't going to pay the bills, so far it has been put on a back burner for a while... Hopefully I'll get to it one of these days :-)
Greetings from Poland. In the USA, damaged cars are cheap and we buy them from the East (Poland, Ukraine, Gruza etc) and repair them. Even though we have to pay at least USD 4,000 for cargo, VAT, shipping, etc., after the repair we still earn about 20%. You probably have a larger one, although an hour of work by a bodyworker or painter in Poland is only about -40 USD
Hey I love you job. Unfortunately I had an accident and my car is totalled. It is a 2003 Celica GTS. I am planning to fix it as the insurance covers some costs. It has bend frame rails. Where can I get the schematics for a front end collision ? Do I have to buy it ? I want to give em to my mechanic and possible show him you repair video. I hope he does not get insulted. I might have to buy a laser as I think he does not have. I live in a poor country :(
wow, your work is amazing, thanks for sharing, could you guide me, where to buy parts to replace since I have watched many of your videos and I would like to try doing something like that since I have no experience or knowledge where to buy parts to replace, thank you..😊
А где вы берете краску для машины ? Если заказать по color коду то часто бывает color mismatch с оригинальным цветом, но может есть качественные производители краски (а не дешевые которые я наверно брал), или надо идти в шопы которые смешивают цвета чтобы подобрать нужный оттенок на основе образца от машины ? Спасибо
В моём районе есть пару магазинов которые специализируются только по краски для машин. Один магазин намного дороже другого, в основном продают краску PPG и DuPont... Так что к ним я заглядываю очень редко, другой магазин продает краску Matrix и PerfectCoat. Раньше Matrix был дешевле, сейчас почему-то подорожал, но последних года 3-4 я покупаю эксклюзивно PerfectCoat. Краска китайская, но качественная. Перекрывает цвет очень хорошо почти на первом проходе, второй проход перекрывает все на 100%. Я в основном привожу им какой-то из элементов с битой машины и даю им код краски. По коду подбирается цвет и потом они догоняют этот цвет под цвет одного из элементов где-то на 98%... А там уже переход дорабатывает свое дело
I found the measurements online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
I'm Rebuilding a copart IONIQ 5. Wish I had seen this laser info sooner. I went to fit the hood and found the Right Side of the bumper was down 1/2" Grrrrrrr. Back to square one.
I went over on how I go about that in the first video of this build, if you're interested here's the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
For structural parts either go to the wrecking yard to get used parts, or go to dealer for brand new parts. All of my parts were from a dealer, and they were actually not as much as I thought they would be
Hey there, I was wondering, where do you get the measurements for cars? In your previous (Mazda) videos I’ve seen you have complete measurements of frame rail distance and so on. I’ve looked around and haven’t been able to find any info anywhere. Would you be able to help me with that?
He has access to official OEM repair documentation from his job through Mitchell estimation software. There's plenty of software out there that does the same thing, another one I can think of off the top of my head is ALLDATA. These software programs are not cheap and are intended for repair shops but you can purchase a monthly or yearly license for about $20 a month or $60 a year for ALLDATA DIY edition or $2,748.00 a year for ALLDATA PRO edition. You may get lucky searching the internet but I wouldn't count on it. You can try to friend someone who works in a shop and prints out/screen captures the info you need.
How would I find body dimensions for my 2012 Lexus gx460. I had a minor accident in the rear and the rear door (hatch) closes but doesn’t line up perfect, same with right rear taillights
I always start by googling the chassis dimensions... Sometimes you get lucky and find them online for free... Other times you have to buy them, there are websites that sell dimensions for just about any vehicle
I found the measurements online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
I know it's been a while, and I feel terrible for not posting. I'm currently working on the last video on this Mazda rebuild. It should be out in a few days
Great video. Sorry if I missed it, but what is the name of the tool you used to pull the valley in the door? Not the clamp you first used to pull. It looked like a welder?
It's very interesting, but this vlogger is not going to be around for long. There is too much talk and not enough action. Viewers want to see more work on vehicles. He has tools he made himself, but I don't see a workshop he can work in.
Been here awhile, not planning on leaving anytime soon... I literally explain what it is that I'm doing and why I'm doing it that way as I am doing the work. Not sure how much more action I can cram into a video. The whole point of the channel here is that you don't need a workshop to get stuff done. If I had a nice facility that I worked out of, then lots of viewers may just get an impression that they wouldn't be able to do the same since they are lacking the facility
I don't really have any blueprints, I'm thinking about doing a more detailed video on the frame rack later down the road where I'll go over all of the dimensions. But if you're interested, here is the video of how I built that frame rack: th-cam.com/video/krCki0BT8Fw/w-d-xo.html
No video in 4 months. Hope all is ok with this guy. His channel is pure gold.
