The best Diode Laser in 2022 - The Neje 3 Max
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- ➡️ Click on ...more↙️for lots of Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation...
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutf...
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145...
Check me out on Rumble! rumble.com/c/c...
=======================================
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com...
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com...
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com...
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/laho...
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com...
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com...
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ Ocooch Hardwoods:
ocoochhardwood...
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/...
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero
I bought the NEJE Max 3 v2 before I come across your video. Just got it, have it laid out, about to assemble. I've never touched a laser before. But after shopping around for a couple of weeks, it was the best buy. I got it with the E40, but got out the door tt&l for about $490. I'm going to get the lightburn and hopefully will be up and running soon. It's big! 32" x 18" basically. Had to build a massive table for it
I did a video on the 3 Max Steve. It's a beast to assemble, but once that's done, it's off to the races!
Hi from Australia Rich,
great vid. This made up my mind on getting the neje. I'm extremely happy with the power and accuracy of it. no one told me how time consuming dialing it in would be though haha. part of the fun though and only needs doing once if notes are taken and done properly.
thanks for your lightburn college playlist. It was (and continues to be) an extremely great help.
Keep up the great work.
Cheers
Glad I could help!
Just placed mine on order from NEJE. There is a selection for it to be shipped from USA with your discount code it was $589. Now to go back to get the focus plate, and pump you suggested , and find a printed air nozzle. Thank you.
If you need one already printed, there are plenty on Etsy.
@@TheLouisianaHobbyGuy Thanks again will look.
Nice! Awesome job on the Last Supper, I have a couple of cousins I need to do this for, those gals would love it.
It takes a long time but it's worth it Allen!
Great video Rich and the timing of it being posted was great. I started putting my Neje 3 Max together this morning. I picked up on several good tips from your review. Thanks!
Awesome Chuck! You're going to love it!
Great video, I not only learned about the engraver, but I got some ideas for projects.
Glad to hear it Harvey!
AWESOME! As always, NAILED this review ... at least, for this newbie! I LOVE THIS Laser! 🥰 Another goal, for me, to work/learn towards ...
This laser is actually a goal worth working toward!
Hi Rich- Thanks for all the great content. I'm considering purchasing the neje 3 max. Couple questions...have you tested the E40 fixed focus vs. the adjustable focus A46040? Would you recommend one over the other? Thanks and keep up the great work!
I have one Paul, but I haven't tested it yet.
Thanks for the quick response. Hopefully you have time to do a comparison video. Thinking I might go with the E40 so I don’t have to mess with focusing. Fingers crossed…
Nice review Rich. Having seen it in action I am more convinced to get it. After commenting on Facebook that it would be nice if it was over 1000mm in length then it would be perfect, I noticed on the Neje site that there is an extension kit effectively doubling the Y axis length and that is huge! This is a well designed product whereby any owner can upgrade at their own pace.
Yes Dimitrios, you can buy extensions for this!
I’m just setting mine up with the extension kit. Workarea 810 x 1030
Thanks man, I'm convinced and gonna order one for work. Was already impressed by owning Neje master 2 plus, getting air assist now. Opportunity knocks......
Good choice Anton! You're gonna love it!
Awesome. I’ve been waiting on this review. I got my Neje 40w about a month ago and it has been awesome.
Nice Tomias! All Neje products are quality made.
Hi Rich, I Just want to remind you not to exceed the current spec on the relay with multiple items on a power strip. You can use the relay that came with the laser to drive another higher current relay if needed. Thank you and have a great day.
Thanks Glenn, but the air scrubber is 4.1A and the small compressor is 0.5A. If I use the shop compressor, it's 4.5A. So I think I'm good on a 15A switch & circuit!
Hi Rich great video. Would have loved to have seen the actual setup of the laser for focal point, but thats not my question. What air compressor are you using and at what psi/bar? Are you using any kind of regulator? Cheers
I have a video on the ramp test on my channel for the focus. I use a California Air Tools quiet compressor with a standard regulator and water separator between 9-12 psi, depending on the job. I also have a portable aquarium pump at 60 lpm.
I have this machine, one of the first to be used in South Africa and I absolutely love it. Wolf83 on your Le Hobby Guy forum. Thank you for an absolutely amazing channel and website. Your work is appreciated on so many levels.
Awesome Zak! Thanks for joining the community!
Hey man, can you tell us more about the machine. Can it cut 4-5mm plywood easy? How much work hours do you have done? Did you grounded it?
