You guys are killing it on the support across the social media platforms lately. I truly appreciate it! I never announced that I have a TikTok on TH-cam, but it is also @ ShopLifeTV. The only social media platforms I have are: TikTok (ShopLifeTV), Instagram (ShopLifeTV), and TH-cam so don't get scammed into thinking its me somewhere else lol (yes there have been imposters on forums and other platforms).
Hi m8. I have an 04 manual M3 and it developed a slight idle knocking noise on startup only. Sent you a message and the video on Instagram. Can you have a look if you can please? Thanks in advance and keep up the good work. Helped me a ton working on my E46s
@@christophercilia9214 Hey! I get tons of messages for diagnostic help so I only do diagnostic help through my website at www.shoplifetv.com . Depending on the knocking noise, it can be vanos, valve adjustment, rod bearings, pulley, or exhaust related. Your best option will be to start diagnosing one item at a time to track down the location of the noise (mechanics stethoscope or long screwdriver).
I agree. Fixing up this car isn't a bad idea since most of what's being done to it can be swapped to a better chassis. I actually like buying donor cars to use as parts cars so I can tear the car apart, prep all the parts I need to, then buy the car I want and swap everything over to it pretty seamlessly. Also, general advice to men. Don't get married. There's no benefit to men when it comes to marriage! There is such a low probability you won't have your life destroyed. Sorry. Had to say that, but it's true. Lol
I always get my flywheels resurfaced here in San Diego at Southland Clutch, for DMFW they charge $85, I use a 3 jaw bearing puller, a large socket and the throw out bearing to reset the pressure plate, and I always save the "throwing star" looking plates the clutches come with with the 14mm hex in the middle(I think it's a 14) and put it back, as good as new.
I would suggest recommending to the customer to invest a bit of extra money and get a manual transmission wiring harness. This way all the SMG wiring will be eliminated. I did that on my 330 when I swapped it. Cleans up all the clutter
And true point it's seems really not that bad when you buy a part or two but once all the parts a unit gets expensive and quickly .. specially if u love the car and are paying to do it the right way.. I've spent 3500 on my e46 this year just on needed maintenance and didn't even get it drivable until the month if November.. so it costed a ton and I lost the whole season of driving where I live ..
Love all the videos great description on the task. You make the work look easy thanks for all your information keep them coming. Bro I want working with you
Jason, my e46 2003 is losing coolant, I have put on new coolant reservoir, pump is good and thermostat is okay..still it is losing 100ml every 3 or 4 days..mechanics are clueless they have done pressure testing n found zero leak. What could be another reason??any idea?
So what does the flywheel size have to do with how the transmission works? When I did my swap on my e36 328 I could only get a getrag from a 325. So when I ordered the flywheel,clutch and PP I ordered based off the 325 vin on the transmission(I didn't know and couldn't get a answer) rather than my 328's vin. Now I've got a zf to go in(my getrag grinds 5th) there and I don't know what to do. My whole set-up is less than a year old. The flywheels are the same diameter,but the one for the 328(zf) is a different thickness than the 325(getrag)that I have put in. But then I wondered if I would use a single mass fw, wouldn't it be a different thickness then the oem dual mass. So what does the thickness of the 2 dual mass flywheels have to do with how the 2 different transmissions operate? Can I use the brand new dual mass from the getrag for the zf?
For non m E46, only replica M3 front bumpers will fit (made for non-m) unless you have m3 front fenders installed. I am pretty sure most places are backordered on the rep bumpers for non-m's but you can check ModBargains, eBay, Ecs Tuning
When you finish the car, PLEASE PLEASE Post how much it cost TOTAL. I watched the video where you got the car, and how much you estimated on it. But I want to know how much it ACTUALLY cost to do all the repairs AFTER you're done with it.
