I wish you could do ALL "how to" videos! JUST THE FACTS and so 1-2-3! So many people go on for extended periods of time when all that is wanted and needed is QUICK concise info. GREAT JOB!
Not sure what the guy was babbling on about being paid for reviews. But I just bought this and I love it. Good overview of maintenence. Clear and concise. My chain popped off and mainly just wanted to confirm how to put it back on. Thanks!
Great Video! Exactly what I needed - How to changes the chain on the saw. Straight forward and to the point. I especially liked that you gave the 13 mm size you would need for the bolt and the part number for the chain. Good Work! Thank YOU!
Also, you should use a small flat blade screwdriver to clean out the groove that the chain rides in and flip the (guide) bar over each time you install it so it wears evenly.
Wish I saw this before I saw all the new Milwaukee telescoping pole. Wonder if that comes w an attachment or need to buy the whole new tool😂 thanks for covering this good quick vid
Great video! When you're putting tension on the chain ⛓️ if it's a new chain it's should be tight enough to just pull out to the edge of the teeth. If it's a used broken in chain it should be tight but when pulled out you should just be able to fit a nickel between the chain and the bar. 👍
You should also remove the “e” clip from the sprocket and clean any extra debris that has worked in deep. You can also save you some $$$ by just buying Oregons R40 model replacement chain. The Milwaukee chain is made by Oregon and Milwaukee just uses their packaging. Oregons R40 is currently $14.85 so depending on where you buy the Milwaukee branded chain you can save $7-$10. Thanks for the video
did you happen to have problem with the chain oiler ? I got a brand new one and it looks like no oil are going out. Pass through 1x 8 ah so far and the oil reservoir didn't lower. I open the cover and check out the small hole and nothing seems stuck, I push air through it and I see air going in reservoir. Tried the other side but was a bit hard to do without a mess but nothing goes towards the chain. What should I look at ?
Do you use the extension? If so, how does this feel with it and would you be able to get a second extension on there safely? Looking for videos on people using extensions.
bought a harbor freight cheap electric chain saw last spring, used it to cut about 5' off the top of some bushes. i didn't care if i broke it cause i could exchange it when i finished. all though the chain fell off several times and crap/sticks and vines would get crammed places they should not go. every time i tore it apart and put it back together it still worked.... :)
I wish you could do ALL "how to" videos! JUST THE FACTS and so 1-2-3! So many people go on for extended periods of time when all that is wanted and needed is QUICK concise info. GREAT JOB!
Thank you! I didn’t have to wait for my husband to get the chain back on
Not sure what the guy was babbling on about being paid for reviews. But I just bought this and I love it. Good overview of maintenence. Clear and concise. My chain popped off and mainly just wanted to confirm how to put it back on. Thanks!
This video was perfect, no side distractions, etc. To the point. Keep em coming!
Maintenance videos are very rare, but after you replace that chain a few times because of failure to do the maintenance on it, YOU LEARN MAINTENANCE!!
This kind of video is the reason TH-cam makes me brave. Perfect. Straightforward. Thank you!
Years later this is still helpful thank you
Great Video! Exactly what I needed - How to changes the chain on the saw. Straight forward and to the point. I especially liked that you gave the 13 mm size you would need for the bolt and the part number for the chain. Good Work! Thank YOU!
This was the perfect video to adjust the chain. I appreciate you!
Also, you should use a small flat blade screwdriver to clean out the groove that the chain rides in and flip the (guide) bar over each time you install it so it wears evenly.
Nice I didn’t think about that
This instructional video was just what I was looking for. Thank you.
Thank you. This was brief, to the point--and so very helpful.
Thanks for the video. The oil made a bit more of a mess than I expected and did not know how to clean it up. Thanks again.
What weight oil do you use?
Thanks! I just had the blade fall off. This helped me!
Awesome quick get to the point video.. no BS
Nice work 👊😎
Great sharing sir watching from Canada 🇨🇦 I have my toys like that awesome I'm happy thanks to my daughter she bought for me on my birthday 😊
Thanks for posting this! Helped me out today 👍
Thanks for posting, I just bought this attachment.
Very thorough and to the point…….thanks for sharing 👍
Thank you for this informative video. I have this pole chainsaw and was wondering how to clean it
Ty, your video answered all my questions perfectly
Wish I saw this before I saw all the new Milwaukee telescoping pole. Wonder if that comes w an attachment or need to buy the whole new tool😂 thanks for covering this good quick vid
Great video! When you're putting tension on the chain ⛓️ if it's a new chain it's should be tight enough to just pull out to the edge of the teeth. If it's a used broken in chain it should be tight but when pulled out you should just be able to fit a nickel between the chain and the bar. 👍
dude thanks so much for this detailed vid you're the man!
Lmao i was waiting for the punch line and then im like oh he serious right now...
