Permanent means per EPA if you fixed the problem and tried to clear the code, any Aftertreatment codes will stay at the back end of the ECM for 300 engine houres before they can can go away.
I replaced both nox sensors a little over a month ago and after I got def the led started blinking and check engine light is on and de-rated my truck what could cause spn 3226 and 5246 to come back on
3226 usually a exhaust leak in the exhaust system, or a clogged fuel injector, or dpf filter media bad, if the box sensors have been replaced they are detecting a issue in the system to set the code 3226. The code 5246 is a ireglitory fault, this is saying 3226 has been ignored and now the system is derated.
@@madmotorrepair1748 thanks I'm at the Walcott ia ta trying to get the codes cleared otherwise I'll just be stuck cause this truck is eating me out of house and home I've had it for 3 months so far and have spent a lot of down time and money in this truck and now I've got nothing left to put in it
i had the same problem eec 61 3226 f 4 . the light was on for half the day went away I still replace the knock sensor three days later the light come on again.. after doing some research the fault code says module control .
Mismo problema, cambie el sensor y en 2 semanas volvio la luz naranja. Asi sigo trabajando lo acabo de cambiar pues. El dealer cobra mucho por cada visita a veces creo que lo programan para q vuelvas
Awesome video. Sir..
Permanent means per EPA if you fixed the problem and tried to clear the code, any Aftertreatment codes will stay at the back end of the ECM for 300 engine houres before they can can go away.
Had the same problem it was a pin from the connector that was spread too wide
I need to ask your opinion, about code SON 520462. Is that something to do with ECM?
Where can I get the laptop and harness that your using
I replaced both nox sensors a little over a month ago and after I got def the led started blinking and check engine light is on and de-rated my truck what could cause spn 3226 and 5246 to come back on
3226 usually a exhaust leak in the exhaust system, or a clogged fuel injector, or dpf filter media bad, if the box sensors have been replaced they are detecting a issue in the system to set the code 3226. The code 5246 is a ireglitory fault, this is saying 3226 has been ignored and now the system is derated.
@@madmotorrepair1748 thanks I'm at the Walcott ia ta trying to get the codes cleared otherwise I'll just be stuck cause this truck is eating me out of house and home I've had it for 3 months so far and have spent a lot of down time and money in this truck and now I've got nothing left to put in it
For the parked regen. Why can't I start it it gives me error what might be the problem ?
Freightliner Cascadia Evolution 2016 dd15 Detroit
The code the one I have spn3226 fmi13
I'm not sure if this code for the same issue
i had the same problem eec 61 3226 f 4 . the light was on for half the day went away I still
replace the knock sensor three days later the light come on again.. after doing some research the fault code says module control .
tengo ese problema tambien cambie el sensor y sigue lo mismo.
Mismo problema, cambie el sensor y en 2 semanas volvio la luz naranja. Asi sigo trabajando lo acabo de cambiar pues. El dealer cobra mucho por cada visita a veces creo que lo programan para q vuelvas
Hello sir What if SCR test fail ? What could be wrong
Having fault code SPN 3253 in Hatz Engine
I mean.... you could have followed the procedure the first time and not wasted fuel and def fluid doing three regens on clean filters.
I have code 3226 fmi3 can you fix it for us let me know thanks
Hey do you found the issue? It giving me same code 3226 fmi 3 thanks
Brasil kkk
Faltou a tradução em Português! 😞
Mines spn 3226 fmi 20
You never said what i need to do
change harness or sensor nox