Awesome video for ones without Bluetooth adapter!!!! That's a lot to figure out! And I noticed the software looks totally different on PC. It looks easier to program. Thanks for the feedback
I just bought a bike with Dane set up sitting 3 years, I know nothing about electric bikes, but now that I charged my motorcycle I don’t get any power to my wheel, do you think if I bought the usb adapter and went through this process it might fix my bike and give power to the rear wheel? Please advise and help thank you
Thanks for the handy vid, however i do not understand how to connect the male 4 pin connector (same as in your vid) to A USB port as they are different colour wires and in your video you have 3 wires in the connector, I have 4 wires on my fardriver controller connector and there are 4 wires on the USB cable of different colours. so i am confused and stuck with how to proceed. PLZ HELP!
I am using Bluetooth to connect with FarDriver Controller. But I have a power supply 72V-20A to supply for Motor Controller. Can I run Autolearn in FarDriver App?
Right now!! I have $6.5K invested. This price will eventually go up even higher when it's time to replace the battery. This new controller is battery amp hungry so I'll need to build another battery to satisfy it's hunger. But overall a great investment beats $5 a gallon for gas. Cost me less than $3 to charge it and Im getting about 50 miles before I'm charging again. Even then I have 1/4 battery left.
Hi friend I do have a problem with my pc program it comes in a graph and when I connect the pc to the pc it won't connect or get out of the graph screen. Do you know anything about that?
hello I have a problem with my far driver nd 72360 I have a qs 138 when I do the self-learning the motor does not turn in the right direction what should I do?
Not if you have the power cord connected properly. It should keep the existing setting programmed into memory. Make sure you save settings after you Auto program. That locks whatever settings you selected in. Good luck!
@@robfleischer6261 "I can't get it to connect to my Bluetooth." Did you buy the Bluetooth dongle, which is sold separately? If you didn't buy it, then that would explain why you can't find the controller.
If you follow the instructions you should be able to connect using the USB cable. It works exactly as I've shown. I would check to make sure the controller/USB cable is recognized.
Hello, by any chance, did you plan to release the video expleining the setting and how to set it up correctly ? I'm really lost about some of thoses, among them are : Weak feature, i dont know what it can be. / PID: My default setting after auto learn doesnt match the doc provided, and i'm a bit afraid of damaging my motor or controller, i dont know which one to choose among the 15 provided tbh) / and pretty much all the fonctions panel, i'm lost about what does what and the difference between speedpulse and accpara .. If you or someone have any lead on where to search for a video explaining this, i would really appreaciate !
Awesome video for ones without Bluetooth adapter!!!! That's a lot to figure out! And I noticed the software looks totally different on PC. It looks easier to program. Thanks for the feedback
Good work look forward to the next video! 👌🏿
Hi great video, Could you share the software ver.45 file? In google drive seems to have only 16 and 21 version.
I noticed that also
Great video man!! 🎉🎉
is the usb cable of votol controller same with fardriver controller? can i use it on both controller?
I just bought a bike with Dane set up sitting 3 years, I know nothing about electric bikes, but now that I charged my motorcycle I don’t get any power to my wheel, do you think if I bought the usb adapter and went through this process it might fix my bike and give power to the rear wheel? Please advise and help thank you
What colours are what on the throttle you used? I have the same one.. love your videos
Excellent
Thx for the files...which one exactly do you use for programming on the computer? There are a lot of files in the link you posted. Thx
can i get a link to that cable. i have no idea where to get that
hello I have the same driver, super soca also does not work, it gives a throttle error, there is no electricity to the phases
will share link or download software
Thanks for the handy vid, however i do not understand how to connect the male 4 pin connector (same as in your vid) to A USB port as they are different colour wires and in your video you have 3 wires in the connector, I have 4 wires on my fardriver controller connector and there are 4 wires on the USB cable of different colours. so i am confused and stuck with how to proceed. PLZ HELP!
Hi, I have a throotle error on controler, how reset controler u know?
