Everyone thinks working with multi-ton parts is hard but after a lifetime of machine work I can tell you the small parts are the real challenge. I am amazed at the level of detail in this assembly. Very seriously impressed, this is watch maker level precision.
I think working with the heavy parts is hard, but I definitely agree that working with smaller parts presents its own unique set of challenges. It's much easier to get a grip on a tie rod than it is a tiny screw. Especially when your old like me and your eyes and fingers don't want to work like they used to.😁
I love how, because of the last video on mini engine building where a ton of people were questioning your timing of the cams, you show the TDC/timing marks/process on this one. :D
I'm thinking the poor exceleration is due to the timing being 12* Before TDC (top dead center), not 12* BELOW TDC, and work up from there, like it should be......
@@wigs1098 Either way, it still sounded like a timing issue whether it was retarded too much and needed to be advanced or visa-versa. I'm guessing one or two degrees different would have resolved it. But then a leaking front seal and by the look of the smoke, either the rear main seal or head gasket was starting to go too. Some of the parts weren't machined all that well too which made me wonder about the overall quality of the system although it is still very cool.
Search for toyan engines you will fing some pretty cool stuff: v8, rotaries (including a 2 rotor one), inline 4rs, 2 cylinders, single cylinders and even a supercharger for the toyan v8 with that awesome whine
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Wow an actual miniature version of a real engine! All the other ones I've seen are not in my opinion because they are not fired with a spark plug and do not have an oil system. This engine is way cool!
@@77funtomas Yeah diesels use them but many of the old school Cox motors for rc planes and cars used a glow plug , not a spark ignition… I think that’s what he’s talking about
This seems like an incredible way to teach young children/ novices or even just people who want to learn the basics of engine mechanics. I mean if you can understand how this works you’ll be less likely to get ripped off by a dodgy mechanic 😂
@Repent and believe in Jesus Christ you need to keep your remarks in your home and in your church. You are the one who blindly believes in virgin birth and coming back to life after death. You are the one who talks to an invisible friend. Virgin birth is a lie and all of Christianity is based on this lie. You and those like you want to take all the advantages of modern science and live a good life while you're trying to drag us all back 2000 years with superstitious nonsense. So shut it up.
The I interesting thing about the flathead is that it runs. Nobody should kid themselves that it runs well, or is fuel efficient. Beautifully made model, though... no getting away from that!
This knocks the spots of these Toyan engines imo, the wet sump, the plugs etc make it a real 4 stroke. I’d like to see this one in an RC car, being a side valve engine, a body to suit the era of when that engine was in production (1940’s 1950’s) style bodywork.. It’s a shame there’s such a limited run on them, I should imagine that they’d be snapped up!
A pietenpol aircamper used a model A engine, I reckon it'd be cool to see it spinning a propeller on a scale model of one. I too was disappointed when I saw that it's only a run of 100.
Deceptive editing techniques were used to hide the process of adding several tiny hamsters into the block. If you slow down the video by about 400%, you can hear their faint squeaks.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
You probably get quite a bit better behaviour setting the ignition timing to 28 degrees BTDC. This finally looks like an engine that is designed with doing serious runtime in mind, Like the centrifugal cooling pump and the geared oil pump.... Hate the fact that they are belt-driven: No oil pressure alarm, no cooling water temperature alarm, so a snapped belt will lead to near immediate selfdestruction. Solution: place a motion detector on either one of the pumps, that shuts down ignition if no RPM is detected. That will with 100% certainty be an engine saver, because those belts ARE going to snap... The valve adjusters also are most likely going to lead to trouble, and to remove them, the head needs to come off or there is not enough clearance to move the valves.
@@redneckasmr-xd1gg I can assure you that that is absolutely UNtrue... I run several small gassers (< 3/4" bore) and they all time out optimal at 28 deg BTDS. That is, setting the timing with a full bore running engine and a tach...
This is just a shitty quality engine overall. Gears suck, etc.... too many cut corners, too low of a build quality, I wouldn't have bothered buying this, much less waste the time putting such a poorly manufactured engine together. Total waste.
Впервые узнал и увидел...это просто Класс! Удивительно то,что всё миниатюрное..маленькое,а главное что этот двигатель..работает! Спасибо за увиденное чудо! Успехов Вам и здоровья!
Not gonna lie! This thing had the best idle I have heard in a while! It was running bad, I hope you tune it out and show final results! Great video as always Johnny!!
my old sailboat has the grown up version of this, they called it an Atomic 4! what a great engine design, 62 years later and still runs like it should.