I strongly advise to consider this as an estimate ONLY. I realize there are viewers all over the world. Lots of variances here. Different countries may have added taxes, fees, tariffs, customs duties, etc. Nothing like having a viewer irate that their cost is thousands of dollars MORE due to fees and added costs that didn't apply to Jason.
hie , i have been following you.may you assist i have a 2000 bmw e46 318i m43 auto.i changed the engine an d i put the bmw e36 318i sohc engine .i also put the engine wiring harness for the bmw e36 engine and the ecu. are you able to assist me as to how i go with connections .im based in South Africa
That exactly right there is why you don’t buy a used m off an auction, always unexpected things you don’t even know about, better off finding a good one in person then making an offer
You guys are killing it on the support across the social media platforms lately. I truly appreciate it! I never announced that I have a TikTok on TH-cam, but it is also @ ShopLifeTV. The only social media platforms I have are: TikTok (ShopLifeTV), Instagram (ShopLifeTV), and TH-cam so don't get scammed into thinking its me somewhere else lol (yes there have been imposters on forums and other platforms).
Hi m8. I have an 04 manual M3 and it developed a slight idle knocking noise on startup only. Sent you a message and the video on Instagram. Can you have a look if you can please? Thanks in advance and keep up the good work. Helped me a ton working on my E46s
@@christophercilia9214 Hey! I get tons of messages for diagnostic help so I only do diagnostic help through my website at www.shoplifetv.com . Depending on the knocking noise, it can be vanos, valve adjustment, rod bearings, pulley, or exhaust related. Your best option will be to start diagnosing one item at a time to track down the location of the noise (mechanics stethoscope or long screwdriver).
@@ShopLifeTV great advice Chris try your best to pin down the area of the problem.
come back to la !
His “not that expensive” is expensive asf for mee🤧😂😂
Yeah...the flywheel comment... lol
Was just about to have dinner and now i see your upload, perfect timing
Lol I love watching videos while eating as well!
South Africa 🇿🇦 in the house ...
YAY SOUTH AFRICA!
I agree. Fixing up this car isn't a bad idea since most of what's being done to it can be swapped to a better chassis.
I actually like buying donor cars to use as parts cars so I can tear the car apart, prep all the parts I need to, then buy the car I want and swap everything over to it pretty seamlessly.
Also, general advice to men. Don't get married. There's no benefit to men when it comes to marriage! There is such a low probability you won't have your life destroyed.
Sorry. Had to say that, but it's true. Lol
Agreed!!!
I always get my flywheels resurfaced here in San Diego at Southland Clutch, for DMFW they charge $85, I use a 3 jaw bearing puller, a large socket and the throw out bearing to reset the pressure plate, and I always save the "throwing star" looking plates the clutches come with with the 14mm hex in the middle(I think it's a 14) and put it back, as good as new.
S54 meister! I’m really digging this series. Way to go guys!
I would suggest recommending to the customer to invest a bit of extra money and get a manual transmission wiring harness. This way all the SMG wiring will be eliminated. I did that on my 330 when I swapped it. Cleans up all the clutter
what trans does
that come with
Did you swap from ssg to manual 330 ? If yes what are the steps done .
Love all the videos great description on the task. You make the work look easy thanks for all your information keep them coming.
Thanks Cruz!
And true point it's seems really not that bad when you buy a part or two but once all the parts a unit gets expensive and quickly .. specially if u love the car and are paying to do it the right way.. I've spent 3500 on my e46 this year just on needed maintenance and didn't even get it drivable until the month if November.. so it costed a ton and I lost the whole season of driving where I live ..
haha you sing the song of our people. e46 life.
Literally my dream car watching all ur vids so one day I get one
“One thing I’m noticing it’s wet in here”
“It’s so moist”LOL
Lmao
Love all the videos great description on the task. You make the work look easy thanks for all your information keep them coming. Bro I want working with you
Hope you do a video on that tail panel replacement there isn’t one anywhere on the internet!
Please perform a DIY on a CSL airbox.
