MasterClass CNC Machining | One Tool To Rule Them All
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- Expert Level Clinic on How To run the Kennametal Dodeka Mini Shell Mill in Alum, Steel, Stainless, Titanium & Inconel 718. Machine is DOOSAN DNM5700.
BUY THIS TOOL AND 10 INSERTS FOR $249:
titansofcnctooling.com
METRIC SPEEDS & FEEDS 40% FASTER
Aluminum: 1463 SMM - 10668 MMPM
1018 Steel: 548 SMM - 7823 MMPM
316L Stainless: 219 SMM - 2133 MMPM
Titanium: 91 SMM - 939 MMPM
Inconel: 67 SMM - 558 MMPM
0:00 DODEKA MILLING
0:15 BUY THIS TOOL
1:01 THE INSERTS
1:36 6061
2:18 1018
3:02 316L SS
3:53 TITANIUM
5:22 INCONEL 718
6:24 LET'S GO 40% FASTER
7:06 BUY THIS TOOL
7:34 CNCEXPERT
7:47 BARRY SETZER
Help us fund FREE Education by purchasing tools seen in our videos here:
TITANSofCNCTooling.com
FREE CNC Machining Academy:
rebrand.ly/TiAcademy
FREE Aerospace Academy:
rebrand.ly/TiAero
FREE Grinding Academy:
rebrand.ly/TiGRIND
Subscribe for daily content and expert knowledge: rebrand.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
rebrand.ly/TiAcademy
Follow us on Instagram:
rebrand.ly/TiINSTA
Like us on Facebook:
rebrand.ly/TiFACEBOOK
Join the conversation on our Facebook Group:
rebrand.ly/TiFBGroup
Connect with us on LinkedIn:
rebrand.ly/TiLINKEDIN
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - rebrand.ly/TiKennametal
DN Solutions - bit.ly/DoosanTiYT
United Grinding - hubs.ly/Q013zHpC0
Mastercam - rebrand.ly/MastercamEDUTiYT
Blaser Swisslube - rebrand.ly/TiBlaser
Solidworks - rebrand.ly/TiSLDWRKS20
Trumpf - rebrand.ly/TiTRUMPF2022
Trumpf TruMark - rebrand.ly/TiTRUMPFTruMark
Trumpf TruPrint - rebrand.ly/TiTruPrint
Markforged - rebrand.ly/TITAN-Markforged
Markforged Metal X - rebrand.ly/TiMarkforgedMetalX
Markforged X7 - rebrand.ly/TiMarkforgedX7
Markforged Mark Two - rebrand.ly/TiMarkforgedMarkTwo
Tyrolit - rebrand.ly/TiTYROLIT
Mitutoyo - rebrand.ly/TiMitutoyo
Haimer - rebrand.ly/TiHAIMER
Schunk - rebrand.ly/TiSchunk
ONA - rebrand.ly/TiONAEDM
#CNC #Machining #Machinist - วิทยาศาสตร์และเทคโนโลยี
Barry is love. Barry is life.
And the Casanova of MRR
😂😂😂❤️😎
You made simple straight cuts look exciting. I was glued to the screen with anticipation to see what cutting parameters will you use next and the information you provided is gold! That is a great price for that tool!
Thanks Karlo!
You go Barry, this is an excellent do all cutter, and I agree it should be in every tool magazine. Also shout out to the video team as well for the great angle of the cuts and making Barry look like Barry 🤪 GO Titans of CNC
As I said said earlier today it is an amazing cutter used it for 2 years now insert usage cut to almost 60%, one tough tool worth every single penny and thanks for showing everyone how to use it 🗿
Been out of the game for a long time and wow the coolants system now are unbelievable muchlove for sharing keep up the great work 👍
You're the man and well said we need much more machinists of your caliber out there and awesome dude
That thing's a total beast! I love that machine too. So much more beefy than what we run in our shop
I envy you guys. I'm a trucker by trade. Your vidios are awesome. If I could go back 30 years I would definitely want to get involved in machining. Titan you and the crew are awesome. 👍
Thanks Barry I truly enjoy your show and documentary keep up the good work ..
