Just got the ms-211 c-be yesterday(no manual with it floor demo) ... this video does it all. Very clear and well made set of instructions... Stihl should hire you ;)
PS The choke settings are quite clear .. but when you push the lever down to full .. it just comes back up ? Everything else on the video is excellent thanks.
Adjusting wheel and screw that holds wheel on bar fell into high weeds when I took cover off. Had no idea I should check that screw for tightness. Must have been made on Monday. Love the easy start though.
Thanks for the video. Was wanting to pick up the ms211 but was concerned over the wheel on the bar and its durability. Do you find you have to adjust tension more often then the normal side tensioner? Again thanks for sharing
Hollowalone1 Not at all I have used the saw a lot more since this video and haven't needed to adjust the tensioner anymore often than the normal side tensioner. Glad you enjoyed the video. Thanks for watching!
Great saw my friend! In my opinon a great tool to have:) Very nice features normaly i do not like plastic but i know that Stihl would not use it if they did not trust it.. Great demo btw! All the best buddy:)
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then
Thanks for your comment. I agree the plastic cover is a turn off. I did however drop the saw from a height of about 15 to 20 feet and it held up fine. I do love the older stihls and older huskys. They dont make em like they used to.
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then.
Just got this saw second hand. Your video speed started my acquaintance with everything. Thanks!
I've had mine for 2 years. Excellent little saw
This is a great saw. I have owned mine for several years. Very easy to start. Easy to use. Very dependable.
Just got the ms-211 c-be yesterday(no manual with it floor demo) ... this video does it all. Very clear and well made set of instructions... Stihl should hire you ;)
Thanks for the video. The book didn't have much instruction on tightening the chain but your video answered all my questions. Love my Stihl 211-C
PS The choke settings are quite clear .. but when you push the lever down to full .. it just comes back up ? Everything else on the video is excellent thanks.
You don't show the one thing I need to know .. the choke settings ?
You should always hold up the bar end/nose when adjusting chain tension.
Finally tighten down bar, with the bar end in it's upper most position.
Adjusting wheel and screw that holds wheel on bar fell into high weeds when I took cover off. Had no idea I should check that screw for tightness. Must have been made on Monday. Love the easy start though.
I cant wait to get my Stihl!
Good demo, help me a lot. Thanks so much
keep the bar up when you tighten the chain and the "nut"
Great video thank you. Lots of useful info.
Great review! Bought one second hand because of it. Thnx
+T Tom Glad you found it helpful. Thank you for the comment and for watching! Take Care!
Thanks for the video.
Was wanting to pick up the ms211 but was concerned over the wheel on the bar and its durability.
Do you find you have to adjust tension more often then the normal side tensioner?
Again thanks for sharing
Hollowalone1 Not at all I have used the saw a lot more since this video and haven't needed to adjust the tensioner anymore often than the normal side tensioner. Glad you enjoyed the video. Thanks for watching!
Thanks bro from France for your video ;-)
Great overview definitely learned a bit from this vid
Thanks Matthew! I left out a few things though. What chainsaw are you looking into getting?
im thinking this www.stihlusa.com/products/chain-saws/farm-and-ranch-saws/ms311/ with a 20 inch bar
AlaskanFrontier1 very nice!
i kinda want one that can cut through concrete that i can edc
Great saw my friend! In my opinon a great tool to have:)
Very nice features normaly i do not like plastic but i know that Stihl would not use it if they did not trust it..
Great demo btw!
All the best buddy:)
Hey Rob! Its good to hear from you! Hope all is well? Thanks for watching my friend!
Yes i am fine thank you for asking. Although work keeps me busy seven days a week but i hope to get back here and catch up soon.
Did the spikes come with it or did Stephan give it to you?
Are you starting woodland or something?
Is there a difference between the MS211 and the 211c?
Sorry I am not sure.
Easy chain tensioner vs the old school two tightening nuts on the chain bar side.
ZombieFighterOf2001 yes there is. the 211c has easy start and a primmer bulb and quick tensioner
You forgot to record the COLD start. Right. How about a two minute video that shows a cold start?
STIHL MS 211C Chainsaw Brief Overview and Start Up
FarWest Colorado
By far the weakest saw I've dealt with. Fine for trimming smaller branches
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then
Thanks for your comment. I agree the plastic cover is a turn off. I did however drop the saw from a height of about 15 to 20 feet and it held up fine. I do love the older stihls and older huskys. They dont make em like they used to.
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then.