I loved building models as a kid but never in my wildest dreams would I have done that one if they even existed 50 years ago. Very cool!! Actually I looked at the prices and even if they did exist my parents would never have bought me one!
Even if it costs three grand and he just changed his hobby halfway through the last one just like the last 20? Maybe to help him pay for it or have him do some work that he can get paid for. You don’t always just buy your kids whatever they want just because they want it. Usually you can pick out the one child kid that always got what he wanted no matter how expensive it was. I don’t think I even have to tell you that it’s good for kids to work towards something nice.
This is something that EVERYBODY must experience in school, university, as a personal hobby, collectionist or educator. This is top learning with a 'toy' that IS NOT a toy. This gives a clean idea what technology is. I could simply assemble it and have it as a decoration piece that is dismountable or make it WORK as a classical engine. I can't explain how important this is. Schools must provide these experiences, with lego, THIS, block bending, block motors from lego and all other things. Learning should be FUN again. Yeah, make learning FUN agan. :3
Such phenomenal toys we have today. When I was a kid I got to play with dirt, bicycle was used for getting to school and back. We used to throw a trash can lid like a frisbee before the frisbee was invented. Built a go-cart, couldn't afford a gasoline engine so we used a electric bench grinder motor. Worked great until the extension cord ran out of range. We only dreamed of stuff like this.
It really looks like your coolant stopped flowing and was boiling in the engine toward the end there. That pump might not be spinning fast enough/got airlocked at some point.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Interesting the differences between this and the Toyan engines, I wonder why they went with a flathead design? Normally flatheads aren't stellar for power or efficiency, but it probably will run for a very long time! I really appreciate that this has actual spark plugs and ignition system, as well as an oil system, pretty cool! I hope you can get it running proper. Looks like there might be some design improvements to be made.
I would just like to mention, great build, but because you have set the spark plugs to 15* before tdc, the engine has low rpm and misfires, as you can see from the exhaust, flat head engines are meant to have around 4*-10* before tdc. But still, great build.
I have only one word to describe this, WOW! My first time here and I’m blown away and have enjoyed watching this short more than I could imagine. Keep up the great work.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Ever thought about making a mini muffler/fart can and exhaust system to make one of these sound different? Sounds like an open header 4 cylinder but if you threw some small scale back pressure with a longer exhaust at it would it sound like a legendary 4 cylinder engine? Could probably even make a tiny bov for the boosted ones.
Another great tiny engine build Johnny could you make a pulley and bracket for a DC generator or an alternator to power the engine so it's not entirely relying on the battery to keep running?
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Impressed by the fact it uses metal or "real" piston rings, not to mention two of them per piston. Ive seen some of these small engines that use an oring for a piston ring...heck nitro rc engines, which is what I have a few years of experience with, don't even have piston rings of any kind
Pretty cool! I have almost the same real engines in my 1948 Willys CJ2A and my 1952 Ford 8N tractor. Good to know even a brand new flat head 4 banger will pop at idle...lol.
Hey Johnny, Hadn't seen you for a few weeks, perhaps. Good to see another miniature engine coming together. But I wanted to ask, is that brand Cison any good? Unless lapping the valves isn't an option, it was sounding kind of rough. Anyhow, good to see you back. 🏎
Yo i like how the bearings are kept from spinning in place, theoretically, by some sort of hardware. Im sure some ungodly amount of torque can get them to spin but this will help prevent that. 🤘🏽✌🏽👍🏽 awesome vid as always
@@davelowets with hardware directly on the bearing? Maybe hard wear holding a bracket that holds the bearing, but im talking about a bolt in direct contact to the casing of the bearing itself like in this engine in this video. Yea some engines do have that but not every engine.
@@tomaslongoria2449 I'm not a big fan of screwing the end of a fastener into the side of a bearing race to hold it in place. The race of the bearing can easily be crushed out of round by a fastener that's a touch too long, or by too much torque on the fastener. I prefer the normal way with split bearing shells with tangs on them to keep them from spinning in tje housing.
That "carburetor" is pretty sketchy. Probably the rough running problem. Also isn't there supposed to be a break in for the cam and lifters? ie 2000 rpm for 15 mins or something.
