If you have the light flashing: Set it up. Ignition on. Wait for start stop to light up (or press it if doesn’t automatically) and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
Great demo. On my mk7.5, the bottom trim piece was hard to get off. With some gentle persuasion, it finally released. The device seems to be working well now. Wish I had it on there 5 years ago...
It's normal for a car to "save power" or shut down systems if it's been idle for more than 24/48 hours. It's quite strange what you're experiencing. If the car is used, it works fine without any issues, and the settings are memorized and disabled. However, if the car has been parked for the mentioned time and you start it again, it doesn't remember the off position of the SS system. Has this happened to anyone? Thank you.
So,,, I have an Amarok,,, to stop the Stop Start Feature, disconnect the wire that goes to a little black box hanging off the negative terminal of the battery,,, no more stop start for me
@@mrfixpl Thank you for the reply. You inspired me to do some digging and found the one for my car... It's a little more expensive... But honestly to cure this headache it's worth it. Just in case anyone else is looking for it. Search "E210 brake hold" and you should be able to find it. I would post a link but they'll probably take the comment down.
Thanks for your great videos. I have already used several to make my golf better. Can you tell me how you put the charging cable through the vent (blower) above the radio display?
I have one of these. A very inexpensive and good solution. The OBD11 solution doesn't work as well because it usually throws a code. An often saught after solution on VAG forums.
Excellent! You said this was possible through obd11 - do you know how? The obd11 "apps" for this car only show an option to permanently turn off "start stop"
You thing if its possible to add Mode button and activate different modes if your car does not have this?? Also traction control button or any one arround the gear lever?? Thanks
Non serve a niente, la macchina si ferma e si accende in automatico da sola. e inoltre ha il pulsante per disattivare o attivare lo start e stop, mi spiega qualcuno a che serve?
@@mrfixpl I never thought of it that way. Ever since this video I’ve been manually turning it of everyday just to see how I like it. I think it’s better. Will order the plug now 🤣
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
Hi I've installed this on my golf gtd and the stop and start button flashes on and off not fast just every like few seconds when the car is locked is this normal.
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
@@MT-kx2ucI'm afraid you are talking about different version of the bypass. My also blinks after the ignition is off and your method is not working. Maybe I'm doing something wrong...
As always - so very nice filmed and explained. THANKS...
✌️
You have the best channel. Thank you for taking the time to make these detailed videos!!
That's so much for this video. Works a treat.
Happy to help!
Yes, that was the question that i wanted to ask after video from yesterday. Thx 😊👍
If you have the light flashing:
Set it up. Ignition on. Wait for start stop to light up (or press it if doesn’t automatically) and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
I ll tried this, but it doesnt work
@@TonyAngelino. Twied it surely..
@@TonyAngelino. Same situation... did you get it?
@@TheUkra it s gone after few fays
@@TheUkra It s gone after few days
❤👏👏👍🇬🇧🥃
The auto start stop button keeps flashing after I installed it and turned my engine off … any solution?
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
Great! 👋
this does not have enough views
Maybe you should share it on forums and groups? 😅
Appreciate the steps. I was stuck on that lower piece of trim and was worried I would break something. This video helped me out
This will fit to Leon III 5F?
Great demo. On my mk7.5, the bottom trim piece was hard to get off. With some gentle persuasion, it finally released. The device seems to be working well now. Wish I had it on there 5 years ago...
I assume this would work the same for mk7 which has a Start/Stop ignition button as apposed to yours which has a standard ignition with a key?
Key / keyless shouldn’t Matt over here.
It's normal for a car to "save power" or shut down systems if it's been idle for more than 24/48 hours. It's quite strange what you're experiencing. If the car is used, it works fine without any issues, and the settings are memorized and disabled. However, if the car has been parked for the mentioned time and you start it again, it doesn't remember the off position of the SS system. Has this happened to anyone? Thank you.
Would it work on T-roc 2020?
Wheare im can buy that?
So,,, I have an Amarok,,, to stop the Stop Start Feature, disconnect the wire that goes to a little black box hanging off the negative terminal of the battery,,, no more stop start for me
Does this work for Seat?
I have the same question. Seat Leon 5f?
Hell yeah see this and buying now like this minute 😂
Let me know did it worked for you
.... Okay wait does this mean that I can use this in my Corolla hatchback to auto press the brake hold???
