ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2019
- Are you looking for a quick video that shows you how to build an Arduino obstacle avoiding car at home? Look no further, in this video, I will show you how to build an obstacle avoiding robot using Arduino.
The process is very easy to follow that even school kids can use it on their science projects.
We have also included Arduino obstacle avoiding car code for your convenience. So, you don't have to look any further.
~ Arduino Obstacle Avoiding Car Code - pastebin.com/1kzTw053
~ Library Files - tinyurl.com/y3gulcpa
Things you'll need:
1) Arduino Uno
2) Motor Driver Shield
3) Wheels (4x)
4) TT Gear Motor (4x)
5) Servo Motor
6) Ultrasonic Sensor
6) 18650 Li-on Battery (2x)
7) 18650 Battery Holder
8) Male and Female Jumper wire
9) Sheet
10) DC Power Switch
Obstacle Avoiding Robot CKT Diagram - imgur.com/a/pOCv1C7
Here's another video that shows how to make bluetooth remote controlled car - • DIY Arduino Bluetooth ...
(We will add links to the product in future) - แนวปฏิบัติและการใช้ชีวิต
Thanks so much sir. I am in 8th grade and won the science fair in my school. 😊😊😊❤️❤️❤️ Only because of this project
Code dear
Can u send me it's source code
Wow. Congrats!
How to you coding in arduino
You used this code and libraries
thanks brother your video helped a lot,its not a fake video,really the project worked
thanks,thanks,thank you
Super bro very very great, phantastic and good job
I upload coad on obstacle car but they did not work please help me what I do with car
Bro plz say which rpm gear motor do u use bro and which mah of battery do u use bro
What is the range to control ? I mean how many meter away ?
My code get compiled but it's not uploading it says there is problem in uploading to the board
Ur code drives 4 motors but servo motor and uv sensors are not working can u help me
Can I use Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model
Aap ne ye Motor driver L293d pe female to female jumpers wires ka kaise laga ya
It is change direction automatically???
I have a question...I don't know anything about Arduino but I just got an assignment on it....If I go through this code and instructions, can I build it without anyone's help??or I need to decode again? Plz help if anyone knows
In which website you buy components
Sir please help me mu motors are not rotating
you are a genious man
can you make another video on computer programing?
salve, ho fatto tutto esattamente come descritto. girano solo le ruote. il servo motore non si attiva. ti prego aiutami
Bro,plz hlp me.my robot not work,code uploading successfully but not work,library file webpage is blocked.code is not work
Can you tell the model of the motor driver
Is battery is rechargeable
I am a beginner when the code does not work, is there a way to solve this problem?
Can I give it 12 v input
(Three 1850 battries)
i have problem my servo is not working i dont know why
Sir, is circuit diagram correct?
Can you provide please programming codes
Thanks for ur help bro
Can we code using mobile?
A1 scope is not declared how to solve this problem
How much will it cost totally?
Pls tell me how to make this with 2 motors
It doesn't move for some reason..... strangely my motor setup and battery work fine when i run Bluetooth controlled car.....but in this obstacle robot the motors seem to be straining badly
Hallo sir plz replaye sir coad work nahi kar raha ha
voltaje and A?
Ur program was not running in my laptop,,..plz help me
Before I compile the sketch there was undeclared things ,what are those?
battery specification please
Y OUR description not show the CODE
bhai ya sara sman kha melga or yh palt bi
I want kit how much price
Please help me bro software creating
Total cost
Why does an error appear in the code? لماذا يظهر خطأ في الكود؟
From where the code starts
Coding me error aa rha h any help me
Aiya oke cod aka ghanna kohomada ???? 😍
does it also works with 4 AA battery or only Li-ion battery
It worked with the 4 AA batteries for me. So, yes
Hi 5x Gear If I increase the chasis size from 9x14, to few more centimeters, will this works same?