@@quetzalcoatlhermeticus8024 Yes, it cuts 4mm ply easily. The Luan I used in the video was 5mm. I have about 50 hours on it, and no it's not grounded, my outlets are.
Difference with unplugged the neje and use is emergency door button is, losing you data when you unplugged but with the door bouton you can continue to engrave from where you stop , the file is still in memory.
Thanks for the tip!
Thanks for this video. Do you recommend this laser for beginners? I'm only considering it because of its large work area, however the set up seems more complicated than the others I"ve seen you reviewed. What are your thoughts?
I don't think I would recommend this for a beginner.
CONGRATULATIONS ON THE VIDEO AND ON YOUR TIME THAT IS WORTH A LOT, A QUESTION? IN THE 30TH MINUTE OF THE VIDEO YOU USE A TAPE, WHICH THE FINISH IT GIVES ME SEEMS IMPRESSIVE, COULD YOU TELL ME WHAT TAPE IT IS OR IF AMAZON HAS IT? THANKS IN ADVANCE AND GREETINGS
Aquí tienes: amzn.to/3mLCbA8
thanks a lot, muchisimas gracias
I’ll be taking advantage of your remote help soon! Great idea!
Awesome!
Hi Rich, thanks for your helpfull video's! I was wondering, do you prefer this Neje 3 Max over the Longer Ray5?
Yes, absolutely Madelaine.
Great review! I ended up actually going with the 14W Jtech laser and I haven't had any regrets. The customer support helped make it work out of the box with my LC-60A. I wonder how they stack up.
I don't know Forest.
Another great video , this looks like the laser i will be upgrading to !!
Good choice Stuart!
😅 I got 2s Max, 3weeks later they released 3s Max.
I made my own bracket and drag chain.
In it has a dedicated 12v, ¼air tube, and it's 2 cable controller.
Thank you. For all your guidance.
Ps. I paid $350 at Amazon
"trying to survive, without needing working 9-6 shift"
Awesome Jose! Thanks for sharing!
Hello Rich, great review I just purchased the neje 3 max a40640 should be here on Thursday. I have the foxalien riser 20w and have ben working it to death but I needed something faster and bigger. I was a little fooled buy the air assist though it was the pump. until I saw this review, thanks. it looks like you filmed it at different times because it looks like you had two different air nozzles. I defiantly like the second better. is that an upgrade... Thanks For all your videos it has helped me a great deal.
It was filmed over a few weeks of testing Mark. And! They have come out with a metal air assist just after I completed this! It'll be in a video this week during "accessory week".
Great video Rich. Its a Monster. I shared this on my Socials.
Thanks Jerry!
Thanks for reviewing this. Got a little complicated with all the accessories you have 🤣🤣. Looks like this will be a great upgrade from my Ortur LMP2. Guess I’ll look for a buyer. (BTW, how much time to engrave the last supper?)
Twelve hours twenty minutes.
Hii :) great video. But can you tell me how did u focus that laser.. I have problems to do it on the right way. I can see u have something to put under the laser right?
All lasers come with a focusing tool.
Hi Rich Nice video..........I have the A40640.....cant get close to your use......Can you say whether yours is straight out of the box Ready or did you unscrew diode 2.5mm like Neje says but then you can only set laser between 4-6mm from work.....I see yours is set at least in the mid 20 mm's, can you explain any of your setup and dialing in if any ........Because I'm totally frustrated
I use mine at 17mm Gary, or turned all the way in 99% of the time.
Hello Rich! You are the tester of all lasers!
But honestly, when you say in 1:09, "unlike all the other lasers out there..." You're encompassing SCULPFUN S9 and S10, ATOMSTACK S10, XTOOL D1, etc., so about all those related, Do you think the Neje 3 Max has a superior laser?
There are so many laser machines that we get a little lost even to choose when buying!
Thanks
The A40640 is now and always has been the best in its class IMO Daniel.
I explained the focus in the video Daniel. It's both.
@@TheLouisianaHobbyGuy Thanks
I’m getting this laser for sure! Great review
Hope you enjoy it Mark! I love mine!
@@TheLouisianaHobbyGuy all ordered can’t believe how cheap they are! I have got a question that I can’t seen that’s been answered or possible!
Can you free draw in lightburn? So not straight or bending lines… totally free hand like a pencil to paper?
Cheers
Mark
No Mark, you can't.
@@TheLouisianaHobbyGuy but aslong as you draw it as a vector drawing it should be imported into lightburn easy and then can be manipulated edited in lightburn right
Yep!