Honestly a cam break in on an engine this small that's essentially an ornament really isnt gonna be that big of a deal. Also the breaking in which really only matters for flat tappet cams, is varying high RPM for 20 odd minutes, you don't want to lug them or have it sit at one RPM.
Awesome content! Your videos are always so pleasant to watch! 😀 When assembling this engines, you think you could, somehow, make the way the fluids and gases flow through the engine clearer? 😁😁😁 Although you said it runs bad, I loved the sound and the look of the engine. Thanks for showing it!
Вот это "игрушка" для взрослых дядинек ! Прекрасное исполнение исходных комплектующих . И какая сборка ! Мастер ! Отличная лабораторная работа для обучения двигателистов в колледже !
Да такие вещи надо в детском мире продавать по доступным ценам, и папаши вместе с сыновьями будут собирать... А как обучающий комплект в ПТУ или технарь, вообще незаменимая вещь... Но габариты должны быть уже другими.. PS. Себе бы такой купил... За приемлемые деньги... Но увы и ах.. Стоит наверно как чугунный мост в Москве...
@@ВладимирБир-ж9к Да , цена наверно кусается Это фактически малый двигатель , Для папы и сына после 13 лет . В каком сейчас классе изучают устройство ДВС ? Наверно проще будет семьей перебрать двигатель от Оки - по цене .
Беда в том, что заставить чадо ковыряться в старом, грязном, б/у двигателе Оки, большая проблема. А здесь всё новенькое, чистенькое и маленькое. Таким заинтриговать проще. Р.S. Имхается мне, что такое наши чинайские братья делают. Особенно учитывая неровную работу продемонстрированного экземпляра. 😂 Похоже, не только опережение зажигания не на месте, но и фазы газораспределения сдвинуты. Кстати, приличный шелест при прокручивании вала на сухую, говорит о том, что детали парами не обрабатывали. Такое прикатывать и прикатывать, и не факт, что прикатаешь.
@@АлимСадыков-и5в Продолжая опасения скажу ,что только технически продвинутый папа сможет устранить все недочеты (недоделки) указанными Вами . В результате - выброшенные деньги и надолго испорченное настроение . Наверно лучшее - такие наборы собирать как в старые времена - в кружках , Домах юных техников и т.п. И опять все это упрется в деньги .
@@vladimirgarbuzyuk8408 Увы, но сейчас ВСЁ упирается в деньги! А ведь были времена, когда такие расходы брало на себя государство. Вот и думай, что лучше, социализм, или капитализм, общество созидателей, или общество потребления? Сейчас, когда уже оброс собственными "средствами производства", когда уже четверть века не получаю зарплату, а получаю доход, вроде социализм не сильно привлекает. Но когда задумываешься о дальнейшей перспективе...
I was hoping you would lap the valves because the last engine you did that it helped it run so much better and the valve seat probably aren’t sealed well.
Занимательное и залипательно видео. Лучше собирать такие двигатели из новых деталей, чем ремонтировать убитый движок от ЗиЛ 130. Ни пупок не надорвёшь, ни геморрой не заработаешь, да и тали/лебёдки/домкраты/динамометрические ключи не нужны. Даже сборочный стол со стапелем не нужен! 👍 Класс!
@@Valentin_I Так такое не для уехать. Это для души. Не всё в этом мире измеряется полезностью. Точнее, есть такое понятие - хобби. Оно бывает не практичным в материальном плане, но очень нужным (и следовательно полезным) в духовном. Этот моторчик именно для души, а не для выгоды. А для ребёнка, вовремя познакомленного с ним, это может стать двигателем, на котором чадо сможет неплохо "поехать" по жизни. Так что, "всё относительно"!
Everyone thinks working with multi-ton parts is hard but after a lifetime of machine work I can tell you the small parts are the real challenge. I am amazed at the level of detail in this assembly. Very seriously impressed, this is watch maker level precision.
Repent to Jesus Christ “You also must be ready, because the Son of Man will come at an hour when you do not expect him.””
Luke 12:40 NIV
J
I think working with the heavy parts is hard, but I definitely agree that working with smaller parts presents its own unique set of challenges. It's much easier to get a grip on a tie rod than it is a tiny screw. Especially when your old like me and your eyes and fingers don't want to work like they used to.😁
Side valve engine
Yup
Yea and i looked it up. Its cool but i dont have $1,500 for one 😂 . It is awesome though !
