Gsr injector replacement fuel lag

Today I decided this long over due maintenance needed to be complete. After chasing a reoccurring CEL, where first my vtec wasn’t working. And my oxygen sensors where connected backward, replaced the vtec gasket and solenoid. Fuel pressure regulator, checked my plugs and wires and still had this lag in every gear and when vtec would hit it just wouldn’t hit and I’d accelerate very slowly….
Fuel injectors and air filter where the last things on my diagnostic check list before replacing the fuel pump. After replacing those I found a vtec code p1259 and a misfire code p0301. Reset the codes and took it for a drive and the problem was resolved. One of the injector was cracked on the tip probably leadings too incorrect flow.
Socials
@civicstar98
@ironclad_enterprises
@zerocoolslostempire
#california #gsr #civic #civicek #ek #ekhatch #hatchback #honda #Diy #local #civicstar98 #modified95

[@LuisAGuevara33]

Link to the hardware please 🤝

[@civicstar982]

www.ebay.com/itm/394169806907?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lDQdg7BwR-q&sssrc=2349624&ssuid=fTVD9u1WRLO&var=&widget_ver=artemis&media=COPY
This is the link for injectors I ordered stock replacements usually around 40-45 bucks. I think all B series ones are the same 240cc and the air filter was generic just had to make sure it had the right size hole. I had one but it was for the aem V2 CAI which has a much larger diameter then the regular short ram 💪🏾