Very nice video walk trough. Would you be able to use this with the Ortur YRR rotary attachment?
Yes, absolutely, you just need to check the pinout on the wiring.
Great Video, I did buy one and have it setup and was trying it out. Coming from a K40 CO2 the mm/m vs mm/s was throwing me off. I did download your cbl file for the A404640 but it is a little lacking, do you have one that has more settings (engrave, more Materiels). I looked at the xTool 10w and may use that and tweak it but if you had one so much the better. Also was looking for a waste board template and your template that you use in the video for common picture sizes. Thanks again and keep up the good work.
You can use any of the clb files on the forum that match your wattage Kyle.
Hi Rich. I love the video. Thank you so very much! My biggest question is the air assist. Looks like I'm running the same air pump that you are using. The tubing and air assist use a much smaller diameter tubing line than what the pump tap uses. I believe the line that fits the air assist is 2.5mm (or 3/32") ID tubing and the pump tap uses 3/16" ID tubing. What are you using to get everything to fit correctly? I've tried looking for barbs to downstep and can't find the right fittings. Please please please help. Thank you so very much.
You can get the plastic barbed reduction fitting at Lowes for $0.89 Darin.
@@TheLouisianaHobbyGuy Thank you, Rich! You're the best!
Thanks for the video I have been waiting to see this video, nice to see it, thanks for an honest review. I have been looking at this and the xtool d1 so glad to hear you liked it, seemed to have a lot of features from my research.
Could you do a detailed video on ways to focus this laser?
Neje said they have a 20w laser head in the works, but having some delays due to supply, would u reccomend waiting for this to come or going with this version?
I don't see the difference that even makes a 20W diode necessary. 7-10W Seems to be the secret number if you ask me. Seems that above that you're in the Co2 price range and might as well go that way instead.
Thanks for the review. Very interesting. Love the 2040 extrusions. Nice smart feature. And the size is fantastic. Control board riding the rail, not so much. I like the relays, need some for my Sculpfun. I didn't notice endstop switches, are they there? Not necessary, but a nice feature.
What compressor is that and which one do you want to get? I am in between pumps.
I guess it doesn't matter what rail the control board is on Mark, It doesn't move. Yes it has hidden limit switches. I replaced the crappy 50W air pump with a 200W pump, 3566 GPH. Awesome pump. amzn.to/38PegJv
Hi Sir, @The Louisiana Hobby Guy I'm using Neje 3 Max Laser Machine,
My question is:
Why is Y axis [Landscape] Burning sharper than X axis (Transverse).
I hope you can enlighten me.
Thank you, teacher...🙏
Type $$ in the Console tab and press Enter. Compare $111 & $112. If they're not the same, you'll have this problem.
You did a good job on this review. Lots of helpful information to help make the right decision. Do you know if it will work with the new x tool rotary?
I'm sure it will Bryce. It's a standard Nema 17 Stepper motor.
FELICIDADES POR EL VIDEO Y POR TU TIEMPO QUE VALE MUCHO, ¿UNA PREGUNTA? EN EL MINUTO 30 DEL VIDEO USAS UNA CINTA, QUE EL ACABADO QUE ME DA ME PARECE IMPRESIONANTE, ¿PODRÍAS DECIRME QUÉ CINTA ES O SI AMAZON LA TIENE? GRACIAS DE ANTEMANO Y SALUDOS
Aquí tienes: amzn.to/3mLCbA8
Very nice set up. Most surprised at the cost of that one. Being a newb, I fell for the marketing on the other one, but I still don’t quite regret it yet, being it was my first experience with a laser and accessories that came with it. Anyway, great examples of what this Neje does and can do.
Thanks Jeffrey!
Rich, thanks for the videos they are a great help. Can you tell us what you are using for fume extraction?
I have several things depending on where I'm lasering. In the laser shop, an 1100 CFM extractor in the attic. In the wood shop, an air scrubber.
@@TheLouisianaHobbyGuy Thanks Rich but 1100 CFM might be a bit big. I just ordered the NEJE 3 Max A40640 and that is my first an only laser so any recommendations for just one laser. I do have a dust collection system for my wood working, it's a large Jet system and I was thinking if I could find an inline filter that might work but I have not found a true inline, or I guess it would be a feed through filter. Thoughts?
Really good review, many thanks. Looking to purchase my first doode laser, the Neje 3 Max soon which module would you recommend the A40640 or the e40? Will be mostly cutting with a little engraving too.
