Remember the " paratrooper repeater " .. me paper round wasnt sufficient too fund one back in ( around ) 1973 .. would like VERY MUCH too see one now ,I could only look the the shop widow with my snotty nose pressed up against the glass ... happy days though ...
Fantastic gun mine was for twelve weeks, power droped to 8ft ld, changed the breech seal piston seal now it does 9 foot ld, never seen such a crap job on the internals packed with grease, cocking shoe scored a 2 mm grove on the gas ram, piston chamber rough as a bears arse, gamo used to make decent air guns, looks like. They dont care anymore pity could of been a. Good gun
Not that I remember...Mid height rings were supplied. You may get a blurry patch if you were to use short rings but it's not going to be a big problem as it'll be well out the way. Happy shooting.
I just don’t see the need for break barrels with all the air gun tec out there I’d just get a multi shot pcp I’m sure this guns good but would get a multi shot.
Hi Mark - No it was actually very well made and we ran a few brands through it. Some pellets may state they are 4.52mm on the tin such as JSB Exacts, but when measured you may find them to be 4.50mm. Then again...may just be the mag is oversized a bit.
@@ShootingOutdoorsChannel Thank you for your reply. I have been using Air arms Diabolo field 4.51 and I have had a few fall out of both magazines. I will try some different pellets.
A guy at my shooting club bought one , took it back to the shop where he got it from because it wouldn't group under 6" at 25 yards , and yes he used a variety of pellets and all produced the same crap group's, nice looking rifle but it doesn't work!
I have one ☝🏻 and it’s superb
Remember the " paratrooper repeater " .. me paper round wasnt sufficient too fund one back in ( around ) 1973 .. would like VERY MUCH too see one now ,I could only look the the shop widow with my snotty nose pressed up against the glass ... happy days though ...
Fantastic gun mine was for twelve weeks, power droped to 8ft ld, changed the breech seal piston seal now it does 9 foot ld, never seen such a crap job on the internals packed with grease, cocking shoe scored a 2 mm grove on the gas ram, piston chamber rough as a bears arse, gamo used to make decent air guns, looks like. They dont care anymore pity could of been a. Good gun
I have one coming today. One thing concerns me, doesn't the magazine unit get in the way of the scope?
Not that I remember...Mid height rings were supplied. You may get a blurry patch if you were to use short rings but it's not going to be a big problem as it'll be well out the way. Happy shooting.
@@ShootingOutdoorsChannel thanks. Looking forward to it . Great channel, subscribed.
The answer to that one is NO!
I just don’t see the need for break barrels with all the air gun tec out there I’d just get a multi shot pcp I’m sure this guns good but would get a multi shot.
Cheers dudes 🤘
Hi. Did you have any problems of the pellets not loading in the barrel and just falling out to the floor?
Hi Mark - No it was actually very well made and we ran a few brands through it. Some pellets may state they are 4.52mm on the tin such as JSB Exacts, but when measured you may find them to be 4.50mm. Then again...may just be the mag is oversized a bit.
@@ShootingOutdoorsChannel
Thank you for your reply. I have been using Air arms Diabolo field 4.51 and I have had a few fall out of both magazines. I will try some different pellets.
A guy at my shooting club bought one , took it back to the shop where he got it from because it wouldn't group under 6" at 25 yards , and yes he used a variety of pellets and all produced the same crap group's, nice looking rifle but it doesn't work!