I would at least check the piston ring gap while the engine is dismantled because I pulled down a Briggs and Stratton engine of mine almost 4 years ago now & replaced the piston rings,I eventually found out that there was over 1 millimetre of clearance on the top compression ring so I replaced them because the engine was beginning to burn oil anyway. The reject limit was 0.8mm. I recently rebuilt a Honda GSV190 lawnmower engine for my father which burned oil like a chimney until I replaced the piston rings which were a bit tired,the bottom compression ring gap was 0.5mm which is 0.05mm out of Hondas upper limits, they were tired because they had lost all of their tension !
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
I would at least check the piston ring gap while the engine is dismantled because I pulled down a Briggs and Stratton engine of mine almost 4 years ago now & replaced the piston rings,I eventually found out that there was over 1 millimetre of clearance on the top compression ring so I replaced them because the engine was beginning to burn oil anyway.
The reject limit was 0.8mm.
I recently rebuilt a Honda GSV190 lawnmower engine for my father which burned oil like a chimney until I replaced the piston rings which were a bit tired,the bottom compression ring gap was 0.5mm which is 0.05mm out of Hondas upper limits, they were tired because they had lost all of their tension !
Grate job
parehas po ba ung ignition coil ng ey15 tas ey20?
from indonesia your name.
Pwd Pala gumamit Ng videos Ng iba boss
Pde..may paraan lang para di ma copyright