Also what capacity air compressor do you think is best? Thanks :-)
I prefer the A40640, but the E40 is just as good IMO. It really doesn't take much air for a diode laser, so just about any of them work.
I believe the E40 cuts better than the A40640 from what neje states. I have the E40 and am extremely happy with it. The fixed focus lens makes adjusting very easy. Takes forever to tune when all the youtube vids I see use 5w lasers. I'm etching at 5=15% power, this thing is powerful !! I have the same aquarium pump as the video. 70L/m seems to be the sweet spot.
@@goonermark8565 The E40 is a great module!
Hey Rich, just found your channel and I have to say it's really nicely done!! really good information. But could I ask you, as a RC model aircraft guy, I am looking for a cutting machine to cut balsa (max 10mm) and plywood (called triplex here: 5mm max) that this machine is the best and really has sufficient power to do the job? now there are more powerful options out there as a complete kit (Atomstack X20) but the question is, is it worth it's money and do we really need so much power?? would it just speed up the cutting process? also, any recommendation about a good airpump? keep up the good work!! Edit: If I would go for the Neje 3 Max I would go for the E40 laser module (I guess) because it has that build in air assist system. Just think that makes life easier!! your thoughts?
Thanks Egon! For what you're doing I would go for the E40 as well. It's a really nice module. Of course the 20W machines would make much faster work of it. If you can wait a couple of weeks, I'm in the process of testing a new 24W commercial grade machine that's about to launch and leaves all of the others in the dust. You'll want to see this one!
Hi Rich , nice review. I have 2 Q's;
1- can it cut 8-10mm oak plywood?my sculpfun S9 used to cut 8mm ply but after some use it's unable to..(even after cleaning)
2-Neje website doesn't recommended going over %80 power for prolonged use, do you have any time - power graph ,bc it would be nice to see the power drop over time because to be honest no one is going to stay under %80 .. and using daily at %100 will definitely shorten its life but I don't know how much , if you have a approximate graph I'd appreciate it..
Thanks
No I don't Ahmet.
I’m new to lasers.
I’m getting info everyday since the last 2 weeks and I think im buying the NEJE, but I have doubts between the A40640 and the E40 modules. Mainly I would use it for wood veneer cutting, don’t know if I’ll make many engravings in the beginning but I don’t want to be closed to that option.
The A40640 seems to be more complete but I’m worried about having to be continually changing the focus adjustment. Is it complicated to find the sweet spot? The E40 seems to be easier for a rookie.
Thank you Rich.
Both work well Juan. The A40640 only needs to be focused once. I suggest turning the lens all the way clockwise and running a ramp test.
Very nice review bro I would love to get this one I have the ortur it been working good but on size I really would love to get this machine
A case where size really does matter James! 🤪
Question on the M7/M8 setup you have. If you are using a tankless air compressor (I use a pretty large Airbrush compressor for example) Is there really any need for the M8 air solenoid valve? Couldn't I just connect the airline from the compressor directly to the air assist like I have now and use the relay connected to M8 to turn the compressor on and off as needed? That would eliminate an extra component and simplify everything. The only reason I can think of to need the air solenoid would be if the air supply was coming from a tank or tank type compressor.
Yes you can Ray. Just use the M7.
@@TheLouisianaHobbyGuy Thanks for the fast reply! Love your videos.
How long did the "Last Supper" take to finish? did I miss that in the video? also, does the Neje have roller/tumbler capabilities? that will be a big portion of what it will do should i decide on this over the Comgrow. Thank you !
I don't remember... I think it was like 8 hours or so. And yes, you can use a roller on this. I just did some last week with the xTool RA2 roller.
@@TheLouisianaHobbyGuy great! I was hoping it could run a roller. Thank you
Thank's for your video! Do you have the same focus for engraving and cutting?
Up to 2mm I do Patrice. 3-5mm and I'll lower 1-2 for cutting.
Thank you! If I have good understood, up to 2mm is for engraving and cutting in the same time.
3-5mm for only engraving and 1-2mm for cutting?
Yup!
Hi Louisiana! I need please your help. I have received yesterday my new NEJE 3 MAX with the laser A40640 (adjustable focus). To adjust a correct focus to engrave and to cut in the same job, I have understood your last answer (up to 2 mm for engraving and cutting in the same time), but what is the distance beetween the bottom of the laser and the top of the material to engrave? Thank you for your answer!