Yeah, hope so too.. been waiting for an update
Oh I dunno..in the area where I live they seem to have a rule about running a body shop in your driveway. You know...that whole paint Isocyanate thingy.
Yeah
Waiting too
Man this guy is ingenious, i would love to learn these things since i live to work with my hands.
I love sharing things I've learned over the years with you guys, taking the mystery out of framework and other aspects of body work is why I do these videos :-)
Nice job bro, this is the first time I've seen how it's done, they are very professional. What state do you live in?@@fix206
How can I get those measurements not only from Mazda, I want from BMW x1
How can I get those measurements not only from Mazda, I want from BMW x1
go rent a room in his house and learn, 😁
This is the best repair page I have come across on YT just wow !!
Thank you, I appreciate that!!
you would attempt the repairs you see here? 🤣😆
It's unbelievable how good this guy is.
Thank you! I appreciate that !!!
Having “discovered “ your channel the previous video, I wanted to say you have a excellent way of describing what, why, and how to fix body damage. Other body fix video doesn’t explain in detail like you. I like that. I subscribed to your channel and look forward to your next one
I always try to explain as best as I can so that anyone can follow along and fully understand the process after watching the video...
This is coming out clean and smooth, just like all the projects you work on. Thanks!👍💪✌️
Thank you, I appreciate that !!
Bet your neighbor Gladys loves your landscaping. 😉
Very good explanation. Quite good work. 👍
He sure does 😎
very clever how you read the damage and solve it. perfect job
Thank you !!
Excellent video showing auto body repair process in thorough detail!
I'm pretty sure most commercial auto body repair shops probably wouldn't be half as careful & thorough in the repair process, as the repair process shown in this great video presentation.
what a job!!!! hats off to a full professional!!!!
Thank you very much, I appreciate it !!
Great info 👍 you are the best by far on TH-cam
Thank you very much, I try :-)
Bro, the craftsmanship is next level. Nicely done
Much appreciated !!
I love your type of videos. Very informative and entertaining rather than vlog and entertaining. Keep up good work.
I try to make my videos as informative as possible, I feel like straight to the point with no extra BS is the way to do it ..
Amazing quality work. 🔥🔥🔥
Thanks for watching 😉
Glad I came across your channel, as a Bodytech myself, I respect your work. Bravo!👏 keep the videos coming
Thank you and Welcome aboard!
This is raw God given talent. This guy works like no other TH-camrs his ingenuity is second to none. Great work ❤❤❤❤🎉
Haha... Thank you Thomas, really appreciate that!!
I just saw your video for the first time, i have a small dealership and fix and do very similar work, as you show on your yoir vedios. Not as sever as your damages vehicles, for some reason, watching what you do is still very enjoyable, specially when i understand your work and the reasons for what and how you do it.
Thanks for the time and the patience you out into your vedios. Great job!
I'm glad you find my videos enjoyable! I love showing folks what's possible with some know how ! 👍
Just binged all your videos, after having followed all your advice regarding spray painting on your driveway, and painting my own 2007 VW Polo, although with a chead LVLP R500 chinese spray gun. Turned out great :).
You are a very skilled mechanic, and videographer, so I am really looking forward to the last video in the Mazda series, if you ever got around to finishing it that is :)
Thank you for some enjoyable hours of information - very inspirational.
I appreciate the kind words!!! I'm working on the last Mazda video right now... Should have it out if a few days.
Can't wait. And keep up the good work :)
My guy! I just came across your videos & I’m hooked. I watched the first suv video too! I’m awaiting the final video of this repair. Hey post it next week PLEASE! I think I’m going to subscribe and forward your channel! 👌🏾🔥💎👑
I am working on the next video right now, should be out pretty soon 👍
Very informative video I can't Thankyou enough for putting together this one.
Glad you enjoyed it! Got much more in the works...
cant wait to see how good the color match is, it looks pretty great so far. if you have any tips on color matching please include them in the next vid if possible
Will do! Next vid coming soon
This type of work takes time and patience !
That's correct, but the way I see it, spend extra time, do it right or don't do it at all 😉
Excellent work!!