That’s impressive, loved the mild steel cut did not expect that kind of feed! Only problem is in my shop the owner would shit if we sent a fly cutter across a pcs of steel like that. Can’t have the chips bead blasting the paint on the inside of the machine. It’s actually the craziest thing I have ever seen in a machine shop can’t scratch the paint on the inside. Recently he had a operator slow down a dynamic cut in aluminum that I programmed because the chips were hitting the walls to hard. Not sure how we’re gunna compete anymore if he continues the do this!! Man wish I lived in Texas so I could apply at Titans. Anyways always love Barry’s videos!!!
Barry! Great video and the dodeka is a monster. You can push them to crazy limits. My goto rougher. Keep up the good work!
Look at those chips fly!
Let’s see the come copper machining ! That’s all I do at work and to see some different approaches could help out a lot
Barry for president
I will absolutely mean tweet now that Musk is at the helm 😂
Barry really give a good presentation and good marketing explanation.
I am sorry to the camera man.
Hahaha thanks bro! And dont worry, me and the camera crew love each other. Just talkin smack!
Barry...have Titan work on getting a sweet deal from Haimer on bunch of 3D testers.....I'd jump on one of them in a heartbeat.
We have some sweet deals but ill check it out bro!
This cutting parametrs would kill my 11kW spindle 😂
Great working beautiful cutting
I NEED THAT TOOL!!!! 🤩🤩
great info on the feeds and speeds for each material, if you could add the horsepower required for each cut would be helpful info also.
I actually love that idea! Make sure you check out one of our last few videos where i talk about understanding your torque curves
@@barrysetzer i watch them all great info and sometime comic too
G’day again, I would have loved to have seen the surface finishes on those cuts. Cheers.
Barry is King
Hey buddy 😂
have that cutter been machining for 35 years works on all materials badass🗿 worth every penny ...!
No brag just fact keep up the good work Barry and showing people how to get her done. ! Nice tutorial. 🥌
I think this cutter Is going to help my shop.
Barry is crazy :D :D
what a beauty
Do you guys machine both ways when facing full stock or only climb mill?
Can you suggest a tooling for machining TUNGSTENMOLY material
It’s a machining cone major ID 21 mm
Lower ID 12.8 mm length 25 mm
Yes make a video bilding couplig dor boat shaff
Good job
3.310 vod stellram is awesome
You guys should do a giveaway for the last 1.
So it goes like this Teeeeeeeet! Tooooooot! Drrrrrrrrrr...!Drhrhrhrhrhrh..! Druhruhruhruhruh..! from Al to Inconel!! Now you know your sound when on good or on sweet spot zone! Did you say Boooom!!! ...and the Bluu not Blue chips!!
Barry is the Casanova of tools
@@nathanthomas8184 he is somehow mad at machines!! He acts weird towards them, with great love he shares his torture results. Just cool
😂😂😂
PS thank you awesome keep up the good work
What grade was the Titanium? Grades 5 and 2 machine very differently.
It would be interesting to see how these inserts perform on castings
PS castings absolutely awesome they don't even wear out I've been using the same insert not even indexed it yet for weeks cast iron. Moe's Stewart like hot knife going through butter 150 dept two and a half inch wide cut 36 in to 27 per minute. And you know when you get a casting there's a half an inch to 3/4 of material to remove on all sides and when you can lessen that time that's where you make money 🤑
2:59 now do that in stainless
I plugged in those 6061 speeds and feeds into my robodrill. It wasn't happy Barry!
😂 but were YOU happy? 😂
@@barrysetzer it almost stalled out. Part was only 2.5" long. I bet 3" would have stopped the spindle. Or maybe just lowered the rpms into the highest torque curve? But I went 1/2 the depth of cut, everything else what you recommended and the robodrill takes it. Still 100%+ spindle load. That's why I always ask for robodrill content.
Just keep the RPM’s and drop the feed by 40%
And then creep up in feed until you hit 80% load…
Then Run It.
Different machines have to be tweaked based on Hp, Torque etc.
