keep power windows running smooth - silicone lubricant spray
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2020
- keep power windows running smooth using silicone lubricant spray
In this video Im explaining a simple DIY task to keep your car's power window running smooth. Every few months clean the channels to get rid of the dust. And then use Silicone lubricant spray to keep the channels. Silicon lubricant is safe on rubber and plastics, keep them soft and shiny.
Below are the links if you like to purchase the product.
Important Purchase Links:
~~~~~~~~~~~~
(A) Silicone Lubricant Sprays :
Aerol : amzn.to/32UgPnA
Wuerth : amzn.to/2FT5YSj
Abro : amzn.to/3hVbm4p
3M : amzn.to/2RTCndX
HealthGenie : amzn.to/3kEFjHE
(B) Other important & useful stuff :
Rust prevention / penetration oil / thread loosen :
- WD40 : amzn.to/3hRjZNb
- GROZ-GO20 : amzn.to/3kHGtC8
- Zorric 88 : amzn.to/3cnJZPe
Metal Polish :
Autosol : amzn.to/3kyVLJw
Brite-o : amzn.to/300RE0W
Iso Propyl Alcohol (IPA) : to clean stains and stickers / clean electronics / clean surface :
amzn.to/33UyvyO - ยานยนต์และพาหนะ
Car lovers/teachers in any language is cool.
Oh yaaa. Automobile lovers ! 😊👍🙌
I was searching methods to keep my car windows smooth
My pleasure that video was helpful 👍
Genuine, scientific and informative video, very nice.
Thanks for your lovely words. Do explore my channel if any other video interests you. 👍
Love this clip thx 😊 🙏 ❤️ 💕 😘 💖
Thanks 👍✨
Great Video!
Thank you. You may explore my channel if any other video interests you. Take care.
In one of your recent videos a viewer asked if you should use Silicone spray on the bushings or rubber parts surrounding your shocks, suspension. Scotty Kilmet did not recommend Silicon. He recommended "AT-250" ( you'll have to look it up, sorry). There is something in silicone that does not lubricate the rubber protective parts long-tetm around the shocks. FYI.
Thanks brother..!👍🏻😇
Thanks 😀🙌👍
Excellent information
Thank you. You could explore my channel if any other content interests you. Take care.
Very informative
Thank you bhaisaab 😄👍
Thx a lot 💓 💗 💛 💕 ❤️ ❤️
Thank you 👍
Very informative video
Thanks 👍
Excellent
Thank you. You may explore my channel if anything else interests you. 👍
can this use for door beeding
I think we can use it. Just ensure the liquid is not containing more oik, else it will spread n attract more dirt. 👍
How's your car rubber now?
An Amazon review says, it's petroleum based. In that case it will dissolve rubber.
I didnt find any damage to the car rubber seals. they are good.
@Pranav sir, can we use this silicone spray on seat belt to smoothen the extraction-retraction function?
I would not recommend, bcoz the seat belt would become messy. Instead just clean the belt properly and also the bracket on which it slides. You may add a drop in the latch to lubricate, but that won't effect the belt's movement.
@@PranavBhayani Thank you sir.
Very nice tip - indeed a dry version would be good. Thanks. 👍🙌
Bhai isko agar plastic pe use karenge aur paint pe karsakte hai aur kya ye weekly washing se hatt sakta hai aur kya mai isko sunroof mechanics me dalsakta hun
I didn't try on plastic, but you can use in parts like Rubik's cube. There are other sprays specially for shining plastic / fiber parts. This silicon lubricant does not easily wash-off, and will last a long time in window channels as I have shown in video. It can be used as lubricant in various parts, do try. I also tried in door hinges, sliding gate - worked fine.
@@PranavBhayani sir pzll hard water removel per bhi ek video banao bhot horakha hai car me
Can this be used to rejuvenate rubber in joints, suspension, differentials?
long back even I had thought about this, but didnt do. Reasons : (1) in modern days, its not pure natural rubber, buts its actually EPDM rubber - kinda synthetic rubber made with chemicals. en.wikipedia.org/wiki/EPDM_rubber . This material is quite durable, and used in several areas. Noise or friction caused by rubbing surfaces can be reduced by silicone grease lubricant, also can be treated for softening / conditioning. However petroleum grease would spoil the rubber.
(2) suspension parts often have to encounter lots of flexes / bends and are fully exposed to the environment. So applying the lubrication would make more dirt stick to it, and slowly start entering the seals and cause parts failure. Many of joints (eg. tie-rod-end) have factory filled grease and a rubber boot seal over it, but eventually the seal goes away and grease spills out, causing to not work properly. Hence, its better to have cleaner suspension parts (say even a simple water wash after a dirty drive is fine), and not put any dirt attracting lubricant over it. After a certain time, anyways the parts would go bad, and its better to perform the correct replacement.
So, I personally wont advise putting such lubricants on such critical parts. hope my info is useful.
@@PranavBhayani thanks 😊
Just saw Scotty kilmer spraying silicone spray on suspension bushings .I think it would not harm bushes(water resistant properties) if sprayed in small quantity.Btw is this product petroleum based as someone said in a comment.
Yes I have seen that old video. You may try and share your long-term experience. 👍
👍👍👍
👍🙌✨
Can clean dash board with this silicon spray?
Certain dashboard polish do contain silicone. Though I have not tried yet, but believe that silicone spray can surely be used on such plastics / fiber parts. Just ensure that it's a very thin layer applied, and not too much liquid - otherwise surface will come slippery and attract dust. 👍
Yes of course
g8 explanation bt video thuri short honi chahy
Thanks for your comment 👍
Bro my power windows are stuck. I was asked to change motors from my mechanic. Can I use this spray? Or Shall I try WD40 worth 300rs. There are so many WD40 products I don't understand
First do a cleanup of rubber window channels to remove dust/muck, can use WD40 for that task. (Watch my video). If motor is really bad, then needs replacement. 👍
Sar aap kya kaam karte ho?
This video could’ve been done in less than 3 minutes.
Sure, but it's detailed so. However TH-cam also gives option to control speed of video, which maybe good for someone for refreshing content ! 😀