Thanks a lot!
Top notch. Can we get a video on the pulling tower and the trolly build!!! I want to make one!
Here is the link to my frame rack build: th-cam.com/video/krCki0BT8Fw/w-d-xo.html
This wreck is starting to look like a car again. What a difference to when you first started. It looked way worse at the start than it actually was once you got into it. When you were describing how you were removing the damaged panels, I knew you would be using a spot welder for reassembly. Looking forward to the final video and seeing the car all finished.
Drilling the old panels out was probably my least favorite part of the whole process. But with the old panels out of the way all the new stuff went on and lined up pretty quickly. And it took less than 15 minutes to get everything welded in with the spot welder. Now, if I used the mig welder to get everything welded in, then afterwards I would have to spend at least an hour or more on leveling all of the welds down with a grinder. I had to do none of that when I use the spot welder, it is a big time saver !!!
Never seen your work before. You're doing an awesome job great content and I'd bet monet you're assembling this better than factory....thank you
Keep up the good work sir!! Really enjoy your repairs.
Thanks, will do!
Excellent video! I was wondering where I could find the tape you use for measuring as well as the magnets. Thank you!
The small yellow measuring tape that I'm using can be found here: amzn.to/47fAJcy . And the magnet can be found here: amzn.to/4gkUp2O
@@fix206Thank you!!
Hello I've watched a couple videos and 👍 great stuff. Anyways I was wondering if you are in the Puget Sound region of Washington State? - Its the 206 in your channel's name for why Im asking.
You are correct. I'm about 30 minutes south of Seattle
Fix206 drops a video, I watch, I hit the like button 👍 Fugget about it ! ( In my Italian Mob Boss Impersonation 😎 Voice)
Thanks bro !!
Great Video.
Thanks for the visit !
Good job.ive done a similar repair on an f150.when I aligned it it took more shimming than I would have liked but drove it for years with no problems and my son's drove it years afterwards.dont know how I would feel about selling it to someone.but if your gonna drive it it's well worth it
This has been my wife's daily for over a year now. No issues at all :) I try to get all of my panels into place as precisely as possible (that's where the use of a laser really shines ) so that there is no need for shimming 😊
Another great video to watch, my day is instantly better.
Haha.. Glad to hear that !!😀
Excellent work and very informative content. Please upload regularly
Thank you very much, next video to be posted pretty soon!
First time i ever said this but whens the next video dropping? Im hooked 🩸
I Love The attention to detail I just subscribed!!
Thanks for the sub! And welcome aboard !!
Good evening, can I ask you on which forum you buy the car chassis measurements.
Thanks
I don't buy them, in this video I did show how I get my measurements.
Really educational and informative at all levels, I would definitely use this guys techniques, brilliant
Glad it was helpful!
I love Ooredoo mechanic job thank you🙏
👍👍
Please, brother, I follow you on TH-cam and Instagram. Please help me find a job contract on a . May God bless you.🇺🇸🇲🇦🇺🇸
Or work with you
@@fix206🙏🙏
Thanks for the informative video. One question I have is how do you ascertain that undamaged strut tower off which you are baselining your vertical alignment has also not moved. What I mean is that both the strut towers for example might have moved down with UNdamaged one moving down 4 mm therefore, how do you confirm that ? How would you baseline ? Thanks again
It takes quite a bit of force to move a strut tower over, therefore I can say with 100% certainty that the strut tower on the undamaged side did not move any at all...
Nice informative video. Hope you get to put up more videos
I am working on it !
hats off to your knowledge sir.
Your videos are always so interesting and useful
I always try to pack my videos with as much useful information as possible 😊
This guy is great
Thank you !
Hi, do you know how can i find the measurements for my vehicle online? What are some key words i should try while trying to search for this?
Good question. I hope that someone provide an answer to it
Saw your comment about laser on V-tuned👍, hope I’m not alone🤞
Hopefully my laser measuring technique did not disappoint 😉😎
waiting for the last video, i realiy love your videos man ❤❤😂😂
Working on it right now... Should be out sometime this weekend :)
Its best repair i ever seen🎉i have one question bro,can you show me underhood and side wiev dimendions for accord hybrid 2016.
3 MONTHS AGO??!!!!😢
I hope all is well with you and your fam, Maestro 😮
How to get vehicle measurements data online
Fantastic information thanks for sharing 🎉.
My pleasure!
Where do you get factory frame measurements from?
I'm not sure if you skipped over that part of the video but I did go over it...
