Samsung Galaxy Tab 3 P5200 GT-P5210 P5220 10.1" Battery Change

Samsung Galaxy Tab 3 P5200 GT-P5210 P5220 10.1" Battery Change. Replacement battery sourced in this video is available from Amazon amzn.to/2VJndYh

[@amnakahrshadow4527]

I was in despair over a seemingly broken Tab 3 until I followed your instructions. The LCD cable was out by just a small amount and that was
enough to have the screen show only a black screen. After removing the cable and then reinserting it in more firmly the screen came back on.
Much appreciated for a tutorial that was both informative and easy to follow.

[@fiveminuteman]

No problem! 😀👍👍 If anyone does get this probably and you can't fix the screen straight away make sure the tablet is charged. Our tablet unfortunately ran down to 0% battery and since then wont charge beyond 80% but on the plus side no more screen problems.

[@Theladypam82]

Thank you for a brilliant tutorial, I did it !! and its working again.

[@The-truth-is-valuable.]

I need to do mine tomorrow. This is going to help a million.

[@fiveminuteman]

It's fairly simple to do👍

[@ArsenPotentier]

Very informative exactly as required.

[@fiveminuteman]

Glad it helped

[@leandrorabellino7082]

soft work. 😜🤙

[@vanessacardoso3741]

Excelent!

[@fiveminuteman]

Great stuff 😃

[@thelostarceus4130]

I connected mine to the wrong voltage, so it shorted. Which part is it that I have to replace?

[@standardtuning4guitars423]

does anyone know why my power button stopped working and my headphones are recognised anymore after intalling the battery? this process is so easy to mess up its ridiculous.

[@RENEGADO82422]

👍

[@fiveminuteman]

Many thanks

[@NikyRipy]

Wrong, wrong.
You mustn't open this tablet in this way.

[@fiveminuteman]

It's fine.no damage no Mark's left.

[@NikyRipy]

@@fiveminuteman But that's not the correct way to open it. You must remove the backcover+ case together, not only back cover.

[@fiveminuteman]

I have worked on 100s of these tablets and had no problems.

[@peterbond5888]

You speak to mutch and not show how to replace the kabel.

[@fiveminuteman]

Disagree qnd you would have to be pretty stupid not to understand how to replace the cable.

[@The-truth-is-valuable.]

@@fiveminuteman - Taking into consideration... it is 1: Lift up connector tab... 2 move (pull) ribbon cable lightly out... SO, how difficult is it to re-insert it? And press GENTLY down the "hingy" black connector "thingy". (Might be a good idea to switch on and test the Tablet before replacing the back cover)

[@fiveminuteman]

@@The-truth-is-valuable. all worked fine and ribbon cable was in snugly👍

[@The-truth-is-valuable.]

@@fiveminuteman (I could see that, and I thought you would understand it was not meant for you. It was in support of your reply to him)