For the Z1, there's a spare header on the board that natively works w/ lightburn air assist toggle. No M codes needed. It runs on 19V logic which seems odd since the PS is 24v. I just need to CAD and print a case for my SSR to run the pump. The jack on the board uses the same plug as endstops.
I haven't looked that closely at the Z1.
Thank you for the great information
Glad it was helpful James!
great video! The M7 and M8 are very impressive. But their website has very little information.I have a NEJE 2s max and have to say the NEJE 3 max is more powerful.
The Wiki has a lot of information Kun.
Is this your recomended choice for a laser at around this price range? Im looking at getting it with the new e40 laser module
I don't recommend lasers Tom, but this is one of my favorites.
Wow, that thing is huge. I got my A40640 not long after you got your first one, I use it nearly every day. It's still mounted on my old OLM2 and is a real workhorse. I wonder if they'll be selling that motherboard separate like the laser modules at some point? Thanks for the video!
Yes George, they have the control board for $79.
shareasale.com/u.cfm?d=886868&m=101855&u=2881930&afftrack=
Hi friend, I have to ortur laser master 2 Pro, it's difficult to connect the neje module to ortur machine?
Not at all. I had a Z adjuster so all I had to do was drill two hole to mount the Neje mount to it.
@@georgechambers3197Ok, physically there is no problem, electrically what should I do, I would love if you could elaborate a bit I got lost
Is it possible to cut clear acrylics with this ? I know the answer is no but I was wondering if there was a work around as if anyone would know it would be you
No, not clear Mark. The laser doesn't see it and passes right through.
If you were going to use a rotary tool for a tumbler, mug, etc, do u just use wood or something similar to space the full machine up high enough? (I know xtool has the screw in puck system but haven't seen how one could do it with the 3max)
I have a 4x4 cut up into different sizes with slots in the tops for the legs to slip into. On the Pergear, it has legs, so I use those too.
Ok so I stopped your video half way thru to write the comment below. now realizing that had I watched all the way thru first it would answered my question about the air nozzle...LOL.. Do you sell the air nozzle or maybe the file. (my son has a couple of 3D printers). how could I get it thanks for your help.
They just launched the all metal air assist Mark for $17! tinyurl.com/nejeair40640
Thanks for sharing does this machine support a roller to be able to engrave on water bottles
Yes it does.
@@TheLouisianaHobbyGuy
Thank you for the reply
Great review!! Can this thing engrave on curved surfaces, like cups and tumblers? I haven't been able to find any accessories making that possible but maybe I overlook something? (Newbie)
Yes, the rotary video will be out next month.
Is the atzer p20 still best diode in ur opinion or neje as good ..do u got any info on yorahome 6550-pro laser
@@lilyellowbushoneyliquidize8004 Yes, but I also love my Neje as well. It has a copuple of more must have features.
@@TheLouisianaHobbyGuy Can't find the video with the rotary roller. Is it out yet? Do you think I will need it for engraving wooden beads (16mm and 20mm)?
I used a windows program to stop the laser every 10 minutes for 3 minutes and then continue to engrave for 10 minutes, that why I was able to work with the laser 10 hours or more with no problems
The problem was the shop was too hot at over 107 degrees. When I did the 2nd burn in the low 90s, it came out just fine.
Thanks Rich, new to laser engraving and binge watching your videos :-) I have the Neje 3 Max, but can't get the frame completely square; I've spent many hours on this so far, including reaching out to Neje and fb groups. When I move the laser gantry all the way to one end, the left side touches the stop, but the right side has a 1/8" gap. I use a carpenter square like you show with the screws slightly loose for adjustment, but when I tighten the screws, square is lost. Mounting to a waste board, fastening one corner, then the diagonal corner, does not solve the issue. Do you have any suggestions? TIA
No, that's the only way I know how to do it. Measure your extrusion... perhaps one is not the right size. Being off by just 1mm will ruin the square.
@@TheLouisianaHobbyGuy Thanks, given all of the different options that I've tried, and the fact that this doesn't appear to be a common issue, I'm guessing one of the extrusions is off, although since it's assembled, not really easy to measure.
Was there a solution to this?
Hey Rich, any chance that you can do a review of the Atomstack 130W - 4 diode laser? It's pretty expensive but it looks like it can do some serious cutting.
If they send me one Peter.
Hey mate really curious I'm looking at purchasing and am indecisive and was wondering what you thought, for a hobbies engraver would a xtool or neje be better?
I don't recommend lasers, but I would choose the Neje over the x-Tool hands down. That's just my opinion.