@fix206 yes on Micheal..but where to get Micheal free or free drawings?
It's a payed program/service... Not sure where you can get it for free
Which program is that ?
@@abasssorosh7623 micheal....
I’m working on a similar 2023 cx5 project , I would love to see how will you clear SRS airbag crash codes, and get the adaptive headlights in working order, because I’m stuck at those two
You are the BEST !!
I try 😉
@@fix206 You're alive!!!
Where Do You Get The Measurment Sheets??
Love Your Work ❤
I went over where I get my chassis measurements in this video: th-cam.com/video/h1KnIMv08N0/w-d-xo.html
thanks very good video
It would be interesting to download the link to the program that has the measurements of the car's body or where to buy it, or a dedicated video on how to do this process for your followers...
Very nice and full of information. Where did you get the measurement data ?
Thanks
The first set of measurements I found online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
Good job !!
Thank you! Cheers!
really no need for the laser level
but really good to actually show just how much skill and labour is involved for those who winge about an underpaid trade
Use of a laser makes this type of work much easier and precise 👍
Cool stuff!!!😍
Your work is inspirational. Would you know where I can find frame rail and under bonnet factory dimensions for a 08 Nissan 350Z?
Where can I get those measurements for cars online ?
I went over that in detail in one of the earlier videos on this build. Here is the link: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
Looking good. So when do we see the old 5 window Chevy getting worked on? Cuz you know I have a soft spot for the old iron.
Oh I know your love of the old... Right now I'm trying to concentrate on personal vehicles or the stuff that makes money, I started out on the five window Chevy not realizing how much time it's going to take to get it done and that rebuild sure isn't going to pay the bills, so far it has been put on a back burner for a while... Hopefully I'll get to it one of these days :-)
I'm definitely subscribe to your channel 🎉
Thank you Augustine, I promise not to disappoint :-)
Greetings from Poland. In the USA, damaged cars are cheap and we buy them from the East (Poland, Ukraine, Gruza etc) and repair them. Even though we have to pay at least USD 4,000 for cargo, VAT, shipping, etc., after the repair we still earn about 20%. You probably have a larger one, although an hour of work by a bodyworker or painter in Poland is only about -40 USD
👍👍
In Ukraine,cost of job like that is only 10$/hour.
Where did u get those parts to replace all the metal u took off
All of the structural components I bought from Mazda dealership
Where's the final video you left me hangin
Where do you purchase your body panels /parts
Hey I love you job. Unfortunately I had an accident and my car is totalled. It is a 2003 Celica GTS. I am planning to fix it as the insurance covers some costs. It has bend frame rails. Where can I get the schematics for a front end collision ? Do I have to buy it ? I want to give em to my mechanic and possible show him you repair video. I hope he does not get insulted. I might have to buy a laser as I think he does not have. I live in a poor country :(
Where did you get the factory chassis dimensions?
I showed in the video where I got the dimensions...
wow, your work is amazing, thanks for sharing, could you guide me, where to buy parts to replace since I have watched many of your videos and I would like to try doing something like that since I have no experience or knowledge where to buy parts to replace, thank you..😊
Your local dealer will always have access to just about any part that you need..
@fix206
Thanks you 🙏🏽.
Really great work and thanks for sharing the years of experience. Curious if you take on local projects? LMK and I can share details
Thanks Casey! I normally just work on my own projects, and I barely have enough time to work on them...
Totally understand, I’m in the same boat. Would you consider taking a look at my project and sharing initial thoughts? I can email a photo
Pictures only tell you part of the story, but sure I can take a look... drelar543210@gmail.com
А где вы берете краску для машины ? Если заказать по color коду то часто бывает color mismatch с оригинальным цветом, но может есть качественные производители краски (а не дешевые которые я наверно брал), или надо идти в шопы которые смешивают цвета чтобы подобрать нужный оттенок на основе образца от машины ?
Спасибо
В моём районе есть пару магазинов которые специализируются только по краски для машин. Один магазин намного дороже другого, в основном продают краску PPG и DuPont... Так что к ним я заглядываю очень редко, другой магазин продает краску Matrix и PerfectCoat. Раньше Matrix был дешевле, сейчас почему-то подорожал, но последних года 3-4 я покупаю эксклюзивно PerfectCoat. Краска китайская, но качественная. Перекрывает цвет очень хорошо почти на первом проходе, второй проход перекрывает все на 100%. Я в основном привожу им какой-то из элементов с битой машины и даю им код краски. По коду подбирается цвет и потом они догоняют этот цвет под цвет одного из элементов где-то на 98%... А там уже переход дорабатывает свое дело
@@fix206 ясно, спасибо, тогда да, перестану в инете искать, пойду по шопам местным
Где сам находишься?
