Raised Panel Cabinet Door From Router Bits - 295
ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2018
- A couple of things...
- Article for this video: jayscustomcreations.com/2018/...
- This is the bit set I used: amzn.to/2CAoXdF
- Link to the router lift build video: • Lever Router Lift - Ve...
- When using the raised panel bit the dust collection wasn't as effective. I'm not sure if that's because the large amount of material being removed, the feed rate, the sliding fence pieces, or if I need to block off the extra air space next to the router. Either way, it's the only bit I've used in the setup where dust collection was not almost 100% effective.
- Have a great day.
----------
Want to help support what I do? Here's what you can do:
Buy a Plan: goo.gl/L7wNIF
Social links:
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86
---------- Project plans: jayscustomcreations.com/plans/
Tools in my shop (affiliate links):
Bandsaw - amzn.to/2gMHrjd
Bevel gauge (t-bevel) - amzn.to/2eYLB2N
Bluetooth adapter - amzn.to/1GDYgFl
Dado blade - amzn.to/210w6ex
Dewalt planer - amzn.to/1IGqVoz
Dewalt sander - amzn.to/1IGt0B6
Dewalt countersink - amzn.to/1ThxZQi
Dewalt trim router - amzn.to/2istJn9
Dovetail gauge - amzn.to/2bJpxIi
Eclipse quick release vise - amzn.to/1PUkyEW
Engineer square - amzn.to/2bqS0lA
Festool Domino - amzn.to/1IGrQ8u
Forstner bit - amzn.to/2fMph1z
Glu-Bot glue bottle - amzn.to/1LrKulZ
Gyokucho 372 japanese pull saw - amzn.to/1TgnE9i
Irwin Marples 10" blade - amzn.to/1klkIIr
Kreg K4 - amzn.to/1V4LTGM
Kreg DB210 pocket hole machine - amzn.to/1pFvmwU
Kreg Mini - amzn.to/1phH3cQ
Marble router bit or drill bit - bit.ly/1HIAZCA
Megapro NAS Driver - amzn.to/1OH8H8v
Milwaukee plunge router - amzn.to/2gSr5Ci
Mp3 earmuffs - amzn.to/1RF5CZq
Narex marking knife - amzn.to/2ciT7K2
Ridgid miter saw - amzn.to/2h0Xf2s
Router Lift Router - amzn.to/2zVUV2L
Rustic pine Briwax - amzn.to/1EnC0Jg
Ryobi 18v brad nailer - amzn.to/1Q3zZdG
SawStop titanium series blade - amzn.to/1OQUXbr
Scraper BAHCO - amzn.to/1PTR4Ie
12" speed square - amzn.to/1QY7BKg
Spiral router bits - amzn.to/2BnOINX
T-bevel (bevel gauge) - amzn.to/2eYLB2N
Table top hold down clips - amzn.to/2oP1wtw
Tudor brown briwax - amzn.to/1TnDPxC
Wax brush wheel for drill - amzn.to/1PtRYLi
Wood glue - amzn.to/1lZOwfc
Woodriver #4-1/2 - amzn.to/24pY95R
Woodriver #62 - amzn.to/22aF3F0
Social links:
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86
Mailing Address:
PO Box 33
Mathiston, MS 39752
Want to help support what I do? Here's what you can do:
Buy a Plan: goo.gl/L7wNIF
Patreon: / jaybates - แนวปฏิบัติและการใช้ชีวิต
A couple of things...
- Article for this video: jayscustomcreations.com/2018/01/cabinet-doors-from-router-bits/
- This is the bit set I used: amzn.to/2CAoXdF
- Link to the router lift build video: th-cam.com/video/2WyOskBpz_k/w-d-xo.html
- When using the raised panel bit the dust collection wasn't as effective. I'm not sure if that's because the large amount of material being removed, the feed rate, the sliding fence pieces, or if I need to block off the extra air space next to the router. Either way, it's the only bit I've used in the setup where dust collection was not almost 100% effective.
- Have a great day.
Very informational video Jay! I enjoyed it!
I like your Router table out the ones I've seen made.Nice setup!What kind of wood is that on the door?
Jay. I have watched many TH-cam videos on this same subject of making a cabinet door. This is by far the best one that I have seen. It was clearly explained ( even when you made a misstatement, it was corrected) in both your math as well as the set up and process in the cutting of the parts. Thank you for doing a great job.... again.
