Good vid. I’ve used one of those for about a year. I have 2 guitars with dual outputs, magnetic and piezo, and run the piezo into the IR then to PA to do just what you did and make it sound more like a true acoustic. Then the magnetic pickups output to an amp. I use a volume pedal to be able to switch between them live, so I can do something like start with an acoustic strum and then kick it into electric mode all with the same guitar. Super useful bit of tech.
You drop the vid at the moment where I consider this tool. I already have a captor, and I wondering if I can use this pedal after to use different IR to use it on stage. Dou you need a TRS cable or a TS to connect the captor to the pedal ? And after the pedal ? ... 🤔
You can definitely use it in that way. That’s exactly why how I’m using it at the moment in my studio. TRS-TRS cable between the Captor and pedal, then either TRS-TRS or TRS-XLR to mixing board/on stage snake etc. Works great!
Great vid. Nice quality pedal but is this only suitable for cab and amp sims or can I load any other 200ms WAV file in it with of pre existing guitar tone to use on stage?
To be honest I haven't noticed any. Admittedly, I wasn't looking out for it, but it hasn't been an issue do far. Next time I'll use it I'll listen out for it though and let you know.
Anyone know if it would possible to run a splitter at the end of my chain in my effects loop, sending one to the amps return and the other to this IR loader, which then would run out to a DI box for FOH/in ears.
Thanks for the vid! I question regarding when you said that slots 13 to something was supposed to use asa pedal paltform. is that mostly if you have a overdrive pedal which isnt like tweakable enough to be a preamp? because if you have a preamp pedal, all the usual IRs should be fine right?
Hey does anyone know how I can use one of these without having to put my amp on standby ? because what I want to do is do 1 track recorded sm57 on combo (room ambience) Then your second channel as like direct line from amp to interface thanks guys 🤟 Then other channel am wanting to put on is
I expected some sound design uses.... like loading the IR of another instrument, to experiment with timbre. Why? Are 200ms not enough or you just chose not to?
SADLY..... this pedal doesn't have a wet/dry mix ;-( if you want to use IRs to improve the sound of acoustic instruments with pickups, then you may blend your raw sounds with the sound from the IR. The Line 6 Helix IRs have a wet/dry, and the Axe Fx III has this feature as well. IRs are for so much more than just amp/cab simulations.
Good vid. I’ve used one of those for about a year. I have 2 guitars with dual outputs, magnetic and piezo, and run the piezo into the IR then to PA to do just what you did and make it sound more like a true acoustic. Then the magnetic pickups output to an amp. I use a volume pedal to be able to switch between them live, so I can do something like start with an acoustic strum and then kick it into electric mode all with the same guitar. Super useful bit of tech.
Great advice. Thanks
Great video buddy, never knew these pedals were a thing!
Thanks Andy! Not the most exciting purchase but definitely a really useful pedal to have around. 😊
You didn´t think of running a bass directly into it - it sounds fantastic. I think there are 5 bass cab responses, and I sold my MXR bass DI preamp.
You drop the vid at the moment where I consider this tool. I already have a captor, and I wondering if I can use this pedal after to use different IR to use it on stage.
Dou you need a TRS cable or a TS to connect the captor to the pedal ? And after the pedal ? ... 🤔
You can definitely use it in that way. That’s exactly why how I’m using it at the moment in my studio. TRS-TRS cable between the Captor and pedal, then either TRS-TRS or TRS-XLR to mixing board/on stage snake etc. Works great!
@@JakeLeighGuitar Oh great ! That's my next tool I think 😉🤘 Thank you !
whats the best output level to send into the IR Loader? Love the Pedal but the Manual doesnt give me much Info on this...
on bass?.. if so do i need to upload those responses from app of it?
Excelent explanatios! One question: if i have IR packs in format .WAV, i can sent them to the pedal ? Thanks so much
Yes
I've been wondering what sound would result from using one of the acoustic IR's with my 335. Has anyone tried that?
So can the chain be guitar-distortion/boost/overdrive-ir loader-interface-computer?
Great vid. Nice quality pedal but is this only suitable for cab and amp sims or can I load any other 200ms WAV file in it with of pre existing guitar tone to use on stage?
You can load instrument body IRs, too, like those from 3 Sigma Audio
@@joebowbeer great to hear really..it makes sense it's not just cab and amp sims eh
How is the latency with this pedal? One review mentioned it negatively but didn't elaborate.
To be honest I haven't noticed any. Admittedly, I wasn't looking out for it, but it hasn't been an issue do far. Next time I'll use it I'll listen out for it though and let you know.
@JakeLeighGuitar thank you, great to hear
@@JakeLeighGuitar Hello! Which latency it have? It's easy and need 5 minute, strange that nobody tell about one of the main paramers
Mate can I load my own ir's into it via android phone? Also can I use the pedals head simulators with my own ir's? Cheers
Thank you
Anyone know if it would possible to run a splitter at the end of my chain in my effects loop, sending one to the amps return and the other to this IR loader, which then would run out to a DI box for FOH/in ears.
Thanks for the vid! I question regarding when you said that slots 13 to something was supposed to use asa pedal paltform. is that mostly if you have a overdrive pedal which isnt like tweakable enough to be a preamp? because if you have a preamp pedal, all the usual IRs should be fine right?
Did you ever find the answer to this?
@@ElliotCole333 no
Hey does anyone know how I can use one of these without having to put my amp on standby ? because what I want to do is do 1 track recorded sm57 on combo (room ambience)
Then your second channel as like direct line from amp to interface thanks guys 🤟
Then other channel am wanting to put on is
and how would you compare it to the moer ca x2?
I expected some sound design uses.... like loading the IR of another instrument, to experiment with timbre. Why? Are 200ms not enough or you just chose not to?
SADLY..... this pedal doesn't have a wet/dry mix ;-( if you want to use IRs to improve the sound of acoustic instruments with pickups, then you may blend your raw sounds with the sound from the IR. The Line 6 Helix IRs have a wet/dry, and the Axe Fx III has this feature as well. IRs are for so much more than just amp/cab simulations.