Engines are normal sized he's just a Giant
I can get on board with that theory 🤔🤣
@@Matty.Hill_87 yeah have a nice day M8
@@Javierblaszczyk you to mate
Engines are giant sized and he's a giant
@@JeebuzCrist maybe
I love how, because of the last video on mini engine building where a ton of people were questioning your timing of the cams, you show the TDC/timing marks/process on this one. :D
I'm thinking the poor exceleration is due to the timing being 12* Before TDC (top dead center), not 12* BELOW TDC, and work up from there, like it should be......
There's no below TDC. You are timing on degrees of rotation before TDC. He is correct.
@@wigs1098 Yeah, I was so puzzled at this comment I just ignored it. Lol
@@wigs1098 Either way, it still sounded like a timing issue whether it was retarded too much and needed to be advanced or visa-versa. I'm guessing one or two degrees different would have resolved it.
But then a leaking front seal and by the look of the smoke, either the rear main seal or head gasket was starting to go too.
Some of the parts weren't machined all that well too which made me wonder about the overall quality of the system although it is still very cool.
👍#300💯💯💯
Didn't even know there was working mini model engines. Awesome work.
Search for toyan engines you will fing some pretty cool stuff: v8, rotaries (including a 2 rotor one), inline 4rs, 2 cylinders, single cylinders and even a supercharger for the toyan v8 with that awesome whine
@user-wx2bk8is4s now I want to see some put this on a rc car.
ikr? it just tickles my brain watching it get put together
this was designed to be used in an rc car
@@joeyginise6051 there are videos on yt where people use those engines on RC cars, worth checking them out.
В детстве лет 20 назад мечтал что в игрушечных машинках будет такой настоящий двигатель в миниатюре🙂
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Wow an actual miniature version of a real engine! All the other ones I've seen are not in my opinion because they are not fired with a spark plug and do not have an oil system. This engine is way cool!
But not a the correct design level 😉
You should see the Ford style V8s that runs
Yeah, some are just models, not actual engines. This certainly is cool.
@@mattcast8761 yeah, it's not even the right color
@@rusty383 and also Ferrari 312PB scale model. Years of of hardwork put into it. Amazing dedication.
I find it absolutely delightful that this engine actually uses spark ignition instead of glow plug ignition.
an actual oil system is still the best part cuz every other model engine is just pumped full of grease
Yep , and oiling system and liquid cooled. Pretty neat
Are you really sure of what glow plugs are used for?
@@77funtomas Yeah diesels use them but many of the old school Cox motors for rc planes and cars used a glow plug , not a spark ignition… I think that’s what he’s talking about
@@77funtomas I honestly can't figure out what the purpose of your comment was.
Никогда не ремонтировал двигатели!За несколько минут понял как устроен!Большая вам благодарность!
This seems like an incredible way to teach young children/ novices or even just people who want to learn the basics of engine mechanics. I mean if you can understand how this works you’ll be less likely to get ripped off by a dodgy mechanic 😂
Still they are still ridiculously expensive, so I'd stick to a motorcycle engine, or a lawn mower engine
1:02
I'm way more impressed with this than I thought I would be.
me too
Don consigo uno
Ditto
and then there were 4!
@Repent and believe in Jesus Christ you need to keep your remarks in your home and in your church. You are the one who blindly believes in virgin birth and coming back to life after death. You are the one who talks to an invisible friend. Virgin birth is a lie and all of Christianity is based on this lie. You and those like you want to take all the advantages of modern science and live a good life while you're trying to drag us all back 2000 years with superstitious nonsense. So shut it up.
A wonderful video! No stupid music, just step by step assembly of the engine. Thank you!
The I interesting thing about the flathead is that it runs. Nobody should kid themselves that it runs well, or is fuel efficient.
Beautifully made model, though... no getting away from that!
The description of this engine on the Sterlingkit website is just too funny!
Love it so much these little engines are so cool
Hayır o motor devasa
This knocks the spots of these Toyan engines imo, the wet sump, the plugs etc make it a real 4 stroke.
I’d like to see this one in an RC car, being a side valve engine, a body to suit the era of when that engine was in production (1940’s 1950’s) style bodywork..
It’s a shame there’s such a limited run on them, I should imagine that they’d be snapped up!
It is a nice engine, but at over $1000 it ought to be.
Imagine a 1950 scale size ford 8n tractor with this bad boy. Would be a cool rc car.
I would buy one
A pietenpol aircamper used a model A engine, I reckon it'd be cool to see it spinning a propeller on a scale model of one. I too was disappointed when I saw that it's only a run of 100.