When I glue up raised panel doors like this, I like to put one coat of finish on the panel by itself before assembly. It allows the panel to move a little more smoothly with expansion and contraction, as well as not leave the “finish line” exposing bare wood with movement. It also makes it a little easier to clean up the glue, not having to work so hard getting all the “nooks and crannies” cleaned out.
Loved this vid, great explanations all the way around Jay.
I have never seen a more helpful/informational video in my life. Incredibly well done. Thank you!
I enjoyed you doing the paper version and your thought process of the measurements. Thanks for sharing
Wow I thought I had seen some GREAT VIDEOS, but this one topped em all. most of which happened to be yours. I loved the way you showed just how easy it is to make even the smallest adjustment to the height of the router. I am no where near ready to start making panel doors of any kind but when i get to that point there will be NO FEAR! you removed all of that, if nothing else I totally understand the planning it out part. THANKS JAY for all you do and say.
Love the special effects with two Jays at one time. One Jay standing on the side explaining what the other Jay is doing on the table saw.
Awesome video I’ve never made frame and panel doors before so this was a great tutorial on using these sets of router bits and as far as I can see dialing in the router is sweet.
Thank you so much!!! This video really helped me. I always struggle with math and layout. I especially like how you wrote everything out on a scratch pad and showed the math. Please show more steps like that in your future builds. Your router table and lift is awesome!
Love it. Can't wait to build myself a router table with a lift like that. I like your breakdown on figuring out your pre-cuts. Obviously people learn this early on, but it's nice to provide help for new enthusiasts.
This is the best tutorial on the construction of a raised panel door that I've seen.
Thanks for doing so many videos that we "weekend woodworkers" can use and relate to.
Awesome video! Really enjoyed that you took the time to explain how you found the measurements of the various pieces and the cut list. Cheers from France !
Just an exceptional "how-to" video of seting raised panel cabinet door router bits. Thanks Jay.
I have watched this about 1000 times and just this morning I went out and made my first door. You made it so easy. Thank you for the superb instruction
yup.. youhave to watch it like a 100 times to fully understand how to adjust the heigth of these router bits,, they are a bit tricky
This was very helpful. When I bought my router I made sure to get one that I could do cabinetry on knowing that I would want to in the future. I hadn't made the investment in the bits yet. But last night someone gifted me a set they bought, used once (I think) and haven't touched since. When I did a search I was super happy to find that you made this video. I know I can always count on learning from your videos. Thanks for sharing this! I can't wait to use my new bits.
Jay, this was a great video! I am going to be making my first raised panel doors, soon and your video is exactly what I need to do the job right. I realized, too that I need different router bits to make that happen as I bought the ones I now have before having all this information. You explain everything very well and I will watch this a couple more times before I start the project. Also, the nuns I grew up with in Catholic grade school would be very proud of you for catching the "actuality" correction in your final statement. Thanks, again for a superb demonstration! Dave
Absolutely Awesome Jay! I'm 62, retired, and in the process of gutting a cheap Delta shaper table and adding a router lift for a Porter Cable 7519. I've enjoyed woodworking as a hobby and You are truly inspiring. I used to train in another mechanical field and would have hired you in a heartbeat for your excellent organization, engineering and training skills! Thanks so much for sharing your time and inspiring us!
Beautiful Jay. The box sled is genius!! Loved the math and drawing to figure things up. My hero!
Jay, I am half way though a 25 door re-do of my kitchen using a cheap bit set from Amazon and your router lift xl. It has been so darn nice to have the lift. Ease of bit change, adjustment, and dust collection has made the job so fun. My old cabinets belonged in a 1960's camp trailer. Now I have new flat panel shaker doors that look awesome.
Great timing on this video. I was just starting on a project that has raised panel doors. Looks like I might be building a new router table, very nice.
Thank you. I appreciate your videos. You should be a teacher. You are thorough in your explanations, and your tutorials are easy to follow. Thanks for being THAT GOOD☺☺☺☺!!!!
This video was easy to follow even for a novice woodworker as myself. For those more experienced (or perhaps for those of us just beginning) maybe Jay can demonstrate how he built his adjustable router mechanism. Jay's videos are always well done. Cheers!
And of course it helps to look at all links before you post public comments. Doh! 😏👍🏻
Great video, you made it look easy. I have to make a few doors and was a little leery of trying raised panels but you gave me confidence. You are a great teacher, you explain everything so clearly. Thank you!