@@TheLouisianaHobbyGuy thanks a lot mate i really appreciate your content and advise
Rich, the laser on mine is staying on in lower power even when at idle, not doing anything. is that normal or have I missed a setting somewhere? By the way I love the suggestion to plug the air assist and exhaust systems into a power strip and run the power strip through the M7 relay. Works great.
Hi Chuck, yes, all of my Neje modules are like the Motel 6 🤪 Neje told me last year it's 1/2% power for framing purposes.
The laser is staying on in lower power even when at idle is to assist positioning and focus adjustment, low power brightness can be adjusted by software. This is the operational advantage of diode lasers compared to CO2 lasers. NEJE has always adopted this design, especially in It can bring a lot of convenience when carving small works.
Thanks for the review. Do you know if the 20mm v-slot rails from OpenBuilds are a direct replacement for the Neje rails? Neje wants $60 in shipping for $69 rails from China for the extension.
I don't know Rick, but I wouldn't think so.
What a great machine.
I love it! Especially for the big jobs!
I currently have the Reizer Mega 800x400 20w (5.+ output) and I love it. Wish it could cut thicker balsa.. like 1/2” without setting it on fire. LOL. With double the output, would this make sense as an upgrade to be able to produce balsa parts on an ongoing basis (short of commercial CO2)?
Also, the printed air assist nozzle, was that one that fit on the lens or mounted on the side? I prefer the ones on the lens… seems to keep my fox alien laser clean.
Faster speed and multiple passes will keep it from burning Peter.
@@TheLouisianaHobbyGuy ordered and received the NEJE 3 Max… in like three days (shipped from So Cal). Took all of 15 minutes to assemble and fire up… I have only cut one R/C rib on a flat spoil board… and I am VERY impressed. Great call on this machine. Can’t wait to cut an entire airplane kit. Thanks for the review and the heads up on this machine.
Assembled and installed the 3 Max into the CNC Router table cabinet… perfect fit by chance… probably couldn’t have designed it to fit more perfectly.
@@peterb7401 Glad you like it!
*Make sure to push this laser Gantry to the TOP RAIL BY HAND when assembly is done! This will ensure the left and right stepper motors and timing belts are in sync. The TOP RAIL has hard, equal stops; the bottom does not! Here is a link to the new ALL METAL air assist for the A40640! **tinyurl.com/nejeair40640*
I'm a bit confused, you state to syncronize the X axis stepper motors we push the X axis gantry to the top rail, yet in Buster Beagles two videos on this machine and also the Neje site it says we bring it down to the front rail. My machine is on route and expected any day soon so keen to clarify this.
@@davidadcock9421 It doesn't matter which side you bring it to, it only matters that it fully goes to one side or the other.
Hi my name is Jim Gangloff I'm a newbie. I bought this at a garage sale it has the Lazer that you have on this video. My problem is I don't know what software programs to use? My laptop is running windows 10 I tried to download the software from neje but all I get is a error that it's not responding what do I have to do it came with another Lazer also. Only thing I don't have is the shutoff. Is there anyway you can help me get this running? I paid $100 for its mounted on 3/4 piece of plywood all setup ready to go Thanks
No I can't, but you can use either Lightburn or LaserGRBL.
Have you thought of running another air line from your air manifold to blow on the stepper motor to help cool it?
No Merrill. Compressed air under normal conditions gets really hot, so that would make it worse.
Would the e80 neje 3 or 4 in the standard of the xtool and others hi end diod lasers.
I have a neje 2s master 30w. Would it be better to upgrade this one or just buy a new engraver. And if buying new would it be worth the price difference for the 4
I really couldn't say. You'll have to look at the reviews and compare them.
@@TheLouisianaHobbyGuy I have not seen any comparing.
Is the file you used for The Last Supper available to purchase somewhere? I'd like to make one. Thank you!
You can get it on Google without copyright for personal use Scott. artsandculture.google.com/
@@TheLouisianaHobbyGuy thank you.
How would you compare this to the LM3 and D1 pro 10w for a first machine?
While the fit and finish is not as polished on the 3Max, it is still what I would call a more versatile and professional machine with a solid module and more features.
@@TheLouisianaHobbyGuy thank you I appreciate the reply.
How close do you run your air nozzle to the material? I was running about 5mm clearance to the focal point and clogged the orifice w/ soot during an etch before a cut. I've added about 5mm more to the design but haven't printed it yet. Should air be ran when etching too or just cutting?
If the laser has AA I run it all the time to keep smoke and debris off the lens. If you're clogging at 5mm, you may not have enough air pressure.