The product quality of these engines is atrocious. I wouldn't put such a low quality engine in anything, not even an rc car.
These videos really helped understanding how engines work. Aside from that they're just really cool, keep it up!
Deceptive editing techniques were used to hide the process of adding several tiny hamsters into the block. If you slow down the video by about 400%, you can hear their faint squeaks.
@@Tofupancho lmao!
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
You probably get quite a bit better behaviour setting the ignition timing to 28 degrees BTDC.
This finally looks like an engine that is designed with doing serious runtime in mind, Like the centrifugal cooling pump and the geared oil pump.... Hate the fact that they are belt-driven: No oil pressure alarm, no cooling water temperature alarm, so a snapped belt will lead to near immediate selfdestruction.
Solution: place a motion detector on either one of the pumps, that shuts down ignition if no RPM is detected. That will with 100% certainty be an engine saver, because those belts ARE going to snap...
The valve adjusters also are most likely going to lead to trouble, and to remove them, the head needs to come off or there is not enough clearance to move the valves.
Probably run better with more advance but I bet it becomes hard to start with 28 degrees static advance.
@@ferrumignis Depends on whether the ignition has an automatic advance curve or not, I guess.
timing is based on bore size so that's way too much timing
@@redneckasmr-xd1gg I can assure you that that is absolutely UNtrue... I run several small gassers (< 3/4" bore) and they all time out optimal at 28 deg BTDS. That is, setting the timing with a full bore running engine and a tach...
This is just a shitty quality engine overall. Gears suck, etc.... too many cut corners, too low of a build quality, I wouldn't have bothered buying this, much less waste the time putting such a poorly manufactured engine together. Total waste.
A lot like the motor in my 8N tractor,just
a little smaller!
Dig those mini spark plugs!
I was fixing to say, look at that little 8N engine
@@ampatriot same
Впервые узнал и увидел...это просто Класс!
Удивительно то,что всё миниатюрное..маленькое,а главное что этот двигатель..работает!
Спасибо за увиденное чудо!
Успехов Вам и здоровья!
Not gonna lie! This thing had the best idle I have heard in a while! It was running bad, I hope you tune it out and show final results!
Great video as always Johnny!!
my old sailboat has the grown up version of this, they called it an Atomic 4! what a great engine design, 62 years later and still runs like it should.
It's actually a 1928 Ford A Model....................94 years old!
A wet liner, wet sump, sidevalve engine. Brilliant.
Lap the valves, fix the front seal and a bit of carb work and it should be a winner.
I'm wondering if it has a crank case breather
@@jasonGreenVw I hope so, it’s much closer to a modern ICE than the others we’ve seen. CCV is definitely needed here.
@@jasonGreenVw yes you can see it comes off the lifter cover
I loved building models as a kid but never in my wildest dreams would I have done that one if they even existed 50 years ago. Very cool!!
Actually I looked at the prices and even if they did exist my parents would never have bought me one!
You should please the kid you used to be and buy this motor ( or another ) as soon as possible .
Even if it costs three grand and he just changed his hobby halfway through the last one just like the last 20?
Maybe to help him pay for it or have him do some work that he can get paid for. You don’t always just buy your kids whatever they want just because they want it. Usually you can pick out the one child kid that always got what he wanted no matter how expensive it was. I don’t think I even have to tell you that it’s good for kids to work towards something nice.
This is something that EVERYBODY must experience in school, university, as a personal hobby, collectionist or educator.
This is top learning with a 'toy' that IS NOT a toy. This gives a clean idea what technology is. I could simply assemble it and have it as a decoration piece that is dismountable or make it WORK as a classical engine.
I can't explain how important this is. Schools must provide these experiences, with lego, THIS, block bending, block motors from lego and all other things. Learning should be FUN again.
Yeah, make learning FUN agan. :3
Such phenomenal toys we have today. When I was a kid I got to play with dirt, bicycle was used for getting to school and back. We used to throw a trash can lid like a frisbee before the frisbee was invented. Built a go-cart, couldn't afford a gasoline engine so we used a electric bench grinder motor. Worked great until the extension cord ran out of range. We only dreamed of stuff like this.
Better than an XBox. Kids need to learn stuff
Yeah but this is 1000 bucks, 2000 if you get the whole package…
@@19099090 Buy a car at that price. 😭😭😭
You were lucky to have dirt to play with- I got piece of string for Xmas
Bet you wish you would have thought about that trashcan lid toy a little more. ;)
I love these mini engines! I think they're so cool!