@@fix206 хьюстон, техас
oh ok... Я в Сиетле, надеюсь скоро переехать во флориду ...
Where can I get panels like the tower assembly
All of the replacement structural parts I got from the dealer.
Could you please tell me where you got the reference sheet for measurements? Trying to do my 2001 Dodge Durango slt 5.9 Thanks
I found the measurements online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
I'm Rebuilding a copart IONIQ 5. Wish I had seen this laser info sooner. I went to fit the hood and found the Right Side of the bumper was down 1/2" Grrrrrrr.
Back to square one.
Hello. I would love if you could share with us on what webpage you got the vehicle dimensions.
I went over on how I go about that in the first video of this build, if you're interested here's the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
Hallo, can you make a video how to clamp a German car to bench ( some cars does not have place like the Mazda you did )
Thanks
how can i find the parts that go with the fender apron for a hyndai sonata
For structural parts either go to the wrecking yard to get used parts, or go to dealer for brand new parts. All of my parts were from a dealer, and they were actually not as much as I thought they would be
Hey there, I was wondering, where do you get the measurements for cars? In your previous (Mazda) videos I’ve seen you have complete measurements of frame rail distance and so on. I’ve looked around and haven’t been able to find any info anywhere. Would you be able to help me with that?
He has access to official OEM repair documentation from his job through Mitchell estimation software. There's plenty of software out there that does the same thing, another one I can think of off the top of my head is ALLDATA. These software programs are not cheap and are intended for repair shops but you can purchase a monthly or yearly license for about $20 a month or $60 a year for ALLDATA DIY edition or $2,748.00 a year for ALLDATA PRO edition. You may get lucky searching the internet but I wouldn't count on it. You can try to friend someone who works in a shop and prints out/screen captures the info you need.
Man do you work for people?
I wonder where are you located?
How would I find body dimensions for my 2012 Lexus gx460. I had a minor accident in the rear and the rear door (hatch) closes but doesn’t line up perfect, same with right rear taillights
I always start by googling the chassis dimensions... Sometimes you get lucky and find them online for free... Other times you have to buy them, there are websites that sell dimensions for just about any vehicle
Can you give me the website repair that you use?thanks
There is no specific website, I just googled the chassis dimension for my particular vehicle and I was able to find some dimensions online
How to search car body diagram ratio paper? Can u tell me plz
I found the measurements online for free. I explained how I went about that in my previous video, if you are interested here is the link to that video: th-cam.com/video/3mwsqGRthSE/w-d-xo.html
@@fix206 Thanks bro😁
You got it 👍👍
no new videos 🤔🤝
I'm working on the next video right now... It should be out by this weekend
Hi sir can you send me the body dimension of mazda3 2010 sedan please
Lets be honest, those gaps look better now that they were at the factory.
6months ago are you ok buddy
I know it's been a while, and I feel terrible for not posting. I'm currently working on the last video on this Mazda rebuild. It should be out in a few days
@@fix206great new mate…
Good luck
Your video thumbnail is not good. But i like your video
Great video. Sorry if I missed it, but what is the name of the tool you used to pull the valley in the door? Not the clamp you first used to pull. It looked like a welder?
Can u fix my car ?
I generally just work on my own projects...
It's very interesting, but this vlogger is not going to be around for long. There is too much talk and not enough action. Viewers want to see more work on vehicles. He has tools he made himself, but I don't see a workshop he can work in.
Been here awhile, not planning on leaving anytime soon... I literally explain what it is that I'm doing and why I'm doing it that way as I am doing the work. Not sure how much more action I can cram into a video. The whole point of the channel here is that you don't need a workshop to get stuff done. If I had a nice facility that I worked out of, then lots of viewers may just get an impression that they wouldn't be able to do the same since they are lacking the facility
I love your videos. I would love to build my own frame machine like you do you have the blueprints I can follow
I don't really have any blueprints, I'm thinking about doing a more detailed video on the frame rack later down the road where I'll go over all of the dimensions. But if you're interested, here is the video of how I built that frame rack: th-cam.com/video/krCki0BT8Fw/w-d-xo.html