Yes it will !!!! Especially when you’re doing stainless steel specialty work in a kitchen or clean room!!! As a hvac mechanic , most people think you’re work is hidden in the ceiling…smh.. thanks bro!!
Not very convinced about the quality of cut, though. Yes, it would be straight, but also, since there is only a small connection between rail and jigsaw cut would be twisted and not at full 90%. A simple rail with line in the middle for blade to run through would be much better 😉
Umm that tool doesn't make much sense, I may be missing something. If you would have to accout for the off set of the jig saw blade, why not just use the track as a straight edge and butt the jig saw's base up against the track to make a straight cut, it would do pretty much the same with no adapter.
I mean, when I use a jigsaw, it is usually for when I need a clean cut while out of the job, so I use it upside down. Unfortunately this won't help unless I use the track clamps and mark on both sides. Doesn't seem too useful for my business.
The worst festool tool I ever have is the jigsaw. In just a month a little pin that keep the pendulum close to the guide got broken and the blade was shaking all over the place and it was impossible to cut in straight line . Well overpriced.
I could retire for the price of his shop
Quality hardwood furniture sells for tens of thousands. This man probably makes a killing with his work
He does talk! Well damn.
Omg he isn't a mute
For once someone says, "I know what you're thinking", and he's right.
Thanks Dusty for continuing the short lessons.
Regards
The time where I’m cutting sheet metal and I remember I have my track with me and that adapter… once in 7 million years!
If you're planning on cutting it, plan accordingly.
Круто Вам, когда все есть, можно хоть ракету построить.
Might come in handy when I need to cut sheet metal and I didnt bring my cnc water jet
Yes it will !!!! Especially when you’re doing stainless steel specialty work in a kitchen or clean room!!! As a hvac mechanic , most people think you’re work is hidden in the ceiling…smh.. thanks bro!!
Soy fan de el arte de la carpintería....💝🇨🇴🇪🇦
Damm I’m impressed. This guy does everything so good and so easy.
He even talks effortlessly
Красавчик.
Мужик, я не понимаю английского языка, но твои видео лучшие!
Not very convinced about the quality of cut, though. Yes, it would be straight, but also, since there is only a small connection between rail and jigsaw cut would be twisted and not at full 90%. A simple rail with line in the middle for blade to run through would be much better 😉
Festool Frank!!!
GÉNIAL 👍 👍 👍 CELA PARAÎT PLUS LÉGER POUR TRAVAILLER.
I’m thinking about getting a track saw on your videos
Nice
Festool классный инструмент. 👍😊Но для меня он буржуйский.
Nice. Just bought the Jigsaw and used it on a small project. That said, the attachment seems like a handy resource for “off” cuts.
You're are amazing 👏 I'm from Egypt 🇪🇬
Cool !
Umm that tool doesn't make much sense, I may be missing something. If you would have to accout for the off set of the jig saw blade, why not just use the track as a straight edge and butt the jig saw's base up against the track to make a straight cut, it would do pretty much the same with no adapter.
Thanks, nice to hear from you. 😁👍
I'm not sure but.. I think.. I think this guy loves Festool
There are two kinds of people. Those who love Festool, and those who never tried any.
I swear I was just trying to add up how much $$$ he got hanging just on that wall???
Can this cut birch plywood 46 mm? 2xHPL
I'm still dreaming of owning anything that is Festool, still on the mix bag setup
подарите мне погоужную пилу фестолл по братски🤠
First time I’ve ever heard you speak my man
Dusty👍👍👍🤘
Another peerless video!
Really very nicely done. Thanks for being there for us!
I've used the Makita variant for cutting insulation.
ดีเยี่ยมเลยครับ
A big use for this is after you plunged with the saw to get a cut out and then use this to get rid of the corners cleanly
ओज
Did you know that most of your viewers can’t afford festool anything, and usually can get the same job done with Makita, Dewalt, Metabo, or Kobalt???
Will work for cuttting thick slabs up to 4 and a quarter thick, the track saw will not do that.
Why is Carvex SO LOOSE on the track with that base? TS allows track tightening... carvex track adapter has raw slop.
Друг мой где ты находишься? В каком стране? Скажи пожалуйста...please
Will cutting metal hurt or scratch the guide track?
Holy shit, he can talk
😍👍🙋♀️💕
If Ill need to cut sheet of metal I'll take out my metal cutting circular saw.
На русском тоже скажи да по-братски
Yeah we all learn from Watching Project Farm, that Fiesta tools are absolute junk why they cost so much I have no idea
wait wait wait!! you can speak ?
It is just a figment of your imagination that you think he is talking
festool❤
Screw up a jigsaw blade, $7-$15. Screw up a track saw blade, well, don’t wanna find out that cost.
homeowner’s need to understand the Festool up-charge on their invoice
It says it on the box...
I mean, when I use a jigsaw, it is usually for when I need a clean cut while out of the job, so I use it upside down.
Unfortunately this won't help unless I use the track clamps and mark on both sides. Doesn't seem too useful for my business.
Привет ви па руским знайиш
The worst festool tool I ever have is the jigsaw. In just a month a little pin that keep the pendulum close to the guide got broken and the blade was shaking all over the place and it was impossible to cut in straight line . Well overpriced.
Been a while now that I've seen you use a brand different from festool. Are you now sponsored by them ??
Hello sir kya aap hindime baat kar sakte he ?
If you don't watch rhe visual you'd think Jordan Peterson got into a cool late life hobby.
Silly flappy headed canooks 🤣
أتمنى
hmmmmmmmmm
Open the noor
🫡
Merci !
Thank you so much!!😁😁
...so why not show working with metal