Thanks, Jay. That sure was a lot easier than I always figured it would be.
And if you’re sick of all that hickory in your shop, I’m more than happy to take it off of your hands. 😊
Another great and informative video from you Jay. I like seeing the layout process on paper for a change.
You demonstrated this very clearly, but I can 100% back you up on the ease of micro adjustment with your router lift. I just finished building mine from your fantastic set of plans and I am very happy with how it turned out. It was dead simple to build, and it works great. Also, after seeing how nicely the PC 75182 swings that big panel bit, I’m glad I went with that beast of a router.
Nice! Thanks for the feedback. Yeah, that router is incredible.
Glad to have watched this. I have just bought a set of six cutters and three of them are for the doors on cabinets similar to what you machined. The other cutters are a drawer lock joint, a cutter to make a glue joint for the panel and another for a door lip. Your test backer glued up door is a must for these big cutters, so thank you for sharing I will be using your method.
Thanks for the upload! My wife picked me up this same set of bits for Christmas from a tool sale, your timing couldn’t be better. :)
You're lucky Sir👍
This has to be one of the finest how-to videos I have ever seen. You are not only an amazing woodworker, but also an excellent teacher. Your creativity is inspiring. And it is also nice to have a twin cleaning up in the background ;). Well done, and thank you.
I really appreciate how you take the time to explain things. I've probably learned more from your channel than any other.
As usual making the difficult easy....Well done Jay!!!
That was a good video, Jay. It addressed what I had been wondering myself. I did envision the same type of micro adjusting of the bit and it was great to see my thoughts in action. Thank you for the post!
Really enjoyed this video. I recently purchased this set and is preparing to use it. Thank you for the detailed process.
Great great video. I appreciate the way you explain how to determine the size bds to use for all three components. I agree with your thoughts on naming the bits. I think most people understand tongue and groove as opposed to the way they are named. Keep the great videos coming!
Thanks for this video man! I just bought the Bosch bits and haven’t done a cabinet door before.
Jay, Once again you have done a very nice job at explaining the process in doing the raised panel door cabinet door.
Very well done video Jay. Your teaching skills continue to improve.
Thanks a lot Jay, This is the best video about using this kind of router bits I've ever seen. Clear and well explained, thanks again.
Nice work as always, really appreciating your videos lately as they have been extremely instructional on basic methods but thoroughly explained in well illustrated terms. Love the little cross routing sled, I'm gonna make one myself.
Best set up video on raised panels I've seen. Thanks again Jay!!
I love that adjustment deal you have. That can be more accurate that a digital one. It's all in the feel of it.
This is a great video for first timers such as myself. Clear and easy to follow. Was looking for a descent set of bits and your choice also helped. Thanks and great job!!!
Excellent video, Jay! I have a couple panel bit sets that my Dad gave me that this will definitely help with future door projects!
Great video!! The explanation was excellent and easy to understand and follow. I have seen door making kits and wondered how easy they are to use. I had it in my head you had to be a expert cabinet maker I guess I was wrong.
Very nicely done video. I just got my first set of router blades to do the raised panels and was working with them today. I had a few issues which were driving me crazy and which I finally figured out. I wish I had seen your video first and I am sure that the afternoon would have gone easier. Thank you for the video.
thanks so much for putting this video together for us amateurs. Great video easy to follow easy to understand. Im looking forward on making some doors just like you made thanks again
I love watching woodworking videos. Thanks for sharing.
Excellent video. I've had a set of panel cutters for about 5 years. I may actually get around to using them. Thanks
One of the best door making tutorials ive seen. And that square pusher looks great! Thanks
Awesome video Jay. Thanks for the clear explanations on everything!
Jay, thanks for the great video. Clear concise and well explained. Really good. Thank you.
Great demonstration Jay, can't wait to try this myself!
Excellent job Jay, thanks for taking the time!
You just took the intimidation out of that!! Thanks Jay!!
It's super easy. Give it a try!
Jay Bates I believe I will!! 👍👍
such a thorough explanation! one of your best teaching videos Jay! Thanks!
Awesome project and great way to show how much you can get out of one board.
Just wanted to say thanks for the videos. Great content and great editing. Really impressed with how great youve got the audio dialed in - you cant tell the difference between your voice overs and when youre actually talking.
hahaha. I recorded the voice overs in front of the camera as I went and just used that audio for the other parts. I did it that way because at that moment I knew exactly what I wanted to say and also because the audio would match :)
Very well explained and shown. I have been using a scrap piece of wood as a follower for years, I love your idea with the lip to make it easier to grip.