My Dad would of loved this. He was into anything mechanical, especially engines. Thanks for uploading this!
*would HAVE
@@moshesheckel7369 Slang used.
This is the best thing TH-cam algorithm has ever ever put as a suggestion for me. Thank you!!!!!!! On my way to buy a kit right now!!!
Lo felicito mientras más pequeño más difícil y más grande más fácil aparte de la tecnología qué belleza
It really looks like your coolant stopped flowing and was boiling in the engine toward the end there. That pump might not be spinning fast enough/got airlocked at some point.
Should definitely make some clear covers for the side of the block so you can see the crank and valve springs :)
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
@@dove3853 And Jesus also gave us V8 POWER! 💪
I love that it uses crankcase oil instead of premix and actual spark plugs!
Yes! He is ! You should see the real V8s and Power model 3/4 scale Beautiful Car.
Jesus is Alive!....Rabbi Tovia Singer is Alive. So is HaShem.
Just by watching this video and a couple of your other videos, I can now certify myself as a mechanic.
Hi please where can I get the mini engine to buy
Hi please send me the address where I can get the mini engine to buy
The alignment and balance of the front pulleys is amazing.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Great video brother. This engine looks impressive apart from the leaks. The brushed starter motor always is a problem.
brushed? why should that be a problem? have you ever opened a real starter?
Interesting the differences between this and the Toyan engines, I wonder why they went with a flathead design? Normally flatheads aren't stellar for power or efficiency, but it probably will run for a very long time! I really appreciate that this has actual spark plugs and ignition system, as well as an oil system, pretty cool! I hope you can get it running proper. Looks like there might be some design improvements to be made.
Simplicity and manufacturing cost I suspect. OHV adds significant complexity.
they make all kinds, this is just one engine they make.
This little beast sounds 100 times better than my single cylinder bike!
Even tho the engine runs bad, its still fun and satisfying to watch this works, i'm so happy to watch this video today
I think putting together this miniature would make me feel like I could conquer an actual size one.
Not a whole lot of difference... 🤷🏻
@@davelowets
Well..... Torque specs and if the miniature doesn't work.... Oh well. If the real thing doesn't work..... Oh crap!
@@jimboreaddabible777 True, true... 🍻
What is the use this
@@vigneshwaranvignesh4942 Because he can...
I would just like to mention, great build, but because you have set the spark plugs to 15* before tdc, the engine has low rpm and misfires, as you can see from the exhaust, flat head engines are meant to have around 4*-10* before tdc. But still, great build.
Love these mini engines so much. So cool to see these tiny parts run. 😍
i love it video this
soone who does not get complex instructions like..At all, tNice tutorials was simple and clear for to understand. Thanks dude.
Perfect engine! Now get the car and the action figure 😁
Would this be a viable engine swap for my miata? I have a feeling it might be too big.
Too small for a Miata but perfect for a Civic.
Hah? Hah?
I'm not an engine person at all, but this is pretty freaking awesome!
I have only one word to describe this, WOW! My first time here and I’m blown away and have enjoyed watching this short more than I could imagine. Keep up the great work.
what a engineering bro!!
The video is for just 15 minutes bt your hardworking is hidden!
Lots of love from Bangladesh. ❤️❤️
Actually works.. Just disable the real time protection in Setting. Wasnt sure that it would work .Awesome bruh..
Simplesmente linda obra de arte
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
Ever thought about making a mini muffler/fart can and exhaust system to make one of these sound different? Sounds like an open header 4 cylinder but if you threw some small scale back pressure with a longer exhaust at it would it sound like a legendary 4 cylinder engine? Could probably even make a tiny bov for the boosted ones.
Why go through all that effort to make it sound like shit?
@@rubiconnn Your opinion is stupid and worthless.
That is probably the coolest thing I’ve ever seen and now I want one. I also wonder if they make them in diesels 😯
Tudo da par ver que não e tão difícil amontar um motor mais difícil e sempre conserva ele em dias Excelente trabalho 🎸🎸🎸 Brasil BR
It is so helpful and educational how components of an engine assembled in a very vivid way
Another great tiny engine build Johnny could you make a pulley and bracket for a DC generator or an alternator to power the engine so it's not entirely relying on the battery to keep running?
