Thank you very much for your time and kindness in sharing your knowledge. It was very productive, video is super helpful.. I only have a question about the lower fixation. I recommend making the markings without it being 100% pressed (6:13) for better functionality when removing the screen from the wall. Have a great day, Zara
Thank you for creating this. I have been thinking about getting an UST and screen, but had my doubts on how to align screen and image. Your video was exactly what I needed to understand the process upfront 🙂
Hi thanks for the video . Any issues with hotspotting in the center of the screen ? I bought the classic ALR pet crystal and have a very noticeable hot spot in the center of the screen . Looks like the lens reflection a slight orange/yellow color
@EVERYTHINGcpo do you still use the ls800/NP black series combo? Are you happy? Anything that you dont like? Wondering whether to go the same way myself at the moment
I like this screen in all conditions so far. My dark room doesn't have a screen actually. I'm projecting on the wall. I get about 140” and a screen that size is pricy. But it looks fine to me on the wall in the dark.
great video and thank you for this! I just bought an Epson LS650 and Nothing Projector 120" screen. Today is the day I'm installing the screen and your video is super helpful. thx again
so I got everything installed. I did notice some "finger print" marks or some kind of little smudges on the back and front of my screen when I unrolled it. They aren't noticeable while when the projector is on, but definitely noticeable when the projector is off. Not sure if you experienced the same thing. Also, add me to the list of folks that had a really hard time to get the edges put on. The first problem was getting the holes to align properly, then the 2nd problem was a small gap on the top edges between the two pieces. I really had to play around with this and leave a screw loose here and tighten a screw there to get it all to somewhat align. I never could get it perfect and if I really look, I can notice the top middle and the pieces are not perfectly aligned. The OCD in me hates it...but I do forget about it when I watch with the projector on. oh well. The screen looks really good however both during the day and night. I'd have to give this screen about a 8/10.
I didn’t. I just screwed straight into the studs without drilling a pilot hole. If you use the drywall anchor just pick a bit that is slightly smaller than the anchor and then lightly hammer the anchor into the hole. Snug is good.
The installation is just as important as the review of the screen so thank you very much for including the process!
Thank you!
Thank you very much for your time and kindness in sharing your knowledge. It was very productive, video is super helpful.. I only have a question about the lower fixation. I recommend making the markings without it being 100% pressed (6:13) for better functionality when removing the screen from the wall. Have a great day, Zara
11:52 is a damage on right top corner? how easy to make a damage in the fabric is?
A Roberta in did
Really helpful tips - many thanks! Just bought off their website as currently on offer for £512 shipped from EU to UK : )
Thank you for creating this. I have been thinking about getting an UST and screen, but had my doubts on how to align screen and image. Your video was exactly what I needed to understand the process upfront 🙂
Hi thanks for the video . Any issues with hotspotting in the center of the screen ? I bought the classic ALR pet crystal and have a very noticeable hot spot in the center of the screen . Looks like the lens reflection a slight orange/yellow color
Your meticulous installation guide is truly appreciated!!
Thank you for the thorough and insightful steps!
Its was my pleasure!
Excellent video. Is there room to mount LED strips for behind screen ambient lighting?
@EVERYTHINGcpo do you still use the ls800/NP black series combo? Are you happy? Anything that you dont like? Wondering whether to go the same way myself at the moment
Yes, and I am very happy with the results. And 100% happy with my decision to go this route.
Thanks for the install guide! Did you end up with a little play between the wall and the screen?
Great video, perfect timing was looking at ordering this screen in 120. Did you notice any picture difference at night vs bare wall?
Big difference! No question the screen is better than a bare wall.
What screen do you use in your dark room? Would you recommend this screen for zero ambient light viewing?
I like this screen in all conditions so far. My dark room doesn't have a screen actually. I'm projecting on the wall. I get about 140” and a screen that size is pricy. But it looks fine to me on the wall in the dark.
great video and thank you for this! I just bought an Epson LS650 and Nothing Projector 120" screen. Today is the day I'm installing the screen and your video is super helpful. thx again
so I got everything installed. I did notice some "finger print" marks or some kind of little smudges on the back and front of my screen when I unrolled it. They aren't noticeable while when the projector is on, but definitely noticeable when the projector is off. Not sure if you experienced the same thing. Also, add me to the list of folks that had a really hard time to get the edges put on. The first problem was getting the holes to align properly, then the 2nd problem was a small gap on the top edges between the two pieces. I really had to play around with this and leave a screw loose here and tighten a screw there to get it all to somewhat align. I never could get it perfect and if I really look, I can notice the top middle and the pieces are not perfectly aligned. The OCD in me hates it...but I do forget about it when I watch with the projector on. oh well. The screen looks really good however both during the day and night. I'd have to give this screen about a 8/10.
How do you like LS650? I'm waiting on my LS800 shipping but wondering if I should've just got LS650
nice vid!
Thanks!
What size drill bit do you use?
I didn’t. I just screwed straight into the studs without drilling a pilot hole. If you use the drywall anchor just pick a bit that is slightly smaller than the anchor and then lightly hammer the anchor into the hole. Snug is good.
I'm from Brazil..nothing projectors take money but dont delivery The projectors..os great problema tô Brazilian costumers os a shame
I received my nothing screen a couple of days ago
How much you paid?
I paid $650 shipped. That was $50 off for the sale.
@@EVERYTHINGcpo thank you