Hey man sometimes not chasing crazy speeds is the best way saves money saves your bike, maybe your life and wont bring the haters i respect that! In this persuit of tryinmg to make my bike fast because im trying to represent My Brand brings Haters from Far and near! WTF Thats what im supposed to be doing here trying to go fast!
Right now it’s the sabvotan because I like pedal assist. I would like to get either far driver or bac if I can figure out how to also have pedal assist
I love pedal assist to, to be honest. Idk why they don't put pedal assist on these high power controllers I think that's a great feature I don't blame you for that
Hey Chris another great video buddy you always have great content and always great information. Love the Beast looking good. Thanks for the video buddy.
I really appreciate your snippet off the student always comes for the teacher, ( public enemys don't believe the hype) your creative spirit is impeccable ! Mad respect Dr Chriscrosswire 👑
Thanks bro unfortunately I had to repost it over again, I always appreciate your support. In the eyes of new coomers I may appear arrogant but thats confidence and Im normally always slightly irritated by the BS I gotta come clean up in my comment section. Im gonna start leaving it as hoestly Its not worth my time. its always the ones not even in the game doing the shat talking! Wannabes!
I will donate one day cos you really got that ability to break down fantastic information, specially when it comes to when I install my bac 8000, and my Daly 500a BMS ,( I don't understand what the BMS does) but it must be able to handle the hi amps !
BMS is basically for safety of the battery. You can set a AMP/voltage limit for charging and discharging so it will cut off if you go above or below those limits. so it saves the battery from draining too much and dying, or overcharging/overdischarging which leads to overheating/damage. Also some BMS have balancers with them which will balanec the cells to have same voltage. And most which have those features comes with bluetooth and an app where you can monitor and set every setting.
Beautiful bike my bruh. I have been following for a few months. Got the Garmata for my Enduro and you were right, it is an excellent seat. Love your advice and content. Have you done any group rides with your beast?
Naw not with this one My Gen 1 but that was astandard Sabvaton 72150 and NB pwr pack but crazy thing is while that was in 2022, at the time that was pretty much faster than anything at that point. Guys have made serious upgrades since2022 and so have I. I know I’ve help make wanting a seriously fast Emoto a goal for a lot of folk
Hello. Great Video. I learned alot. I bought the mud guard like the one you have and it doesn't fit without the mud guard bracket like you have. Could you help me find a mudguard bracket like yours? Thank you in advance for your help and I look forward to seeing more of your videos.
Hi Dr Chrischrosswire, I got some batterys that doesn't need welding ! They are C020B lithium ion polymer (40ah) I got 50 of them , they read 4v on my tester, but they are flat, I want a 100v battery is it possible?
@@STuTe51 If I built this bike from scratch why wouldn’t I be able to run anything although I’ve never put a fardriver on the Beast what an insult, lol
Hello my friend, i want to work as a delivery on ireland. how long does this bikes battery can last. and can i help the economizing battery using my legs?
Bro with the battery that I have you won’t need to help this battery I guarantee I get 100 miles hard riding so cruising I can’t see anyone killing this battery in a day
@@tannato4864 First I d have to know what a Euro was lol Ive got abot 8K in this bike and thats with me Building My own battery which would be the most important and expensive part. 20S16P with Custom Copper Busbars and this pack was built for high current meaning heavyduty everything
I haven’t looked into the full details of those controllers, but I would bet a powerball ticket on the fact that their are cheaper utilitarian controllers that are far cheaper and yet undiscovered being used right now in China. VESC controls seems like the driving force for development, minus the product placement. I like the shifting glitch camera work like you meant to do it.😀
@ChrisCrossingWires1212 I don't know about that. On the one hand, it can be a great controller. On the other, it can be a piece of junk. If you are adept enough to design and order your boards following the specs - that's great. If you're ordering a pre built controller, your options that tend to be cheap and nasty, or expensive and pretty decent. While I like the idea of open source and vesc is well written and developed, this introduces a couple of problems: Anyone can do an implementation to whatever degree of quality they choose, and there is not much the author can do about it. It also sliced up an already small market, making it difficult for parties to make a profit and offer a quality product. Potential manufacturers would have to be reluctant to start producing the product. Buyers do not benefit from economy of scale as they would if there was one company.