Well, this is for VW Golf Mk7 and couple other VW vehicles. I don’t think it’s going to fit Corolla just like that.
@@mrfixpl Thank you for the reply. You inspired me to do some digging and found the one for my car... It's a little more expensive... But honestly to cure this headache it's worth it. Just in case anyone else is looking for it. Search "E210 brake hold" and you should be able to find it. I would post a link but they'll probably take the comment down.
Thank you for the video. It's my first start-stop car, it was driving me crazy. This fixed it nicely!
Hi, has anyone problems with such adapter, on my car Skoda superb 3 the battery is running out fast after installation. Thanks
I am looking to install the "drive mode" button of a seat arona/ibiza kj7, but I cannot find where it is connected, hopefully someone can help
Thanks for your great videos. I have already used several to make my golf better. Can you tell me how you put the charging cable through the vent (blower) above the radio display?
Will it work on a 2012 VW CC?
thank you very much for all the information you have given, you are very nice, I am looking for the solution of app connect mib2.5 if you help me?
I have one of these. A very inexpensive and good solution. The OBD11 solution doesn't work as well because it usually throws a code. An often saught after solution on VAG forums.
just ordered one, nice way to disable it without using obd eleven, and now the system stil works, awesome!
I just received my order and installed it right away. I recommend it to everyone!!!
I almost bought one for $60 plus transport. Guess it's the same product, haha.
Any knowledge how to add e-sound for Golf Gte mk7.5? I know its possible and pre istalled in some facelift models
please ,do you know where i can get the fusebox diagram for touran 2016 ( 5T) ? i tried everywhere but no result.
Excellent! You said this was possible through obd11 - do you know how? The obd11 "apps" for this car only show an option to permanently turn off "start stop"
is it work for leon 5f 2018?
You thing if its possible to add Mode button and activate different modes if your car does not have this?? Also traction control button or any one arround the gear lever?? Thanks
It is possible but it will require adding activation code by default. Sadly it’s not a DIY job.
@@mrfixpl really for me is not necessary, but is interesting. Thanks
I have the same car with manual transmission only and it is not the same when I opened it?
Will this work for 2015 octavia 5e?
Different module (not sure if connector itself or the pin out). Also available on AliExpress.
Hello! Does this work on VW Polo Comfortline? Thanks
Non serve a niente, la macchina si ferma e si accende in automatico da sola. e inoltre ha il pulsante per disattivare o attivare lo start e stop, mi spiega qualcuno a che serve?
Thanks. Video shared on ILL Dubs group.
Is it good for golf 7.5 2019 ?
Just ordered one, and thanks for all these videos! and also thanks for responding on email! was very helpful with the MIB2 retrofit!
Work’s perfectly 👍💪
Brate, jesi ti iz Srbije ?
Why is everybody so annoyed by start stop always? I don’t mind it.
Some do mind it. I personally hate it. Cuts the oil flow to turbo for me example.
Premature starter failure, excessive wear on the battery, and God only knows how much extra wear and tear on the bearings.
@@mrfixpl I never thought of it that way. Ever since this video I’ve been manually turning it of everyday just to see how I like it.
I think it’s better. Will order the plug now 🤣
@@brianshorey I see I see 👀
Iz fu.. you engiene
without contact IT s normal to flash the button start stop? A-off flashes after instal it
mine is doing the same thing
@@rabizable so what can we do?you left it instaled?or,not?
@@dragosvoicu139same for me
@@dragosvoicu139i found that my car keeps getting power so dat means i can still use my windows etc. When that stops working it also stops blinking
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
thanks!!
Hi I've installed this on my golf gtd and the stop and start button flashes on and off not fast just every like few seconds when the car is locked is this normal.
Set it up. Ignition on. Wait for start stop to light up and wait 3 seconds. Press the start stop 3x in succession. Wait for it to light up again straight away with 3 seconds (1) press 2x for memory mode, or (2) press 3x for always off by default mode (wait for button light up), or (3) press 4x for service mode (wait for light off)
@@MT-kx2ucI'm afraid you are talking about different version of the bypass. My also blinks after the ignition is off and your method is not working. Maybe I'm doing something wrong...
Funziona benissimo
Ce l'ho da 3 anni
Supert tare explicația !!!!
OMG i was looking for this video from you yesterday and here it is.😍
is it safe?
No