Your teaching skills is great Brother. Allah may bless you.
6 ปีที่แล้ว
Very useful tutorial. One reminder; when you delete that EQ dimension it actually warns to keep the EQ constrain or keep it. So if you say "keep it". So if you dont want to see it, you can just delete it but keep the constrait (so you do not need to "hide" it, it will remain there as a constraint). In order to review the deleted but remaining constraint afterwards, you can click on "reveal constraints" button on lower right.
Can I still move one of the dimensions around like upward or downward of the dimension next to it? Because after making the dimensions of the whole wall, they are all stick into 1 unit.
I am currently taking a summer revit course and your videos are live saving. I dont want to email my profesor everytime I have a question so your videos answers a lot of my questions. Thank you!
can you set the different tick marks on each side of a dimension? for example I want one end to be a diagonal tick mark and the other an open dot tick mark
I’m going to be doing as-builds and some design builds. I used to AutoCad, now I’m going to be using Revit 2019. Do I have to have Revit MEP to do the MEP work like you show in your great videos?
Just one thing I don't like about dimensions in Revit is the spot elevation command because of not allowing us to align spots. I really need to align spots when I make facade dimensions. Thank you for the tutorial and if you know how to solve this problem let us know.
Nice tutorial, again Milos. But there is missing one thing - how to make effectively dimension aligned with that sloped wall. You mentioned linear dimension, but only in main directions.
How can i rewrite the dimension withou changing a model ? When i get some crazy numbers like 734 or 1611 in window family opening and i want them to be 730 or 1600 without cahning anything in 3D....
Thanks for the videos man I have a question how do you save the sitings and families in Revit, so you don't have to copy past the families and make the sitting every time opening a new project.
I love your videos. I was wondering if you think you could model a log home. It's been extremely hard to deal with on my end and the tutorials out there already aren't very good.
Hi Sir Balkan I have a question that regards to the line weight of the dimension. In this case line weight is 0.1mm on Edit Type Properties. But it looks like 5mm and so obvious when using through line. How can we make it a real 0.1mm? Please advice thank you! By the way I'm one of your subscriber and fanatics I learned a lot on your tutorials. Keep it up. Thank you!
You didn't dimension the length of that angled wall section. Safe to assume that's just not a feature in Revit? I know AutoCAD has a sort of pull-off dimensioning feature, where you can just select a line and it will dimension its length end-to-end. I am flabbergasted that I can't do that in Revit. My workaround is to draw a detail line formatted to try and conceal it in the framing member and dimension that end to end. Dimensioning endpoint to endpoint of the framing member yields extremely unintuitive results - never the one I need.
you did not give dimensions to the "INCLINED WALL" in "INCLINED DIMENSION" for which it was made and that is the reason why i watched your video because i don't know how to dimension the inclined wall
It exist a offset for the dimension? Example , I dimension the wall windows but I want that the end point dimension will be 4’ . You can do that in Auto Cad. So Revit is putting dimension by eye ?Woooowwww this programs is for architecture and engineering , this = to (Precision). not putting things by eye . Revit it a joke but a bad one
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
I can’t wait to be a master at revit. Thank you so much.
Can't thank you enough for these revit tutorials, they are all awsome.
Excelent, I learned something new. Your videos are way ahead of its time. In the future a lot more people will watch it.
Bruh!! At 3:00 my question was answered without all of the filler talk lol THANK YOU!
Ur voice is so amazing.. And teachings are incredible
Your teaching skills is great Brother. Allah may bless you.
Very useful tutorial. One reminder; when you delete that EQ dimension it actually warns to keep the EQ constrain or keep it. So if you say "keep it". So if you dont want to see it, you can just delete it but keep the constrait (so you do not need to "hide" it, it will remain there as a constraint). In order to review the deleted but remaining constraint afterwards, you can click on "reveal constraints" button on lower right.
thank you
Feeling thankfull !!! Thank you soooooo very much.
THANK SO MUCH! I AM LEARNING A LOT WITH YOUR VIDEOS
As usual excellent tutorial , thank you
Balkan is the best by faaar
Very clear and well explained, thank you so much
Amazing as usual
great video, it helped me a lot!!!
Thx.for all your helping videos bro....
Informative. Thank you
Watching from Philippines.
sir eq denotes not showing the dimension line. how to to fix the solution
Love to learn each n every point
Hats up to you brother keep it up
My question is, can values be edited after placing them?
Maaan your videos are really helpful
is there a way to get this to work for pipework?
Can u tell about how to control the distance from element to dimension.
>Nice thank you this helps.
Sir please make a video on how present architectural drawing to client including grid lines
How can change the dimensions b/n window and corner
right click property bar not showing. how to fix the solution
Can I still move one of the dimensions around like upward or downward of the dimension next to it? Because after making the dimensions of the whole wall, they are all stick into 1 unit.
Please make a series of full rivet mep tutorials
Is possible to export Revit to .dwg with different dimension layers? For e.g. one layer for outside dimensions, second layer for inside dimensions.
how to remove text and dimensions layers like autocad hide them
why you are not using linear annotation instead of aligned one?
how to measure angular dimensions larger than 180?