How do you want It !!!!!!! 👍 Dr Chrischrosswire you done did it again ! I really dig your channel your the realest ! And your education is the absolute best, I look at other E-bike mod channels but your in a class of your own ! Respect to the maximum 👑💪👊
So let me be clear In not telling anyone that they should use a BAC over a Fardriver. I said what is your chioce.This is my reason for why I'm not switching to a Fardriver. That's because someone told me a should change to a Fardriver, in my opinion that would be a downgrade for me. By any means do you these are my opinions and my opinions only. What I eat won't make you shit! You like bologna, I like ham simple or maybe I’m bologna and you ham, nope. This is Chriscrossingwires ch. This is what I'm doing and what I believe. I'm not Ebike Lord this is my thoughts and experiences only. I started off with a yuandai $45 controller that controller was awesome. This BAC is awesome That's what I'm using
interesting coming from a 60 year old man shooting paintball guns. Lets both agree to not give a fk about either! simple btw since you been posting for a year now and have 130 subs it appears you have even less substance lmao
well with 130 subs your not getting paid from youtube obviously or gaining any sub and 30? You must have had a rough life my guy DAM! smh You could certainly pass for my grandpa and Im 52 wtf? and you love dick? did I hear that right yeah be fking gone!
asi is technology research created by the Canadian military their stuff is produced in Vietnam . im sure its somehow better and smoother ASI put me off how people sell it with a software package and you have to use some third party app like kilowatt. just a really weird distribution system that some how puts me off they dont have a 96v controller unfortunately. im sure the nd1081800 track with 1200 line amps is much faster than anything ASI make
I agree I wish it were capable of 96v but the fact you are comparing a controller that needs 1200dc line amps to beat asi's 450 speaks volumes. Where are you going to get 1200dc line amps from?
@@ChrisCrossingWires1212 ND962600 makes 1500 line amps, expensive though. and Ive seen these very high end fardriver controllers on sportbikes going 160mph+ a controller isnt about raw power though of course.
Bro I'm so glad that I used that BAC and didn't go with what I was thinking back then. You live and you learn. You know I think was talking to you in the life stream from back then
I dont think this is a fair comparison tbh. 72680 is a 200$ controller and BAC is 900$+. For 600$ you can get ND721800 which can hit 60Kw battery amps.
Greetings, CCW. I am a real follower of your work and must say, that's a nice looking bike.
Hey, thanks!
My setup is cheap Stealth clone, QS 205V3 5T, 72 volt with 80 amp YYK controller. Cheap and so far 2 years worth of reliable.
Hey man sometimes not chasing crazy speeds is the best way saves money saves your bike, maybe your life and wont bring the haters i respect that! In this persuit of tryinmg to make my bike fast because im trying to represent My Brand brings Haters from Far and near! WTF Thats what im supposed to be doing here trying to go fast!
Right now it’s the sabvotan because I like pedal assist. I would like to get either far driver or bac if I can figure out how to also have pedal assist
I love pedal assist to, to be honest. Idk why they don't put pedal assist on these high power controllers I think that's a great feature I don't blame you for that
Hey Chris another great video buddy you always have great content and always great information. Love the Beast looking good. Thanks for the video buddy.
I need that seat where did you get it from?
I have the same one. It is a GARMATA seat. A good seat!
I'm rebuilding my cab recon I'm a need some help get the wire right and a battery charger need a clam for the box I got a bac8000 in mine
I really appreciate your snippet off the student always comes for the teacher, ( public enemys don't believe the hype) your creative spirit is impeccable ! Mad respect Dr Chriscrosswire 👑
Thanks bro unfortunately I had to repost it over again, I always appreciate your support. In the eyes of new coomers I may appear arrogant but thats confidence and Im normally always slightly irritated by the BS I gotta come clean up in my comment section. Im gonna start leaving it as hoestly Its not worth my time. its always the ones not even in the game doing the shat talking! Wannabes!
I will donate one day cos you really got that ability to break down fantastic information, specially when it comes to when I install my bac 8000, and my Daly 500a BMS ,( I don't understand what the BMS does) but it must be able to handle the hi amps !
BMS is basically for safety of the battery. You can set a AMP/voltage limit for charging and discharging so it will cut off if you go above or below those limits. so it saves the battery from draining too much and dying, or overcharging/overdischarging which leads to overheating/damage. Also some BMS have balancers with them which will balanec the cells to have same voltage. And most which have those features comes with bluetooth and an app where you can monitor and set every setting.
Beautiful bike my bruh. I have been following for a few months. Got the Garmata for my Enduro and you were right, it is an excellent seat. Love your advice and content. Have you done any group rides with your beast?
Naw not with this one My Gen 1 but that was astandard Sabvaton 72150 and NB pwr pack but crazy thing is while that was in 2022, at the time that was pretty much faster than anything at that point. Guys have made serious upgrades since2022 and so have I. I know I’ve help make wanting a seriously fast Emoto a goal for a lot of folk
Hello. Great Video. I learned alot. I bought the mud guard like the one you have and it doesn't fit without the mud guard bracket like you have. Could you help me find a mudguard bracket like yours? Thank you in advance for your help and I look forward to seeing more of your videos.
Hi Dr Chrischrosswire, I got some batterys that doesn't need welding ! They are C020B lithium ion polymer (40ah) I got 50 of them , they read 4v on my tester, but they are flat, I want a 100v battery is it possible?