Yes
I need help in this project
Plz help
Programming Processing some confusing so make one specific video to the programming please🙏 😊
Yes you are right
Please answer me that were is coding brother.........
what material did you use for the base ???
You can use cardboard
which motor driver shield do you use please tell me (link)
Good job sir..👍
Thank you, keep sharing our videos
😊ys ofcourse.
what arduino version you can use?
Can i use 2 motor in place of 4 if YES then code is same or any change?????
Then the code will change
Super bro amazing
Can we use simple dc motor
Yes but have to use other wheels
Sir without seeing the obstacle canit move further in the following direction?
Please reply
Please send me in full information
Hello, hey, I wanted to ask you a question. I copied the code from the robot and it doesn't grab the code. It appears to me that it has errors. Thanks for Reading this🙂
Can you tell me what error it shows?
Where can I get the items of this car for making my own car?
To Buy this complete project kit visit the online store 👇👇
techparts.in/product/5f8fd4f1dd26bf1bf89fb818
They providing very good service and also offering free delivery so guys make use of it and rock it
super bro
please.. send me the code
what change i need to make in the code so that i can turn my robot more when an obstacle is located. plzz healp as soon as possible
Adjust the delay
you may adjust the delay to a longer time.
@@sachingarg5199 means please tell me I'm just 12 and I have an assignment to do a robot who can find located obstacle
Superb video
Sir motor kitne rpm ki use ki hai apne???
I make this car but they did not work
Good will try
The normal motor driver shield doesn't have the thing in which you've put the jumper wires of the ultrasonic sensor..... What is that called???
@5xgear please help buddy!!
you will have to buy some female headers and solder them on to the shield ( I you use male headers, use a female-female jumper wire, if you use female headers, use a male-female jumper wire), there are a few holes on one corner of the shield.
@@sonifasharmin3609 hey so where to solder it there are holes but if we solder it where does it get its connection is it already in board holes plz reply
@@sonifasharmin3609 wouldn’t soldering burn the plastic off the male/female headers ?
we should on the robot when we upload code?????????????????????
Thanks for the video! It really helps me very much with my design project. However, I would like to ask if anyone knows how to code in Arduino so that the robot can STOP automatically on its own? Much appreciated!! :))
@Abhishek maddeshiya Can you give me your whatsapp number هل يمكن أن تعطيني رقم الواتساب الخاص بك
ddid you fidn the code? if so can us end it to me? o make it stop on its own?
mobile se code keise
Hi bro
How to work in sketch app when installed first
Code error
Can you please make a vedio on coad of car plz
Dear brother, I worked for the robot, but there is a problem when I know how to program the robot. You can do a video about how to program the robot from the computer
i can show
@@srikantca143 plz show bro plz I request u bro plz
Super bro
I tried all the ways. But I am getting a strange alarmic sound. Not sure which is emitting the sound Arduino or L293d shield. I'm a beginner to Arduino and I'm a mechanical engineer and I only know basics of electrical and electronics. Only the servo is working, that too only if I connect to my laptop. All the 4 BO dual shaft geared DC motors are not even moving an inch. But instead getting the strange sound from boards. Initially I thought that two 9v dc batteries are not giving sufficient amps to motors. Hence I tried connecting 4aa size batteries to L293d and 9v dc to Arduino. But nothing is changing. The output from motor pins of Ada fruit L293d is too low to drive the motors. That is what t I am thinking after wasting a whole day with this project by trying various connections with aa cells, 9v dc batteries, USB connector to laptop. Arduino is not damaged. It is still being recognised by laptop, the LEDs are glowing. And I tried uploading and resetting several programs. Arduino works very fine. I'm suspecting L293d, because one of the ic 's is getting really hot. When switched on. But the green LED is glowing and servo is working fine. I'm really loosing my mind. Please can anyone guide me with this issue.
Thank you and sorry for lengthy comment. I have no other option
i had the same issue when i connected 6 x AA batteries. It turns out, you need two of thos 18650 batteries connected in serial and it works.