Do you use a precharge resistor with fardriver controller?
How many amps is your battery?
I am using Bluetooth to connect with FarDriver Controller. But I have a power supply 72V-20A to supply for Motor Controller. Can I run Autolearn in FarDriver App?
It's not showing USB com port. Fardriver 680
I tried it with moto english 38 , 21 and 45 and i can still not recieve frames
Whats the issue? Running windows 11
How much did it cost u to build ur bike?
Right now!! I have $6.5K invested. This price will eventually go up even higher when it's time to replace the battery. This new controller is battery amp hungry so I'll need to build another battery to satisfy it's hunger. But overall a great investment beats $5 a gallon for gas. Cost me less than $3 to charge it and Im getting about 50 miles before I'm charging again. Even then I have 1/4 battery left.
Hi friend I do have a problem with my pc program it comes in a graph and when I connect the pc to the pc it won't connect or get out of the graph screen. Do you know anything about that?
There is no program version 45 in your archive, there are only 16 and 21.
But it's better than nothing, thanks.
Hi how much was your controller?
It came up to $850 with shipping included
@@FlyHighforfun where do you buy it and are there other models available?
I can’t get mine to work at all !! Do you need Wi-Fi?
I don’t know if you’ll be able to send me the software
hi sir can i ask about the program, what is the best program for nanjing 72240 with acid battery 30A?
hello I have a problem with my far driver nd 72360 I have a qs 138 when I do the self-learning the motor does not turn in the right direction what should I do?
go to parameter and you will see a field called direction, changing this setting from whatever it's set to (1 or 0) will reverse the motor direction
@@rpw0311 ok thank you in fact I couldn't modify this parameter because of a problem with self-learning it's ok it works✌🏻
Does that controller put out 800A on the battery amps and 1800A on the phase?? Can you battery cells handle that power?
@Azkmienirul Saufik how do u know?
@Azkmienirul Saufik but you can run without bms or bypass duscharge
@Azkmienirul Saufik i can monitor the cells on my phone app...no problem about that
Where can i purchase the usb cable?
USB cable usually comes with the controller
or just buy a USB to Serial cable
Do you have to autotune every time you unplug the battery?
Not if you have the power cord connected properly. It should keep the existing setting programmed into memory. Make sure you save settings after you Auto program. That locks whatever settings you selected in. Good luck!
Does anyone know where to find the app for Android? I'm having issues can only find it to suit Apple?
Fardriver app for Android? It's called Motornet. It can be found in the Google play store!
Thanks I did find it but I can't get it to connect to my Bluetooth 😐.I also have the PC cable but the PC can't find the controller either?
@@robfleischer6261 "I can't get it to connect to my Bluetooth."
Did you buy the Bluetooth dongle, which is sold separately?
If you didn't buy it, then that would explain why you can't find the controller.
If you follow the instructions you should be able to connect using the USB cable. It works exactly as I've shown. I would check to make sure the controller/USB cable is recognized.
@@FlyHighforfun Yeah that's my problem both my phone and PC can't find the controller 😐
Hello, by any chance, did you plan to release the video expleining the setting and how to set it up correctly ?
I'm really lost about some of thoses, among them are : Weak feature, i dont know what it can be. / PID: My default setting after auto learn doesnt match the doc provided, and i'm a bit afraid of damaging my motor or controller, i dont know which one to choose among the 15 provided tbh) / and pretty much all the fonctions panel, i'm lost about what does what and the difference between speedpulse and accpara ..
If you or someone have any lead on where to search for a video explaining this, i would really appreaciate !
Wish u lived in NJ so u can help with my motorcycle
How did you connect the ct22 display ??? Got any tips or wiring diagrams
I'm on Facebook.. Monroe Austin. Send me a message and I'll send it, or help best I can.
There's so many monroe austin account, i can't find wich the real one
so many typos and mistakes in the software..
Terrible controller! It don't have hill hold controller. 300$ with no hill hold control. It badger than Votol, don't buy it.