Thanks! And yes we know y’all need some more videos, we are working on doing better with getting more content. We’ve been pretty busy with customer stuff and that has taken us away from time to video, I’ve got a few more coming soon though!
I’ve used good old mystery oil a few times and it also works awesome! In the video when I try to fire it up I’ll throw some in the oil to help free stuff up!
I have the same problem as this, I filled the cylinders with WD40 first, and after couple of days I filled them with tf. It has been like that for 4 days now, tomorrow I'm gonna try rotating the crankshaft. My engine was left about 6 years under the rain without spark plugs.. that is really tough. Thank you for sharing.
Diesel and a bit of oil mixture in all the cylinders and leave it sit. That will break up a lot of the rust. Keep in mind diesel will eat away rubber - which you will be replacing anyway - but keep that in mind. WD40 will not do jack shit. No idea why people keep using WD-40 for things its not intended for.
there is a product called FREE ALL, i used it on my 2.2 mopar turbo motor is sat all winter last year and got flash rust on the cylinders,i'd pulled the pan a few years ago and it was a brand new short block installed in my car by a dealership years ago,this stuff i shot it down the cylinders and it freed up this new engine, used the whole can,i was desperate,is worked the engine runs ,no smoke just like it did,try it,i swear by it,its in a blue and silver can,i bought a whole case,now when i let engines sit, fill the cylinders thru spark plug holes,and make them wet before storage,shoot is down the intake real good prior to storage no surprises anymore,give it go,the stuff is 6.00 dollars a can worth it
Very good video, one suggestion if I may, keep the camera close to you, the mic is on it. When you move too far from the camera, your audio drops right off
First of all, yes, its most important to free the slugs AND protect the cylinder walls from scoring. So flooding the cylinders with a good thin lube product is the first step. But it is ALSO highly recommended to pull the valve covers and lube the valve guides and lube the rockers and lifters/ camshaft lobes. It a lot of cases though guys are planning to buy a hi pro cam and kit from the aftermarket, so....
Yes. Pour it in through the spark plug holes. Also a good idea to pour some into the intake manifold and to remove the valve covers and check for stuck valves.
Hey guys. Just wanted to say I’m enjoying your channel and am glad to see it growing. I’ve started mine as well. I hope to do half as well as you guys. Keep it up!!
l used some used ATF + Acetone. Let it sit for a day before I started applying torque (back -n-forth). - Didnt budge much... But. I kept it up over the next 3 days & it gradually started turning. After a while, the Crank turns w/out difficulty I just hope it's not too gouged on the cylindo walls. Will see.
How to unstick a stuck engine, over 6 months ago, started to get my sbc..
unstuck, I have learned a lot from your two man team! Thanks again Norm 😎
love the cats photobombing in the background LOL
The kittens were having fun while you were working.
Need more videos. You guys got a great show really descriptive and that's what I like about this channel. But we need more videos.
Thanks! And yes we know y’all need some more videos, we are working on doing better with getting more content. We’ve been pretty busy with customer stuff and that has taken us away from time to video, I’ve got a few more coming soon though!
Great video , I myself also add mystery oil down the intake so the intake valves get it also etc... 👍
I’ve used good old mystery oil a few times and it also works awesome! In the video when I try to fire it up I’ll throw some in the oil to help free stuff up!
@@resurrectionauto5714 nice scion
I have the same problem as this, I filled the cylinders with WD40 first, and after couple of days I filled them with tf. It has been like that for 4 days now, tomorrow I'm gonna try rotating the crankshaft. My engine was left about 6 years under the rain without spark plugs.. that is really tough.
Thank you for sharing.
How did it end?
Damn he ignored the hell out of you. Rip
Did you get it ?
Diesel and a bit of oil mixture in all the cylinders and leave it sit. That will break up a lot of the rust. Keep in mind diesel will eat away rubber - which you will be replacing anyway - but keep that in mind. WD40 will not do jack shit. No idea why people keep using WD-40 for things its not intended for.
@@huskyvacs "Water Displacement 40" mentions nothing of penetration or derusting action.
there is a product called FREE ALL, i used it on my 2.2 mopar turbo motor is sat all winter last year and got flash rust on the cylinders,i'd pulled the pan a few years ago and it was a brand new short block installed in my car by a dealership years ago,this stuff i shot it down the cylinders and it freed up this new engine, used the whole can,i was desperate,is worked the engine runs ,no smoke just like it did,try it,i swear by it,its in a blue and silver can,i bought a whole case,now when i let engines sit, fill the cylinders thru spark plug holes,and make them wet before storage,shoot is down the intake real good prior to storage no surprises anymore,give it go,the stuff is 6.00 dollars a can worth it
Was gonna throw out my datsun’s engine, this video saved it!
Should take the tappet covers off first and make sure none of the valves are stuck, you don't want the piston hitting a stuck valve and bending it
I'm going to try this method. I bought a 56 F100 from my father in law have no idea how long it's been since it ran.
Very good video, one suggestion if I may, keep the camera close to you, the mic is on it. When you move too far from the camera, your audio drops right off
Love the kittens
First of all, yes, its most important to free the slugs AND protect the cylinder walls from scoring. So flooding the cylinders with a good thin lube product is the first step. But it is ALSO highly recommended to pull the valve covers and lube the valve guides and lube the rockers and lifters/ camshaft lobes. It a lot of cases though guys are planning to buy a hi pro cam and kit from the aftermarket, so....
I’m very impatient 🤣🤣 same here bro 💪🏼 great vid
Where do I put the trans oil in?? Spark plug holes?
Yes. Pour it in through the spark plug holes. Also a good idea to pour some into the intake manifold and to remove the valve covers and check for stuck valves.
In the hubcap
Be sure to drain the blinker fluid first.@@goldteethman8720
Got a ford 460 that had an oil pan full of water, been sitting for 7 years... Trying to get her to turn over.
How did that turn out? Same issue
What is the FX spray called so I can try it.
Hey guys. Just wanted to say I’m enjoying your channel and am glad to see it growing. I’ve started mine as well. I hope to do half as well as you guys. Keep it up!!
I have a 2012 Buick Lacrosse. My son ran the engine out of oil. It is sized. Can it be fixed?
Negative. Need new motor there.
Thanks for the video man
would love too see if this motor will start.. keep them coming .. great video
l used some used ATF + Acetone. Let it sit for a day before I started applying torque (back -n-forth). - Didnt budge much...
But. I kept it up over the next 3 days & it gradually started turning.
After a while, the Crank turns w/out difficulty
I just hope it's not too gouged on the cylindo walls. Will see.
That engine ain’t seized the fan is turning as he is pressure washing it?
That’s the water pump. Water pump can spin freely despite the motor being locked up
It'probably aclutch fan bingo,
Where is the next video where they try to start the engine?
What her doing a cat😂❤❤❤
Did Curly have the day off?
Lol
Do i see 2 kittys back there 😊😊😊😊
I love the cat's 😻😻😽😽
Cool
Thanks boys
Pour the trans. fluid down the carb. It' go to all the cylinders at once.
Its gonna be an oil burner unless you rebuild it. Cylinders are all pitted
lol that’s future us problem.
All lubrication comes from. Below
So, the Cat’s name is Jesus?
I'ts out of a car you can tell by the water neck
marvel works great to
Lol thought it was a gaming video
try ATF and Acetone - Maybe wait for 10 to 15 minutes B4 U turn over the engine
Yes, let’s hose down the old junkyard motor w a pressure washer……. What could it hurt at this point…..?🤣🤣🤣🤣
Pin your engine stand
Penatrin spray
Get a clip on microphone.
Yr ll
that engine isnt stuck