10:32 Ah, the timeless accessory belt trick on a date. "The belt is broken, I can fix it only with your pantyhose ."
Loving this M3 stuff 👍
Lots more to come!! Thanks!
@@ShopLifeTV I wish you were UK based Jason, then you could work on mine !
Major bmw lover and fan of the channel can't wait to watching the Copart m3 Come together .. I just did all this on my CI but my car is manual not smg
Thanks for sharing guys. Dutch regards, Nico.
Yooo uk in the building love the vids
WOO UK!
I got an 05 325i sitting here
Great videos bro 😎
When r u gonna do dct swap seen some people running f80 dct with s54 m54 motors 👌
amazing bro great content az allways and great work love the channel
Appreciate you Kian!
If you replace the the clamps, always make sure that it isn't getting in the way of any moving parts
Love the videos! Great job!
I see why a few do a S65 or even S85 dry dump with DCT conversion.
That bottom hose on my non SMG was such a pain in the ass probably what took me the longest
Hey I been getting high revs btween 2500 and 3000 rpm on my E46 smg..Can you tell me what that means? thank you
Need some lubricant on the rubber !
Jason, my e46 2003 is losing coolant, I have put on new coolant reservoir, pump is good and thermostat is okay..still it is losing 100ml every 3 or 4 days..mechanics are clueless they have done pressure testing n found zero leak. What could be another reason??any idea?
So what does the flywheel size have to do with how the transmission works? When I did my swap on my e36 328 I could only get a getrag from a 325. So when I ordered the flywheel,clutch and PP I ordered based off the 325 vin on the transmission(I didn't know and couldn't get a answer) rather than my 328's vin. Now I've got a zf to go in(my getrag grinds 5th) there and I don't know what to do. My whole set-up is less than a year old. The flywheels are the same diameter,but the one for the 328(zf) is a different thickness than the 325(getrag)that I have put in. But then I wondered if I would use a single mass fw, wouldn't it be a different thickness then the oem dual mass. So what does the thickness of the 2 dual mass flywheels have to do with how the 2 different transmissions operate? Can I use the brand new dual mass from the getrag for the zf?
I need a E46 M3 front bumper rep or not for non m E46 Atlanta based
For non m E46, only replica M3 front bumpers will fit (made for non-m) unless you have m3 front fenders installed. I am pretty sure most places are backordered on the rep bumpers for non-m's but you can check ModBargains, eBay, Ecs Tuning
I’m selling an Alpine white e46 m3 front bumper, but in Texas.
@@tommytenzo willing to ship or meet would be great
Update on the e36?
Its going to need a whole video for an update...its a bad one
Those alloys are nice. What are they?
When you finish the car, PLEASE PLEASE Post how much it cost TOTAL. I watched the video where you got the car, and how much you estimated on it. But I want to know how much it ACTUALLY cost to do all the repairs AFTER you're done with it.
I strongly advise to consider this as an estimate ONLY. I realize there are viewers all over the world. Lots of variances here. Different countries may have added taxes, fees, tariffs, customs duties, etc. Nothing like having a viewer irate that their cost is thousands of dollars MORE due to fees and added costs that didn't apply to Jason.
hie , i have been following you.may you assist i have a 2000 bmw e46 318i m43 auto.i changed the engine an d i put the bmw e36 318i sohc engine .i also put the engine wiring harness for the bmw e36 engine and the ecu. are you able to assist me as to how i go with connections .im based in South Africa
wedding in CA or in india?
That exactly right there is why you don’t buy a used m off an auction, always unexpected things you don’t even know about, better off finding a good one in person then making an offer
Do I have to change the sump on an S54 engine for it to work in an X3?
Are you doing an S54 X3? Obviously a 6 speed, how are you foing to get the AWD clutch to engage?
👍🏿
How mad is it that there's basically enough space in the engine bay for another i6 when you remove the airbox 🤣
Why S65 fits easily and S85 fits when converted to dry sump.