Nice video!
Thanks for the video you just saved me a lot of time!
I snapped the pole.. is it easy to replace the pole?
Thanks for the video and tutorial 🇺🇸👍🏻 How do you like the Milwaukee pole saw ?
I love it
Mike Holloway I have an Oregon electric pole saw and can verify that once you use one you’ll never want to not have it.
Great, thankyou. To the point and concise. Cheers.
You should also remove the “e” clip from the sprocket and clean any extra debris that has worked in deep. You can also save you some $$$ by just buying Oregons R40 model replacement chain. The Milwaukee chain is made by Oregon and Milwaukee just uses their packaging. Oregons R40 is currently $14.85 so depending on where you buy the Milwaukee branded chain you can save $7-$10. Thanks for the video
Thanks for posting my man, my chain just got misaligned
Hey man. Great video. This was extremely helpful.
I just bought mine, what kind of oil you used?thanks
thank you, what kind of oil should I use for the saw?
Very nice fast video.Right to the point!what weight oil do u use
😝😝mopar from the service department, got a box of those in my garage 😂😂😂😂😂. Thanks for the video.
I know nothing about chainsaws. Do you know the specific fluid that goes in the reservoir
What oil I have to use for best results whit this attached
On the actual gray housing are you missing any bolts/screws? My head wiggles
Hi, what size chain file is used for sharpening? Thanks
I havent looked into that yet so im not sure
Thanks for that! Can’t wait to use mine this summer.
Question: What oil do you use?
Thanks in advance.
How to store it so it doesn't leak bar oil, a known issue?
Thanks! Good video and easy to follow.
Beautiful Tutorial-thank you.
did you happen to have problem with the chain oiler ? I got a brand new one and it looks like no oil are going out. Pass through 1x 8 ah so far and the oil reservoir didn't lower. I open the cover and check out the small hole and nothing seems stuck, I push air through it and I see air going in reservoir. Tried the other side but was a bit hard to do without a mess but nothing goes towards the chain. What should I look at ?
Same issue with mine out of the box. Did you ever get it working?
@@dw5432 I've been through 2 packs or so during the summer but it looks like it's not using oil so much or even not at all and I don't know why.
How is the chain and bar holding up as far as wear?
@@dw5432 mostly hot as fuck while cutting and afterwards. Chain and guard looks OK for now
Mine is brand new and leak oil, is it normal?
Thank goodness for this video!
Do you use the extension? If so, how does this feel with it and would you be able to get a second extension on there safely? Looking for videos on people using extensions.
Thank you for training us!
Short and sweet thank you so much I can probably do that to the Milwaukee chainsaw same thing thank you very much and cheers with a beer
Thanks for your help!!
Just used mine for the first time, do I need to empty the remaining chain oil after every use?
You don't have to, but make sure to store it horizontally or it will leak out.
Outstanding!
Does it matter what brand of oil do you use in the reservoir? Will any brand work?
BAR OIL. Nothing Other than that. Any quality brand should be fine.
Super helpful dude thanks for the vid
Yeah, that earned a follow. Nice job
Great video bro keep it up 👍
bought a harbor freight cheap electric chain saw last spring, used it to cut about 5' off the top of some bushes. i didn't care if i broke it cause i could exchange it when i finished. all though the chain fell off several times and crap/sticks and vines would get crammed places they should not go. every time i tore it apart and put it back together it still worked.... :)
Big ups man, thanks for this vid
Thank you for this!
When i clean my cain cover i use dawn dish soap then i rinse the cover it's self off with water
Perfect video. Well done and thanks.
so helpful - thanks, dude!
Awesome thanks
Thanks man!!! This is helpful!!!
mad support, love what you do
Helpful !!!!!! 💥💥💥
Thanks for the video!
Thanks!
Thank you for this video
You should also include information about Chain sharpening (chains are pretty expensive) to make the video more complete. Thanks for the video
Thanks brother
THANK YOU!!!
Great video, please don't use brake parts cleaner on plastic and rubber. Over time it can cause the material to become brittle and break.
Awesome. Thank you so much
Thanks
Great video, cheers
You legend thank you 👌🏼
Good video and I agree…to well with the environmental concerns 🤪
Thanks bro!
Perfect...thanks much.
Lifesaver!!!
And for the oil ?
Heres the demo video that I go over the oil I use at 1:36
th-cam.com/video/ROvnJb4575A/w-d-xo.html
BARRICADE GARAGE thanks bro
I'm using cooking oil with some success.
👍👍👍👍
Maybe this one went over my head, but your other videos are funnier
gettin in dare nice a deep like
You have a nice voice
😻
cool intro bro
Damn where tf is my adjustment tool.
So I am doing it right. That nut is tight when it's brand new lol
Hjh🎉
Thank you!!!!