Sounds like got enough to make 2 I'm not sure how large the bsm
ea physically but capacity wis e and a pm
How did you switch from FarDriver to ASI 8000 wiring harness?
@@STuTe51 If I built this bike from scratch why wouldn’t I be able to run anything although I’ve never put a fardriver on the Beast what an insult, lol
Hello my friend, i want to work as a delivery on ireland. how long does this bikes battery can last. and can i help the economizing battery using my legs?
Bro with the battery that I have you won’t need to help this battery I guarantee I get 100 miles hard riding so cruising I can’t see anyone killing this battery in a day
@@ChrisCrossingWires1212 thats very good to no. Do you know how many EUROS a bike like your would cost?
@@tannato4864 First I d have to know what a Euro was lol Ive got abot 8K in this bike and thats with me Building My own battery which would be the most important and expensive part. 20S16P with Custom Copper Busbars and this pack was built for high current meaning heavyduty everything
I haven’t looked into the full details of those controllers, but I would bet a powerball ticket on the fact that their are cheaper utilitarian controllers that are far cheaper and yet undiscovered being used right now in China. VESC controls seems like the driving force for development, minus the product placement.
I like the shifting glitch camera work like you meant to do it.😀
My battery door was not on so I think battery was loose not on purpose I’m sure irritating .
VESC is definitely the future
@@ChrisCrossingWires1212 It was a interesting effect if not intended…
@ChrisCrossingWires1212 I don't know about that.
On the one hand, it can be a great controller.
On the other, it can be a piece of junk.
If you are adept enough to design and order your boards following the specs - that's great.
If you're ordering a pre built controller, your options that tend to be cheap and nasty, or expensive and pretty decent.
While I like the idea of open source and vesc is well written and developed, this introduces a couple of problems:
Anyone can do an implementation to whatever degree of quality they choose, and there is not much the author can do about it.
It also sliced up an already small market, making it difficult for parties to make a profit and offer a quality product.
Potential manufacturers would have to be reluctant to start producing the product.
Buyers do not benefit from economy of scale as they would if there was one company.
How do you want It !!!!!!! 👍 Dr Chrischrosswire you done did it again ! I really dig your channel your the realest ! And your education is the absolute best, I look at other E-bike mod channels but your in a class of your own ! Respect to the maximum 👑💪👊
So let me be clear In not telling anyone that they should use a BAC over a Fardriver. I said what is your chioce.This is my reason for why I'm not switching to a Fardriver. That's because someone told me a should change to a Fardriver, in my opinion that would be a downgrade for me. By any means do you these are my opinions and my opinions only. What I eat won't make you shit! You like bologna, I like ham simple or maybe I’m bologna and you ham, nope. This is Chriscrossingwires ch. This is what I'm doing and what I believe. I'm not Ebike Lord this is my thoughts and experiences only. I started off with a yuandai $45 controller that controller was awesome. This BAC is awesome That's what I'm using
Where you get the rear mudguard
actually from a friend but its a motorcycle motorcross mudguard I modded slightly to fit
Can’t do it. 3 and a half minutes and nothing of substance. I just keep pitching a 58 yr old homeless man that’s into e-bikes
interesting coming from a 60 year old man shooting paintball guns. Lets both agree to not give a fk about either! simple btw since you been posting for a year now and have 130 subs it appears you have even less substance lmao
well with 130 subs your not getting paid from youtube obviously or gaining any sub and 30? You must have had a rough life my guy DAM! smh You could certainly pass for my grandpa and Im 52 wtf? and you love dick? did I hear that right yeah be fking gone!
asi is technology research created by the Canadian military their stuff is produced in Vietnam .
im sure its somehow better and smoother
ASI put me off how people sell it with a software package and you have to use some third party app like kilowatt.
just a really weird distribution system that some how puts me off
they dont have a 96v controller unfortunately.
im sure the nd1081800 track with 1200 line amps is much faster than anything ASI make
ASIs do go on fire a lot the proof is there on youtube many peoples start burning
I agree I wish it were capable of 96v but the fact you are comparing a controller that needs 1200dc line amps to beat asi's 450 speaks volumes. Where are you going to get 1200dc line amps from?
@@ChrisCrossingWires1212 ND962600 makes 1500 line amps, expensive though.
and Ive seen these very high end fardriver controllers on sportbikes going 160mph+
a controller isnt about raw power though of course.
As a Fardriver runner i can testify they are cheap and the app is hella nightmare issues...
Bro I'm so glad that I used that BAC and didn't go with what I was thinking back then. You live and you learn. You know I think was talking to you in the life stream from back then
I dont think this is a fair comparison tbh. 72680 is a 200$ controller and BAC is 900$+. For 600$ you can get ND721800 which can hit 60Kw battery amps.