@@TheLouisianaHobbyGuy it doesn't clog when it's on. I was running the mom's day project and it clogged from the engrave before the cut.🤦🏼
The orifice was only about 1.5mm though. 5mm clearance w/ 3mm product puts it too close to the heat anyway.
Hi Rich, I’ve watched parts of this review several times. You showed a Navy coin near the end that I have a question about. It had a reflective surface that made it look metallic. Is it metallic or made using the method in the recent coin video. Really liked the ‘shininess’. If it’s a wooden coin, what product was used for the finish? Thanks
@gbwsf it is 3mm acrylic
@@Cyphera59 Thanks, Did Rich show this on any videos? I don’t recall any acrylic though I may have missed it.
@@Jerry-Mesa th-cam.com/video/ZiisdxPfQUA/w-d-xo.html
It's black acrylic.
Hi rich
Thank for your videos .. every time happy to see the next video/tuto
About the acrylic coin. Do you have video on it or detail of the engraving/cutting params ?
Can you please review the CR Falcon 10W? Thank you.
Sorry, I don't have one.
I'd say the xTool with the 20 watt laser is hard to beat. I can actually CUT and engrave ceramic tile without anything sprayed on the tile. It's one very powerful laser. Makes the 10 watt look like a toy.
It also comes with a pretty big price tag Chuck! Different class laser.
Is it possible to add a relay to other lasers? I have Atomstack A5 I would like something like that added for my air pump.
If the control board has M7 & M8 you can Craig.
Hi rich,I cannot get my engraving speeds anywhere close to yours any ideas please
Not really... way to little information and very hard to answer in a few words. Try posting on my free forums. lahobbyguy.com/bb
Haven’t seen you do a review of the Xtool D1. Thoughts?
Eh... it's a diode laser! Nothing impressive for sure when you wipe off the lipstick marketing. Very hard company to work with. Poor response time and they really don't care to hear about the problems it has, which is supposed to be one of the reasons we do this. I have all the video done for the review, but it doesn't deserve any expediency, so when I get to it, I'll post it. It's shelved for right now.
in your video you run M7 and M8. No need to run both. in the next setting of LightBurn is to run one of them.The video is great, hats off to you. please excuse the use of a translator
I run both because they perform different functions.
I explained wrong. I thought air assist didn't need to be written in GCode. After setting, leave the option checked (implicit setting). See pictures in previous post. I learned this by accident. I'm a greenhorn. I'm learning how to control Lightburn from your videos.👍👍👍👍👍👍
Thank you Rich........still the best laser 2022??? I live New Zealand so any import is really expensive 😣😣😣😣
I would say it's a tie between this one and the Atezr...
I 100% blame Rich. This laser is on it's way as I type this comment. Lol
Awesome!
Wow. Great video.
I want that.
It could be for sale Lonnie! 😊
How would you say this compares to the sculpfun s10 with expansion kit?
I don't think any laser compares to the 3 Max which is fully featured and has the A40640 module. But that's your job Dave, to do the comparisons. I don't have the S10.
Great video review thank you!!
Thanks for watching!
How long did it take to do the last supper
About 11 hours Peter.
Wow laser power
That would make a good graphic! 🤪
Do you run the G-code version of Lightburn with the NEJE????????
Yes, Neje has a Gcode controller.
looks sweet!
Works even better Jason!
Hi Rich I have this model Neje (for about 2 weeks).I have connected the power box to the m7 and to my air pump ,I have put in the m7,m8 m9 in the g code settings, when I run a program to engrave then cut the air pump does not switch on when it starts to cut,I have the air assit switched on in the cut layer and off in the engrave layer. Do you have any idea where im going wrong
Are you sure they're plugged in right? I can't imagine that both the M7 & M8 are not working.
@@TheLouisianaHobbyGuy Hi Rich I think you Misunderstood my Question,I have the air pump connected to the control box and pluged into M7 when I do layer just to cut the air pump switches on OK. But when I have a Object with 2 layers,one layer being a fill layer and the other a cut layer when it runs the first layer the fill layer the pump does not start so when it start.s the cut layer the pump is still off .I hope this is a bit clearer.thanks peter
Ah, that's probably going to be a question to ask on the Lightburn Forum Peter. forum.lightburnsoftware.com/
@@TheLouisianaHobbyGuy Ok thanks Rich
Make me relay want to upgrade my 20watt input Ortur Laser Master 2. LOL
The 3 Max is a great laser!