PERFECT, THANK YOU
I am currently taking a summer revit course and your videos are live saving. I dont want to email my profesor everytime I have a question so your videos answers a lot of my questions. Thank you!
Your videos are superbbbb....
excellent tutorial!
Hi how r u
I have little problem in revit dimensions i need to know can i change extention line type of dim in revit to dots?
THANK YOU BALKAN
Im using Revit 2015 and I cant see that pick option :( Should I individually make it thou?
Thank u
can you set the different tick marks on each side of a dimension? for example I want one end to be a diagonal tick mark and the other an open dot tick mark
Great tutorial, I just subscribed! :)
Hi Balkan, can you please show how to have boxed dimensions? Thanks
How do you make your dimensions shorter...?
I’m going to be doing as-builds and some design builds. I used to AutoCad, now I’m going to be using Revit 2019. Do I have to have Revit MEP to do the MEP work like you show in your great videos?
how do you do continuous dimensioning like picking up points along. witness line in 2019 seems not working.
Just one thing I don't like about dimensions in Revit is the spot elevation command because of not allowing us to align spots. I really need to align spots when I make facade dimensions. Thank you for the tutorial and if you know how to solve this problem let us know.
Nice tutorial, again Milos. But there is missing one thing - how to make effectively dimension aligned with that sloped wall. You mentioned linear dimension, but only in main directions.
PLS CAN U DO HOW TO MAKE A PROFESSIONAL TEMPLATE SUCH AS 30 BY 40 DESIGN WORKSHOP DID IT WOULD BE AN IMMENSE AND HELPFUL THANKS IN ADVANCE
Thank you!!!
thanks a lot bro
Thank you for very nice tutorials but for "have' please try to say hev instead of hiev.
Thankyou Balkan.. very Helpful. please Upload a video tutorial regarding the siteplan / key plan in Drafting mode.
How can i rewrite the dimension withou changing a model ? When i get some crazy numbers like 734 or 1611 in window family opening and i want them to be 730 or 1600 without cahning anything in 3D....
How do reduce the size of annotations, for example section and elevation symbol
Thanks sirr 😍😍😍
Great 👍
Thanks for the videos man
I have a question how do you save the sitings and families in Revit, so you don't have to copy past the families and make the sitting every time opening a new project.
How to Solve Over Constrained Reference Plane?
Exelent master yeahh the best tutorial.
Hi...
Plz tell me how to create dimensions in ceiling plan, in section, and in electrical plan....???
please can you help me to draw metal folding gate and gable eaves please...
So helpfuuuul...
hi! thanks for the videos! i have aproblem with putting dimentions, it's showing 0m in any case. Do you know what could be the problem? thanks again!
Hi, great video.
Can you make one video in the Revision management in Revit?
I love your videos. I was wondering if you think you could model a log home. It's been extremely hard to deal with on my end and the tutorials out there already aren't very good.
Nice one
Excelent!!!!!!!
how to make the dot bigger? my eyes nearly spoiled.QAQ
Hi Sir Balkan I have a question that regards to the line weight of the dimension. In this case line weight is 0.1mm on Edit Type Properties. But it looks like 5mm and so obvious when using through line. How can we make it a real 0.1mm? Please advice thank you! By the way I'm one of your subscriber and fanatics I learned a lot on your tutorials. Keep it up. Thank you!
You didn't dimension the length of that angled wall section. Safe to assume that's just not a feature in Revit?
I know AutoCAD has a sort of pull-off dimensioning feature, where you can just select a line and it will dimension its length end-to-end. I am flabbergasted that I can't do that in Revit.
My workaround is to draw a detail line formatted to try and conceal it in the framing member and dimension that end to end. Dimensioning endpoint to endpoint of the framing member yields extremely unintuitive results - never the one I need.
just a quick spot on those sizes doesn't add up 723
Very helpful video.
Can u please show how to make families for doors and windows with different profiles on the panels and architraves.
where are you based?
How can I delete a duplicated dimesion style?
just right click on it and you should have a delete option :)
U didn tmention function of tab while selecting the end points of lines.0
Thank
you did not give dimensions to the "INCLINED WALL" in "INCLINED DIMENSION" for which it was made and that is the reason why i watched your video because i don't know how to dimension the inclined wall
Nice...
👌🏾
Brother I want to know, how to make working drawings in Revit as in autocad.. and want to know how to give room dimensions like (10x10) .. plz
Mashaallah
salman yusuf @ where are you from
No pun intended. 😂
It exist a offset for the dimension? Example , I dimension the wall windows but I want that the end point dimension will be 4’ . You can do that in Auto Cad. So Revit is putting dimension by eye ?Woooowwww this programs is for architecture and engineering , this = to (Precision). not putting things by eye . Revit it a joke but a bad one
in rivet
dont make empty
🥺🥺🥺🥺
You missed one. Corner to Corner on a diagonal. Freaking impossible.
Poor teaching he doesn't know how can give slanted wall dimension
boş yapma
Exelent master yeahh the best tutorial.