Robodrills are fast but don’t have the torque or HP
Titan
@@TITANSofCNC MAKE THEM CHIPS, BOOM!
Suggestion: Change "SMM" to "Vc" "MMPM" to "mm/min" or just "F" and "MMPT" to "Fz". Imo it would much easier to read and understand at first glance
Thanks for the advice!
Can that tool ramp in closed pocket?
Is that a dodeka 30°, 45° or 75°?
Where are you getting these SFM suggestions from? Are they coming from the tool manufacture or some secret black book you have? Just asking for a friend.
We use recommended coupled with experience. And share the results with YOU! 😉
Can’t find your promo anywhere. Been looking for ages… the only promo is for a 2” 4 insert shell mill with 10 inserts. What’s the go with that? Thought it was the one you were holding.
Gr8 videos - gr8 source of inspiration 👍
Ill check into it!
I'd say the promo is for the tool in most of the video, I'm not sure why he's holding a different one in the promo thing...
@SpatialGuy Were you able to access the promo?
@@Sara-TOC Yeah, looks like it's the 2" 4 insert. Cheers.
i gib you challange: make your own tools, using a 64Rc (turned with CBN ofc) matt, grind with (id/OD) your whatever cylindrical grinding machine, test for specs (ill giv it her + - 4Um) and use it.
also changing tools seems alot faster than uhh changing inserts
and bary should listen to Im Blue by eifel 65
Most shops will setup a machine for a production run, and put the inserts in all of their tools as needed, and then run that production run and not be changing inserts all day long, only need to change inserts if your changing materials, which doesn't happen that often at most places, obviously if your a prototype or small jobs shop than you would want a couple of these with different inserts in them...
Sr I need salient bar 28 mm 300 mm lantha
I feel like have ready made a video very similar to this earlier in the year. Or am I crazy? Lol
Sorry but Ap?? For 316?
Coolant required in all materials?
Recommended but not required!
As versatile as that tool is, a lot of credit has to go to the vice jaws as well. Those tiny teeth grip with incredible strength.
Heck YEAH! I love everything Schunk makes. Bad experiences thus far are absolute zero
Very good observation I wondered that too as he makes them heavy cuts I'm thinking the blocks going to fly out of there I need that jaw .
Have a look at korloys they smash through alu like it's not even there.
Yeah aluminum has always been a kids game. Started running Mitsubishi AXD cutters a decade ago at 10,000 SFM. But now everyone does that or better
Hey Barry you probably have a little help in making Optimus prime the new robot and some of its components I would like to take that in machine a few of them out of metal making. The toy absolutely totally awesome 😁🗿
U guys didn't showing the radius cutting path that's the important thing.
Is this just the same video reuploaded from 5 months ago?
Had to recycle it, as we wanted to bring the promo back after it ended, just to help out the shops that missed out on it the first time.
Whatever youre paying Barry... its not enough
Hahaha thanks! But Titan pays me so good im not going ANYWHERE 😂
Yea those chips look downright indigeo 🤣
I prefer a vod stellram
How about giving a person the ability to view, learn, with tablets, computers, in rural America! Mention to Tyson
PS myself for the camera you need to have Optimus prime take care of the camera 📸👍🌛
I wor Dubai
But can it cut accurate in English and Metric? 😂
English only, sorry
@@Ltifone2014 I was afraid of that.. Can’t be scrapping parts if this cutter can’t cut in metric…
You bought 200 of them? Gee no wonder why there’s a shortage
That’s not stainless that’s plastic
Plees halp me
"When gone it''s gone." Never buy a system what is no further supported.
He’s saying that when the 250 of them they have in stock at that price are gone, they go back to the normal price. Because this is a very fine tool, Kennametal will make it for a really long time.
Exactly! This tool isnt going anywhere. But if you want the promo, its going fast. Thats all.
OctoMills suck.
Could you please drop this tool?
Is anyone else’s shop having hard time getting materials to the shop, metals
It's near the end of year. They want to sell what they have on hand. They don't want to bring stock that not going to sell by the end of year.
Barry for president
I just need 87 billion more mail in votes and George Soros and its a done deal!!!