Rich, can you add the file you used to 3D print the air assist for the NEJE A40640?
If I can find it. Neje sells a really nice metal air assist for the A40640.
@@TheLouisianaHobbyGuy Just bought it, I thought yours would be better. Thanks Rich. 🙂
I am heartbroken! I have to send mine back due to missing parts! But the replacement should be here by the 25th. I
That's too bad Robin! Hope the new one is better.
@@TheLouisianaHobbyGuy I hope so too. It should be here today. I hope. The xtool is a nightmare at this point.
Dear friend, what is your opinion about the module laser 20w output from atomstack (combined 4 laser) In front of the product of neje 3 max?
I have ortur laser master 2 Pro and I want to upgrade it to more powerful laser, I want your opinion because you're the best!
Thank you! I don't have the 20W quad diode so I can't give you an informed answer. But I do know that collimating 4 diodes is not going to give you the engraving detail that a 5 or 10W will because the spot size will be rectangular, and not square. I am extremely satisfied with almost any 5 or 10W for my diode engraving since I work mostly with hobby wood. Diode lasers are made for engraving, and for engraving, less is more. In fact, I still use my 3 year old 1.5W laser when I want really fine engravings on expensive pieces. What I look for is the spot size. You need the smallest spot and it needs to be square for really fine, professional engraving. You won't get that above 5W optical output, unless you get a really expensive USA made 7W single diode. If you need speed for cutting, then sure, go with the 20W, it will outperform any other diode laser for cutting, but I focus more on engraving.
@@TheLouisianaHobbyGuy I want to cut clear acrylic 2m and engrave styles steel
@@TheLouisianaHobbyGuy also I need something specific item to connect the neje module to my ortur? (Ortur 24v 2a)?
Yes, you would need the Neje Adapter board and another power supply for the 12V Neje. I would suggest you look at the new 10W module from Ortur.@@ציוןנעימי
@@TheLouisianaHobbyGuy after I see this video about neje I don't know what to buy, ortur 10w module or neje module, you think it's is possible to engrave or mark very well stylenss stainless steel?
Hi Rich
I got my neje laser 3 max im lost with the software im on a mac and need a driver i thought it was automatic with light burn but its not recognize .can you tell me what driver i need
Thanks 👍
No, sorry, I know absolutely ZERO about Macs! Try the Lightburn forum: forum.lightburnsoftware.com/
@@TheLouisianaHobbyGuy ok thanks everytime i run s project light burn freezes not even half way yes there a learning curve 👍
@@therambler3833 Not speaking from experience, but I read that there are USB issues with Macs (dropped data)
Wish I saw this vid before I bought the xtool D1
Their marketing is genius Patrick!
what thickness acrylic? and where do u get it from?
That's 3mm from Amazon.
Hi I want to engrave pu leather and microfiber for my business. What would be the best laser machine for me?
You can actually use any laser Jeffery, diode, Co2 or Fiber.
@@TheLouisianaHobbyGuy I was looking at the X1 Pro 20W, but am new to lasers.
Wait a few days, I have a new commercial 24W diode I'm testing right now that's worlds above the xT and less expensive! Review coming soon!
Have tried to set this machine up in lightburn. somehow it seems that the machine thinks its workspace is besides the actual worksite in lightburn. machne is trying to travel outside the workplatform. yes dimensions are typed in correctly. but laser cant find center of page or anything else. when moving it on the arrows. the laserhead moves correctly, left to left and right to right but the y axis moves opposite way as expected. when clicking down it moves up visa versa. cant get it ot run correctly.
You have to set the correct origin in Lightburn Harley. Edit --> Device Settings --> tic off top left.
@@TheLouisianaHobbyGuy Thanks. lemme try that. Just wondering my other machines running superb on lightburn, except of this one. I was about to bin it.
@@TheLouisianaHobbyGuy Ahmmmm. where did you set it on your Neje MAx 3 ?. mine is where i think it should be. top left tic. but it still runs opposite directions
Do you still not suggest the xtool? And does this have a 20 watt?
I don't suggest any lasers, and I have nothing against the x-Tool. I just don't personally like it. That doesn't mean you won't. Neje is about to launch a new 20W.
Thanks I ordered one from xtool on March third I believe and they keep saying they can’t ship because of covid.
Also thanks for the detailed help with lightburn I have really learned so much from you I’ve been binge watching you for awhile
Love the size but I will wait until they make improvement's 🙂
There's not much to improve. I doubt they'll be making any changes.