You make woodworking seem so easy, even for beginners like me. Many thanks.
Such a satisfying process with beautiful results.
Yea I made router lift from Jays plans (the XL version) and it really is easy to match the height of the bit to exactly what you need. Just rotate your hand like he said. Took me roughly 11 hours or about 3 days on and off to build. Works like a charm. Looking to create my own cabinet doors as I just got similar bits myself. Thanks Jay!
Glad to hear that, Adam!
This was such a great video! It cleared up a whole lot in my head, and your style of editing is just awesome. Thank you for making videos, you are top notch.
PS: throwing out my router lift and starting one similar to yours.
Very nicely done and a great explanation. That’s a nice setup if you don’t have stock feeder on a large shaper. We ran so many raised panel doors with a guy I worked for several years back that he dished out the money and bought a stock feeder for his powermatic shaper. It makes it a lots easier and faster, but you just don’t get that feeling of accomplishment with a large shaper and stock feeder. But when you’re making an entire set of cabinets every 1 to 2 weeks for 3 years, it made things a lot easier and mind settling for us.
One of your best videos Jay. Thanks for your attention to detail!
- Excellent demo. Very clear, concise info. The wood was very attractive as well.
Jay,
Great video thanks for taking your time to make and share.
Jim
Excelente diseño, limpio y eficaz! Gracías por mostrar tus ideas y tu trabajo!
Excellent explanation of how to set up that door. Thanks
Great simple video explaining a raise panel I'm now confident in tackling my doors
I've been wary of trying this, thanks for making it simple, champion video.
Very nice work, very satisfying seeing the end product.
Thanks Jay, now I want to make all my doors with raised panels.
Love how organized and functional your shop is
Thanks. It's always changing for the better.
I love the way you maneuver the router, just amazing. Just amazing, you got a new subscriber.
Much better than the cabinet making class I took at Woodcraft. This is a perfect video for raised panel door on a router table!! Router table and fence is on the list for sure.
Thank you for this video. It made me understand more about these router bits. Keep up the good work
Another Great Video JB! I picked up several awesome tips I’ll be using in the future for my own shop! Have A Super Week!.....Gus
Keep those scrap pieces you used for setup, they come in handy later. Most hardwoods that you’ll use will be the same thickness. Then you can put the scrap into the bit profile and eliminate time in setup 😉
I was thinking with that push box he made could make a cut of each bit on a side and have all 3 settings on one piece.
Awesome perfect cut.👍
Wish to have one...
Thank you so much for sharing sir...
Very well presented Jay.
Great video. Excellent router setup. Nice and quick work. Thank you for sharing.
Great job! You’re truly an artist
Nice work, thanks, Jay. Love the Dragonfly apron!
Thanks for making this video. I was looking for a video that featured these exact bits.
I am making a free standing pantry and have been looking at my current cupboard doors wondering which router bits I would need. Awesome video...again....
Very impressed with the lack of sawdust during your operations here. Great job
Good video, thanks for showing the process. 👍
Nice one, got some useful tips from this one! My bits finally arrived and I'm starting routing my kitchen panels tomorrow.
It's my first woodworking project so wish me luck!
How easy is that, another great video. Thanks Jay.
I have a set so thanks for showing me how to use it. Have not had a chance to use it yet but at least now I have an idea on how to use it. Thanks
Looks great! I’d like to see that panel with some finish on it. I bet it is amazing.
Thank you Jay. Your an awesome teacher and woodworker.
Thanks Neil.
Great video you demonstrate the cutting better than any video i have watched before👏👏👏👏👏
Thank you very much for your detailed information. It was very helpful 😊
This is the best raised panel door video I’ve seen. Thanks! I’m going to go watch the build video of that mitre table.
Great video jay. I have had a freud door making bit set I got for free when I bought my router table but what always terrified to try using it I may give it a shot now. Thanks for all the info
Great Job Jay! Made the coping sled and it works perfect. "No need to use gold when stainless steel will do"
Excellent tutorial, and an amazing setup.
Door came out nice. I am encourage to try this for our laundry room.
Jim
amazing job buddy, thank you for teaching us
I really enjoyed watching this video. It will help me a way forward. Thanks 🙏