How To Remove & Install Alternator 2003-2007 Honda Accord | DIY Auto Repair By Young Mechanic Aiman

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ก.ค. 2018
  • In this video young mechanic Aiman will share with you ways on how to remove and install alternator on a 2003 Honda Accord 2.4L engine. The process should be the same for all Honda models DX LX EX especially Accord years 2004, 2005, 2006 and 2007.
    In summary, the steps are as follows:
    Disconnect negative battery cable.
    Remove drive belt.
    Remove alternator connector and main power wire (10mm)
    Remove three bolts securing alternator to the engine block.
    Remove alternator from car through the power steering hose and AC line.
    Installation is opposite of removal.
    Although there are many auto repair tutorial videos out there, some of which are done by professional mechanics, young Aiman, an aspiring mechanical engineer, hopes that his step-by-steps / instructions on how to remove / install aternator on Honda Accord vehicles would be entertaining and useful to other DIY persons who are interested in repairing their own cars.
    How your car’s alternator works:
    The alternator, which is located on the engine, provides power to the battery and continuously charges the battery and the car’s electrical systems and computers. Its primary job is to keep the electrical system up and running in place of the battery. The battery’s job is to start the car, and the alternator keeps it running.
    Signs your alternator is failing:
    In some cases, when an alternator is about to die, there are a few warning signs.
    Identifying what those signs are can signal you to have it checked by a mechanic, which can save you from being stranded on the road.
    One of the most common signs of a faltering alternator is when the headlights start pulsating at night, from dim to bright.
    Some alternators may stop working if they are charging several electronics at once.
    Other signs may include an electrical burning smell coming from the alternator, or the battery, the alternator warning light or other dashboard warning lights turning on.
    A struggling alternator may also cause your car radio or other electrical components to work intermittently, or cause a squealing noise in your car’s engine.
    This video is presented to you by young mechanic Aiman-Imran Zulhilmi Anuar. Please be sure to watch other DIY auto repair videos on Aiman's EyeOnAiman youtube channel & facebook page.
    Disclaimer of Liability (No Responsibility): Please exercise due diligence with information obtained from this video. The information contained in this video is for entertainment purposes and should only be treated as such. I shall not be held liable for any damage to vehicles, tools, equipment or person resulted therein. This channel assumes no liability for property damage or injury incurred. You will use such information at your own risk. Aiman recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Any injury, damage or loss resulted from using information in this video is the sole responsibility of the user and not EyeOnAiman.
    Recording Date: July 18, 2018
    Video URL: • How To Remove & Instal...
  • ยานยนต์และพาหนะ

ความคิดเห็น • 45

  • @pnum9618
    @pnum9618 ปีที่แล้ว +16

    im 62 listening to a 12 yr old telling me how to fix my car unbelievable times we live in thank you young man you have a very bright future ahead of u

  • @ostaxavellidavelli
    @ostaxavellidavelli ปีที่แล้ว +2

    Seein a young king doing it give me motivation

  • @josegabriel3593
    @josegabriel3593 4 ปีที่แล้ว +26

    good instructional video, however, you forgot to mention to disconnect battery cables before you start
    and it would nice to see how you put belt back on.

  • @xart23x
    @xart23x 4 ปีที่แล้ว +14

    Great job kid. First step is to NOT be scared to work on cars. Expect struggles and small mistakes. Props for good work.

    • @screwdajuice
      @screwdajuice ปีที่แล้ว

      nah, first step is to disconnect the negative battery cable from the post as you're working on the ALTERNATOR

  • @mariehernandez007
    @mariehernandez007 9 หลายเดือนก่อน

    Just watch the video Aiman. Good job replacing the alternator. Keep your videos coming.Positiive and Informative.

  • @hkhleif992
    @hkhleif992 ปีที่แล้ว +1

    Thank you !!! great video. you made it simple.

  • @lewf5685
    @lewf5685 10 หลายเดือนก่อน

    Heck yeah! Way to go, Aiman! Thanks for the video.

  • @simonvanderlinden9760
    @simonvanderlinden9760 4 ปีที่แล้ว +1

    You are a good Lad you made my repair very easy

  • @scottmartin610
    @scottmartin610 2 ปีที่แล้ว

    You helped me tremendously! Thanks, my problem is fixed and saved me lots of money

  • @QTABT4EVER
    @QTABT4EVER 3 ปีที่แล้ว +1

    Great instructional video thanks

  • @richardfabrizio8998
    @richardfabrizio8998 2 ปีที่แล้ว

    Great demonstration. Very helpful thanks

  • @rickscarpellotherapy
    @rickscarpellotherapy 8 หลายเดือนก่อน

    You're outstanding sir. Thank you for the tips!

  • @gnrsgl
    @gnrsgl 4 ปีที่แล้ว +6

    Just changed mine managed to do it without removing hoses

  • @enriquechavez615
    @enriquechavez615 4 ปีที่แล้ว +2

    Thank you I think i can do my 2005 Honda accord good video you save Me $ 150 appreciate 😁✌

  • @StevenNguyen620
    @StevenNguyen620 2 ปีที่แล้ว +1

    Thank you, Boy!