I connect ed 2 lithium battery in series but motor runs for 1 sec and stops randomly and start randomly
Pls solve my problem
When i connect to laptop it works perfectly
Same happens with me
This project is a headache
me also some problem :(
Bro after aploding the code and powering up. There was a beep sound and no wheels are moving. Please help me with this problem 🥺🥺
conecta 12v con 1.5 A en la alimentacion del arduino
@@JeffBv19 thank you bro
I got same problem Is it working or not Bro?
hello bro can i use 4 battries 3.7 v ??
How do you add pins motor shield
sir,which program do u use to upload the code
Arduino IDE if its arduino
i am confused too
Arduino ide
Which battry you use
Ue dekh raha hai ki rasta kidhar se khoola hai
Is this source code for Arduino uno made in Italy version only?
Yes, will also work on chinese replicas
what is the model of motor driver?
Very good robot and correct code. Working properly. Thank u
Thank you sir I am in 5th class my school project is completed.
You used this code
Version of Arduino you can use?
Bro pls share that how to by the product to make this
To Buy this complete project kit visit this online store 👇👇
techparts.in/product/5f8fd4f1dd26bf1bf89fb818
They providing very good service and also offering free delivery so guys make use of it and rock it
It Is Showing Use of Unclear Identifiers after compiling is done and compiles error
Please, add the library files needed for Arduino.
@@5xGear i added library file, then also show this problem
For motors, you are having batteries! For Arduino board, where you did the wiring? How it is getting power ?
Bro he attached Arduino to moter driver which is directly connected to battery
Can this be made using Arduino kit??
Dziękuję. Dzięki Tobie mogę się rozwijać i uczyć. :)
Niyamai sar
does the codes work on 2 wheels only? HEEELP
No it will not work
ERROR IN CODEING
My Rear Wheels are not working when i connect it to motor driver initially they were working but no there is very less supply of power to the rear motors. What should i do now? Please reply me as soon as possible
Recharge batteries
Correct bola
Change the terminals?
this code needed some debugging, please dont mind it brother, m just an curious person who love electricity just like you,
hear is the debugged code:-
#include
#include
#include
#define TRIG_PIN A0
#define ECHO_PIN A1
#define MAX_DISTANCE 200
#define MAX_SPEED 100 // sets speed of DC motors
#define MAX_SPEED_OFFSET 20
NewPing sonar(TRIG_PIN, ECHO_PIN, MAX_DISTANCE);
AF_DCMotor motor1(1, MOTOR12_1KHZ);
AF_DCMotor motor2(2, MOTOR12_1KHZ);
AF_DCMotor motor3(3, MOTOR34_1KHZ);
AF_DCMotor motor4(4, MOTOR34_1KHZ);
Servo myservo;
int dssl,dssr;
boolean goesForward=false;
int distance = 100;
int speedSet = 0;
char last_turn;
void setup() {
myservo.attach(10);
myservo.write(115);
delay(2000);
distance = readPing();
delay(100);
distance = readPing();
delay(100);
distance = readPing();
delay(100);
distance = readPing();
delay(100);
}
void loop() {
int distanceR = 0;
int distanceL = 0;
delay(40);
if(distance
How to download a AFMotor sir.
@@johnnoelnavigar3615 install it from SKETCH ---then ----libraries----then-----MANAGE LIBRARIES
thanks a lot dude
Bro after uploading ur code only servo motor is running,but wheel are not running what should I do now?what would be the problem?
what sheet is this one?what is the name of this sheet?
In the motor drive shield you used some pins which usually does not comes with it so from where did u get that?
@Sanchit Gupta zzvz. zz v xzvv. Vzv. Zv औओऔऔऔ
It's called pin header... But u can use male to female jumper wire... Or female to male jumper wire ok😄
what is a af motor this progeming is not work
Please, add the library files needed for Arduino.