Well it looks good, however it does depends what you need it for, and definitely how many of this you need to make ! Then it is a waste of time and material, for sure, something to note is that the stronger point still only where the 2 wires meet, and still only same points of contact as if it was done the " wrong way" all the twisting does not provide any more streng.
It will break right at the bend if used for fencing the wrapping looked purty and tight but pull it tight with fence stretchers and it will break sooner or later been there done dat
Ek swal hai, k agar breaker mein main wire ni ja sakti meter wali, to kia us men jor dal kar breaker men Laga sakty hen? Dosra yeh k breaker bar bar hil kion jata hai, light automatic band kion ho jati hai? Kia us jor wali wire ka issue hai?
you know, I had a teacher in middle school in electricity class that taught us different connections of wires, this one he called it "western connection", don't know why but he explained us that each connection was for a different electric situation
There's a Wikipedia Page on the history of this joint... The full name seems to be Western Union splice, named after the American telecom corporation. I knew of it from the NASA testing that was done on it later... They're apparently fans of the joint, it's how you're supposed to join wires in a rocket now.
If that is steel wire it is very low alloy and annealed to a dead-soft state. You sure can't twist most electric fence wire that way because it is too stiff and strain hardens the first time it is bent.
Muy chingon el tutorial Pero no mames bro cómo vrgs voy a elaborar esa madre cuando estoy trabajando en una cerca, Sabías que las cercas tienen un límite de poder trabajar con el puto alambre!!!!!!!😑😑😑
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
You have fingers tougher than steel wire. Wire twisting skills are outstanding too.
Well it looks good, however it does depends what you need it for, and definitely how many of this you need to make ! Then it is a waste of time and material, for sure, something to note is that the stronger point still only where the 2 wires meet, and still only same points of contact as if it was done the " wrong way" all the twisting does not provide any more streng.
آپ کی انگلیاں سٹیل کے تار سے زیادہ سخت ہیں۔ تار موڑنے کی مہارت بھی شاندار ہے۔
O yar itni mehnat koi nh kre ga.
Wao very amazing super effective and informative video because of your vlog tutorial I got some knowledge from you
You are uploading very useful videos bro... Thanks for best videos... Keep it up
Joos banget kawan
Wowwww this is awesome, thanks for sharing ur ideas
It will break right at the bend if used for fencing the wrapping looked purty and tight but pull it tight with fence stretchers and it will break sooner or later been there done dat
Good work
Very good practical video
Very informative and useful video it was.
Bahut khub
Ek swal hai, k agar breaker mein main wire ni ja sakti meter wali, to kia us men jor dal kar breaker men Laga sakty hen? Dosra yeh k breaker bar bar hil kion jata hai, light automatic band kion ho jati hai? Kia us jor wali wire ka issue hai?
Good idea! but remember time is money.
A stitch in time saves nine!
Плотность первой скрутки в два раза выше и нагрев соответственно ниже, а вторая просто эстетичней.
About the joint you have clearly explained but need a safety because our staff are professional so he is doing that work on live line ....
Good job
What an idea guruji
Just use the proper connectors.alot quicker and no bending.
Very good सर
you know, I had a teacher in middle school in electricity class that taught us different connections of wires, this one he called it "western connection", don't know why but he explained us that each connection was for a different electric situation
ท ท ท ท ท? ท ทท ท ? ท ท ? ท ท ? ท ?ท? ท? ท ท ท ? ?? ท ท ท
There's a Wikipedia Page on the history of this joint... The full name seems to be Western Union splice, named after the American telecom corporation. I knew of it from the NASA testing that was done on it later... They're apparently fans of the joint, it's how you're supposed to join wires in a rocket now.
That's a Western Union splice. I was taught that method back in the 80's
Is it taught in electrician school
Didi
In case no other utensils then use this alternative method to make things more easy
Good video
Hola! Excelente!!! Muy buenos los vídeos y muy intructivos!! Saludos cordiales
Nice video idol
Rất hay
Bht khoooob.. 🌺
Thanks 😊
The best
Thnak u so much sir 😇
Оно конечно красиво выглядит, но нужно иметь ещё 30см. провода для такого соединения
yuiuuuuu8
Trabalho informativo, muito bom, tmj
Love From sri lanka.♥mmmmmmmmmmmm
sri lankans Like❤
Apart from the background noise, a great vid.
Thank you for this.
Ye jass (aluminium) wali wire nhe he?
ขอบคุณครับ
Super videos
Lot off nice joint
Thank's now i kmow about
Quedo bien calentado ese alambre.
Good technique
Watched n subscribed npo ako
Awesome review thanks very helpful, please tell me background music song name
No reply
Bro please tell me background music song name
Thank you
Super
👌👌
Diameter of that wire? Pls reply.
heloo sir ...plz tell me what gage or thickness of wire is, which you use for that purpose
Probably 2.5 square millimeters.
10mm ki wire pe nahi lagega ye
Thanks
brpa panjang yang di putar putarnya ?
cool vid
Nice!👌🏾
Another option: use a third wire. (In México: "MADRINA")
After some period here spark accurs and complain not proper voltage pass through this wire
Good
Muy bonito y todo, pero yo ya me hubiera sacado un OJO... 😁 😁 😁
Nice bro
Zabrdast..🌹
That's good idea
Excelente
Cool 😎👍👌💯🙏🙏❤️
Nice
We're to get this type wire and name of the wire
Iss joint ko kya kahte h
True shit
Meaning you are telling to use more wire for the joint. What to waste more???😂
Keep such ideas to yourself 😉😉
That guy has nothing better to do
True!!
@@mrkps1986 Thanks buddy, i had seen this a year ago 😂🤣
No hate, just saying that the wire looks like aluminum not steel
If that is steel wire it is very low alloy and annealed to a dead-soft state. You sure can't twist most electric fence wire that way because it is too stiff and strain hardens the first time it is bent.
Did I do it wrong? I made barbed wire on accident
Tks you
Show de bola parabéns👏👏👏👏🖒🖒🖒🖒
👍👍👍
I believe this is called the "western union" twist. A method used to repair telegraph lines.
This type of joint is called Brittania joint.Yes this was used to attend the snapped telephone/telegraph aerial lines used in those days in India.
My luck I would go to all that trouble only to have it break in the middle
with volume: 0/10
without volume 10/10
Yes sir
Thank you ❤️
You’re welcome 😊
@@MehboobElectric Do you think i can do this with my parking break handle truck. Thank you.
Klass kruto super 👍👍👍
Great
Ye joint bhi Mai college Mai banaya hai
Tebrik ederim
👍👍👍👍
I use the gripple thing
❤❤❤❤❤❤
No es por nada, pero las pinzas están desgastando mucho el material a cada que lo enrosca, se ve bien lastimado el alambre.
Супер
Good100%
TOP
😁😁👍💜
Make it in a soft wire
EH Eh. Ah ah. Oh oh . Hei hei 😂😂
Doesn't do the same thing. That double coil wrap is for splice not for tightening a wrapped bundle.
Gostei.
Song name plz
12 Silot 24 Tith Slip Ring Mixar Graindar Armature Winding
Muy chingon el tutorial
Pero no mames bro cómo vrgs voy a elaborar esa madre cuando estoy trabajando en una cerca,
Sabías que las cercas tienen un límite de poder trabajar con el puto alambre!!!!!!!😑😑😑
Hey! Hey! Hey! Hey! Yeah yeah oh oh yeah yeah oh oh.....
🙏👍👍👍
👌🏻👌🏻👌🏻👌🏻👌🏻❤👍🏻