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
@@dove3853 bruh
These engines look so satisfying to build, might have to get one
you can buy real car engines for less than these kits lol
Супер! Молодцы! Отличная вещь!
That is one of the best sounding miniature engine I’ve ever heard. !
Such a shame only a 100 was made of these. These are such amazing motors!
Impressed by the fact it uses metal or "real" piston rings, not to mention two of them per piston. Ive seen some of these small engines that use an oring for a piston ring...heck nitro rc engines, which is what I have a few years of experience with, don't even have piston rings of any kind
Some have rings and some don't. Depending on the type of nitro R/C engine.
The engineering of these mini kits is incredible...👍👍👍
I'd like to see more builds for or with these engines (like the cars or mini chainsaws, or perhaps a mini supercharger would be cool).
Anyone notice how normal sized the parts look until his hands are in the way? Pressing the wrist pins got me. Great video. Loved every second.
Pretty cool! I have almost the same real engines in my 1948 Willys CJ2A and my 1952 Ford 8N tractor. Good to know even a brand new flat head 4 banger will pop at idle...lol.
Hey Johnny,
Hadn't seen you for a few weeks, perhaps.
Good to see another miniature engine coming together. But I wanted to ask,
is that brand Cison any good? Unless lapping the valves isn't an option, it was
sounding kind of rough.
Anyhow, good to see you back. 🏎
Any good? Leaking from front seal, starter motor dead, engine runs rough.... sounds like crap to me!
Too cool! I love it. I did assembling a plastic model back in the 80 but this one is one the best.
I had one too. This beats all!
Puts out 103 mousepower
Lol
Me quito el sombrero. Es un Genio es Digno de Almiracion
As somebody who played the Car Mechanic Simulator games far too much I feel like at home watching those videos.
Such an awesome piece! Love the content, keep it up!!!
Yo i like how the bearings are kept from spinning in place, theoretically, by some sort of hardware. Im sure some ungodly amount of torque can get them to spin but this will help prevent that. 🤘🏽✌🏽👍🏽 awesome vid as always
The bearings in EVERY other engine are held in place also. 😴
@@davelowets with hardware directly on the bearing? Maybe hard wear holding a bracket that holds the bearing, but im talking about a bolt in direct contact to the casing of the bearing itself like in this engine in this video. Yea some engines do have that but not every engine.
@@tomaslongoria2449 I'm not a big fan of screwing the end of a fastener into the side of a bearing race to hold it in place. The race of the bearing can easily be crushed out of round by a fastener that's a touch too long, or by too much torque on the fastener. I prefer the normal way with split bearing shells with tangs on them to keep them from spinning in tje housing.
Mad respect for your manual dexterity!
This is so impressive. It's like the Rolex of mini engines. I enjoyed this very much.
TNice tutorials is just the pick up I needed, thanks man
That "carburetor" is pretty sketchy. Probably the rough running problem.
Also isn't there supposed to be a break in for the cam and lifters? ie 2000 rpm for 15 mins or something.
Not to mention there's no way to adjust the timing
Honestly a cam break in on an engine this small that's essentially an ornament really isnt gonna be that big of a deal. Also the breaking in which really only matters for flat tappet cams, is varying high RPM for 20 odd minutes, you don't want to lug them or have it sit at one RPM.
Verdaderamente INCREÍBLE. Felicidades 👏 👏 👏
Awesome content! Your videos are always so pleasant to watch! 😀
When assembling this engines, you think you could, somehow, make the way the fluids and gases flow through the engine clearer? 😁😁😁
Although you said it runs bad, I loved the sound and the look of the engine. Thanks for showing it!
Vraiment passionnant la micro mécanique
Finally an engine with its own oil !!! I’ve waited ages to see this!!!
Интересно на что ставятся такие миниатюрные двигатели?
на полку)
Hardest part of the whole project? Paying for it
1199 with everything is crazy
Very nice, very impressed by your editing and the beauty of the engine.
I was amazed. miniature like this is so rare. Thanks for sharing this.
These tiny engines always suprise me with their build! And so do you!
That is a cool engine kit. Is that for display purposes or is there an actual application for it's use?
Reroute the exhaust up, and put clear parts on the lifter and crank doors. Also this engines looks like it needs a turbo or a super charger.😎
love the Assembly videos, is it running on "normal" gas?
Yes, and I used 95 octane.
@@johnnyq90 how much do these engines cost and where can I buy one ?
Should I review this for the company, too? Wow! This is an amazing engine! I have two that power the house!
