Improvements could be: 1. Make sure the small propeller at the last is rotating at a constant speed, such that it will nullify the effect of torque of bigger propeller. Hence, body of the helicopter would not be rotating in opposite direction. 2. Problem - The helicopter is not flying upwards, it's going left and right randomly. Solution: a) Both wings of the larger propeller may not be the same in terms of angle, size etc. b) The motor or propeller must be tilted. Meaning, not making an angle of 90 degrees with the body and hence, tilted towards one side, that's causing the helicopter to go to that side the propeller or motor is tilted towards. Make sure, it's aligned at 90°.
You can see that both the propellers are not at a same angle, If you want better results, replace the current propeller with a better, more similar tilting propeller, and the plastic canopy/case made of PVC pipe is garbage, please use a more lighter plastic or fliteboard for the canopy, and design is better
video games have nothing to do with this, helicopters need either a fixed pitch or collective pitch to maintain stability and control. i may play video games but i know my stuff. try this again im sure youll learn from your mistakes@@MKSmartcreations
One improvement - to get the flight more stable could be a flybar (or stabilizer bar) which acts as a gyroscope (alternative: electronic flybarless stabilizing). Samples you could find on some rubberband helicopter. The whole rotor acts there as a pendulum stabilized by a diagonal bar with weights at the end. E.g th-cam.com/video/HUFMMTsmsUE/w-d-xo.html Important: But it would be much more difficult with your powerful motor to get all those things save. If you loose parts from rotor you should not be nearby.
This is great
Improvements could be:
1. Make sure the small propeller at the last is rotating at a constant speed, such that it will nullify the effect of torque of bigger propeller. Hence, body of the helicopter would not be rotating in opposite direction.
2. Problem - The helicopter is not flying upwards, it's going left and right randomly.
Solution:
a) Both wings of the larger propeller may not be the same in terms of angle, size etc.
b) The motor or propeller must be tilted. Meaning, not making an angle of 90 degrees with the body and hence, tilted towards one side, that's causing the helicopter to go to that side the propeller or motor is tilted towards. Make sure, it's aligned at 90°.
Very helpful!
where to learn about the aerodynamics of real helicopters tho?
may u recommend any references to read as on this subject?
Gyro is also missing
Bro you need to balance the weight of the object from every angle then It will be more easier to fly it
You can see that both the propellers are not at a same angle, If you want better results, replace the current propeller with a better, more similar tilting propeller, and the plastic canopy/case made of PVC pipe is garbage, please use a more lighter plastic or fliteboard for the canopy, and design is better
Opopopopopop nice i like this
gyro.. accelerometre.. with arduino lora.. or other.. :) ty
What type of transistor does it use?
what is the model of the transistor???
How much is the resistance???🙏🙏🙏
Nice project bro
Hc-05 module is not great. It disconnects all of a sudden
Good luck Bro
This is a nice project.. can u pls send me the coda?
Please guide ma for the Bluetooth and ardrino promini board connections
What is the battery voltage?
Sir please tell us how the pcb was made by you
You are next alon musk
What !!???
🤝🏻
¿Como le das estabilidad? Si le pudieras incorporar el mecanismo de la cíclica y colectivo todavía puede funcionar bien.
"how I made RC helicopter at home ...." Correction "how I assembled RC helicopter at home ..."
look up how helicopters actual work then make one
Dear, Thanks for the suggestion but I don't play video games
video games have nothing to do with this, helicopters need either a fixed pitch or collective pitch to maintain stability and control. i may play video games but i know my stuff. try this again im sure youll learn from your mistakes@@MKSmartcreations
First
Quantas hélices ja quebrou? 😂
Udu jaaant bhar mehnat kru raat bhar
One improvement - to get the flight more stable could be a flybar (or stabilizer bar) which acts as a gyroscope (alternative: electronic flybarless stabilizing). Samples you could find on some rubberband helicopter. The whole rotor acts there as a pendulum stabilized by a diagonal bar with weights at the end. E.g th-cam.com/video/HUFMMTsmsUE/w-d-xo.html
Important: But it would be much more difficult with your powerful motor to get all those things save. If you loose parts from rotor you should not be nearby.
Sir plz coding for arduino helicopter plz teach me
🤪🤪🤪 it only fly up and down....
Ye kitne kv ka bldc motor he plz bolo na?
hello. i love your video. if it is possible can you send me the code?
Hi i already shown in the video if u can't able to see that code then I will send it
And me too. Please.
supper