i message Del of Eastway elec to come on your show as a guest, i bet he's got some cool stories. You guys do an outstanding job with your podcast, always watch and enjoy. i think del would be a great guest and i bet it would be one of your top vids. respect guys
I did the environment Niceic course April time this year, it was good involved, extraction and mvhr. I contacted NICEIC about being registered and they told me unless it's a full ventilation system( like mvhr) and its just an extract fan install in a bathroom it minor works and I didn't need to be registered as I had the training. 🤷
I had a discussion with NAPIT about extractor fans and one thing he mentioned is always check the manufacturers specifications, because some fans are only rated at 3Amps. So recommended installing a separate fuse spur or you can buy the triple pole fan isolator with a fuse holder.
I get the feeling the new rule is only an introduction to get us to talk about it. And will become enforced after a year when the next building regs start for air tightness & warmer homes.
Gutted I missed this. Big Clive did cover the pyrography (or whatever the name is where they arc through wood) he got a strike from TH-cam for that. Not sure why Clive doesn’t want to join the stream he does at least one a week and often joins the US HVAC stream plus this weird furry channel. Maybe it’s just too early for him as he typically works overnight. Poor photoinduction went totally off the rails towards the end of his videos, he was going through some shit and started talking about perpetual energy etc
I contacted BigClive about the podcast and he said "I should probably join some electrical podcasts. Although I'd probably just rant about the red tape and deskilling". I've sent him a link to this podcast.
@dsesuk absolutely Dave! It would be an epic episode! 🎉 Further reply: If I went on that podcast I'd rip into the NICEIC and the IET. And I think David Savery is one of the most characterful electricians. And John Ward wins points for good deep technical content. I've passed on your "tracker" email Dave
@@ForTheBirbs Would you go on it if asked Jim? To talk about the electrical field down under - different rules, regs, wildlife and ways of doing things? And cockatoos of course?
You'll be back in no time for burned out drivers or LEDs that changed colours due to cheap coatings. LEDs should last 10 to 13 years, drivers burn out before that.
![MASSIVE Tester [MFT] REVEIW 2023 with david savery](http://i.ytimg.com/vi/GLEdnavToJ8/mqdefault.jpg)
![[Part 1] ทารกน้อยถูกทิ้ง👶 หญิงชราเก็บขวดขายเลี้ยงดูเขาจนโต #โลกการละคร](http://i.ytimg.com/vi/nPTDvFCExks/mqdefault.jpg)
Fantastic chat, great having Savo on, cheers fellas and Sam, get heat in ya shed and hope you got a cable for net by now! 👍
One of the best episodes that I can recall - excellent discussion and plenty of laughs too. Nice one!
Cheers mate
i message Del of Eastway elec to come on your show as a guest, i bet he's got some cool stories. You guys do an outstanding job with your podcast, always watch and enjoy. i think del would be a great guest and i bet it would be one of your top vids. respect guys
I'm actually very good friends with he's son but del isn't really up for it he is of course always welcome
Good evening lads
Sam was on fire! So funny. The Toolstation/CT1 story ... those 3 mins were comedy gold.
I did the environment Niceic course April time this year, it was good involved, extraction and mvhr. I contacted NICEIC about being registered and they told me unless it's a full ventilation system( like mvhr) and its just an extract fan install in a bathroom it minor works and I didn't need to be registered as I had the training. 🤷
I had a discussion with NAPIT about extractor fans and one thing he mentioned is always check the manufacturers specifications, because some fans are only rated at 3Amps. So recommended installing a separate fuse spur or you can buy the triple pole fan isolator with a fuse holder.
not CPS registered, never will be, any and all notifications are the full responsibility of the person ordering the work. Not mine.
Did you get your remote PC access sorted? Have a free solution I use for support which i'm pretty happy with.
Tesco should just cover their car parks!
Is this a repeat from last week
I get the feeling the new rule is only an introduction to get us to talk about it.
And will become enforced after a year when the next building regs start for air tightness & warmer homes.
Fanny Engineer Qualification 😂
Gutted I missed this. Big Clive did cover the pyrography (or whatever the name is where they arc through wood) he got a strike from TH-cam for that. Not sure why Clive doesn’t want to join the stream he does at least one a week and often joins the US HVAC stream plus this weird furry channel. Maybe it’s just too early for him as he typically works overnight.
Poor photoinduction went totally off the rails towards the end of his videos, he was going through some shit and started talking about perpetual energy etc
'it will be a new form of piro'. Really? I doubt it!
Wholesalers closed on Sundays or closed by 12.30 on Saturday.
So where you going to go?
And yes MK is shit now.
Crazy how that brand got destroyed
@ELECTRICIANSPODCAST they still price like they are the best.
I contacted BigClive about the podcast and he said "I should probably join some electrical podcasts. Although I'd probably just rant about the red tape and deskilling". I've sent him a link to this podcast.
I'd absolutely love it
But that’s what we rant about
Would be great if you convinced him Jim. Think of seeing him on here in the wild!
@dsesuk absolutely Dave! It would be an epic episode! 🎉 Further reply: If I went on that podcast I'd rip into the NICEIC and the IET.
And
I think David Savery is one of the most characterful electricians. And John Ward wins points for good deep technical content.
I've passed on your "tracker" email Dave
@@ForTheBirbs Would you go on it if asked Jim? To talk about the electrical field down under - different rules, regs, wildlife and ways of doing things? And cockatoos of course?
Luminaires.....you get what you pay for! Get name brands that you trust....there are too many cheap options on the market.
You'll be back in no time for burned out drivers or LEDs that changed colours due to cheap coatings. LEDs should last 10 to 13 years, drivers burn out before that.