    • @EyeOnAiman
      @EyeOnAiman  2 ปีที่แล้ว

      You’re welcome! Thank you for watching!

  • @breeciarlo
    @breeciarlo 11 หลายเดือนก่อน

    Thank you!

  • @davepolynice3811
    @davepolynice3811 5 ปีที่แล้ว +1

    Niiicce!!!

  • @georgeemmerich1485
    @georgeemmerich1485 2 ปีที่แล้ว +2

    Take bottom 2 bolts out first and the top bolt will hold alternator in place. Then take top bolt out without having to hold in place alternator to remove bottom bolts

  • @dannyluu8140
    @dannyluu8140 11 หลายเดือนก่อน +1

    Where did you buy that special tool for the pulley to make the belt loose?

    • @EyeOnAiman
      @EyeOnAiman  11 หลายเดือนก่อน

      Best place to buy would be on Amazon, there are several types and variants, here are a couple of them:
      1. amzn.to/3OLueWZ | GEARWRENCH 15 Piece Ratcheting Serpentine Belt Tool Set - 3680D (very popular apparently_
      2. amzn.to/3YnewVt | BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set
      Thanks for watching...

  • @robertruggles2954
    @robertruggles2954 3 ปีที่แล้ว +1

    i like this kid

  • @markamiller1970
    @markamiller1970 8 หลายเดือนก่อน

    Tip: Take a picture of the layout before you remove the parts. That way you can rever back to it.

  • @XxWYZTHIFAxX
    @XxWYZTHIFAxX 4 ปีที่แล้ว +3

    Not bad , he’s like 12 and he getting down 😂💪

  • @brianalmeida6885
    @brianalmeida6885 4 ปีที่แล้ว +6

    Good job but next time list the tools and sizes ur gonna use before u start

    • @EyeOnAiman
      @EyeOnAiman  4 ปีที่แล้ว +2

      Thank you for the suggestion, we will try to incorporate that in future videos, usually we're rushing because we needed the car to be fixed ASAP, but we will try..

  • @synovium
    @synovium 2 ปีที่แล้ว

    it would be nice if you would do this on a v6 engine since it is a different configuration

  • @Coco-qz7fn
    @Coco-qz7fn ปีที่แล้ว

    damn those 2.4 l engines

  • @myshreksbox
    @myshreksbox ปีที่แล้ว

    Watching this so I can install mine myself after my coworker told me she’d have to take off the top part of my engine which I knew was bullshit

  • @craigmorcan8769
    @craigmorcan8769 2 ปีที่แล้ว

    Good video. I've also got to change my power steering pump and starter motor :(. And i have a vsa light coming on. Think I might go back to the Ford's. Love the car but parts are so f$#ken expensive.

  • @case1
    @case1 4 ปีที่แล้ว +1

    What is that extension tool that you used for the tensioner pully?

    • @EyeOnAiman
      @EyeOnAiman  4 ปีที่แล้ว +2

      That's a specialized tool designed specifically for tensioner pully, to remove serpentine belt, you can buy it at Advanced Auto Parts, O'Reilly or Autozone. Not too expensive and very convenient. Ours is Autocraft serpentine belt remover tool

    • @case1
      @case1 4 ปีที่แล้ว +1

      @@EyeOnAiman Thanks for the info. I've been looking for this tool under the wrong name search. Definite want to get one. 👍Great video by the way

  • @ElFory5
    @ElFory5 4 ปีที่แล้ว +1

    I need to remove - negative terminal battery?

  • @tonycarver9570
    @tonycarver9570 2 ปีที่แล้ว

    It's alot easier if you take the 2 bottom bolts out before you remove the top one.

  • @raymundosanchezjr.9532
    @raymundosanchezjr.9532 2 ปีที่แล้ว

    I want to see a 2000 Honda Accord replace alternator

  • @josejavier3718
    @josejavier3718 2 ปีที่แล้ว

    How fixes p 1078 honda crv 02

  • @711encounters
    @711encounters 4 ปีที่แล้ว

    How do you know how to do that being like 9 or 10?

  • @mich9453
    @mich9453 4 ปีที่แล้ว

    Is more easy if you remove the power steering pump

    • @52692luis
      @52692luis 3 ปีที่แล้ว

      Yeah if you have an hour extra to spare

  • @iishyxvietxboyii
    @iishyxvietxboyii 3 ปีที่แล้ว

    How old is this guy?

  • @nigh8t
    @nigh8t 3 ปีที่แล้ว +1

    You're doing too much over top making an easy job hard

  • @paulrodriguez4061
    @paulrodriguez4061 3 ปีที่แล้ว

    Good try kid..just relax and take it easy don't make the video as if it's a presentation just do your thing don't get nervous lol