Τι μπορεί να κάνει ο άνθρωπος που έχει τέτοιο μυαλό και μας κάνει πιο δημιουργικους
Вот это "игрушка" для взрослых дядинек ! Прекрасное исполнение исходных комплектующих . И какая сборка ! Мастер ! Отличная лабораторная работа для обучения двигателистов в колледже !
Да такие вещи надо в детском мире продавать по доступным ценам, и папаши вместе с сыновьями будут собирать... А как обучающий комплект в ПТУ или технарь, вообще незаменимая вещь... Но габариты должны быть уже другими.. PS. Себе бы такой купил... За приемлемые деньги... Но увы и ах.. Стоит наверно как чугунный мост в Москве...
@@ВладимирБир-ж9к Да , цена наверно кусается Это фактически малый двигатель , Для папы и сына после 13 лет . В каком сейчас классе изучают устройство ДВС ? Наверно проще будет семьей перебрать двигатель от Оки - по цене .
Беда в том, что заставить чадо ковыряться в старом, грязном, б/у двигателе Оки, большая проблема. А здесь всё новенькое, чистенькое и маленькое. Таким заинтриговать проще.
Р.S. Имхается мне, что такое наши чинайские братья делают. Особенно учитывая неровную работу продемонстрированного экземпляра. 😂 Похоже, не только опережение зажигания не на месте, но и фазы газораспределения сдвинуты. Кстати, приличный шелест при прокручивании вала на сухую, говорит о том, что детали парами не обрабатывали. Такое прикатывать и прикатывать, и не факт, что прикатаешь.
@@АлимСадыков-и5в Продолжая опасения скажу ,что только технически продвинутый папа сможет устранить все недочеты (недоделки) указанными Вами . В результате - выброшенные деньги и надолго испорченное настроение . Наверно лучшее - такие наборы собирать как в старые времена - в кружках , Домах юных техников и т.п. И опять все это упрется в деньги .
@@vladimirgarbuzyuk8408 Увы, но сейчас ВСЁ упирается в деньги! А ведь были времена, когда такие расходы брало на себя государство. Вот и думай, что лучше, социализм, или капитализм, общество созидателей, или общество потребления? Сейчас, когда уже оброс собственными "средствами производства", когда уже четверть века не получаю зарплату, а получаю доход, вроде социализм не сильно привлекает. Но когда задумываешься о дальнейшей перспективе...
I think the biggest (internal) problem has to be the really poor quality rings, but i'd also check the cam to see if it's cut right.
Love how he didn't explain anything ❤😍
Wow i never knew this was a real thing? I'm sold!
I really enjoy watching i'm now on my basic training as a mechanic very nice one I can say
Love that engine, I want one
Good
@@rizkiokta5634what good? Stfu man
Где такой купить
Yo that thing costs $1000 who in the world would buy that (aside from TH-camrs cuz obviously they make money off of it
Exactly! When I saw that the 50cc V12 costs $3.800 it was WTF?! In that price I would by a normal size engine not small crap like this one...
bro for 3.8k you can get a mini truck from japan 😂
If I had $1000 dollars lying around I so would
This has to be the coolest thing ever.
one of the cutest things I've ever seen
I was hoping you would lap the valves because the last engine you did that it helped it run so much better and the valve seat probably aren’t sealed well.
Занимательное и залипательно видео. Лучше собирать такие двигатели из новых деталей, чем ремонтировать убитый движок от ЗиЛ 130. Ни пупок не надорвёшь, ни геморрой не заработаешь, да и тали/лебёдки/домкраты/динамометрические ключи не нужны. Даже сборочный стол со стапелем не нужен!
👍 Класс!
Далеко уедешь на игрушечном движке?
@@Valentin_I Так такое не для уехать. Это для души. Не всё в этом мире измеряется полезностью. Точнее, есть такое понятие - хобби. Оно бывает не практичным в материальном плане, но очень нужным (и следовательно полезным) в духовном.
Этот моторчик именно для души, а не для выгоды. А для ребёнка, вовремя познакомленного с ним, это может стать двигателем, на котором чадо сможет неплохо "поехать" по жизни.
Так что, "всё относительно"!
@@АлимСадыков-и5в Точно сказано!
😂😂😂😂 ¡ bravo! Con esta demostración de motor en miniatura una misma arregla su carro👌🥰🤝🙋🏾♀️🇵🇦🇵🇦🇵🇦