Thanks so much for making this video. I have an old Gilbert alarm clock that I will now attempt to fix following your video. Keep up the great work and thanks again!
Really helped me a lot buddy....I had my grandpa's JAYCO CANON clock sitting dead..... While assembling..I was stuck at figuring out the alarm mechanism.....your video gave an insight on that....
Hi, is this HES alarm clock is radium one. i too have one at home. after reading couple of article about radium alarm clock i am getting scare to keep this alarm clock. please suggest.
Hi I have a working condition HES clock . Where can I get it serviced. I live in ambala. Please let me know as it's my grandmother's clock and I love it very much
Sir, can you explain how to adjust the clock if it's running slow or fast? I guess the lever at the bottom is for that purpose but how much correction to be given?
I have a similar clock, I think its the same with just a different face design, my grandmother gave it to my sister few years ago but idk what my sister did but it just stopped working, I kept it with myself for a few years now as I couldnt trust my sister with it, I have opened it up but dont see any damage. When shaken the clock will work for a few seconds and sometimes for a few minutes, so I think cleaning should work as there is a little dust in there, when I kept it stored away it was fully winded and still seems to be the same, do you think that could affect the winding coil? also any suggestions on how to clean the gears and which oil to use, I'll just keep it disassembled till then. Update: The disassembly didnt go well, I couldnt remove the minute hand so I continued removing gears from the back without removing it, turned out to be a bad idea as it made the seconds hand deformed and bringing it back to shape made some of the paint coating fall off, i was able to put everything bad together, so all I did was just ruin the face of the watch and cut my hand for no reason, anyone else thinking of this please don't, just take it to a professional rather than risk damage to an important item.
I do put a disclaimer in every videos for the same reason, if you do work on a heirloom, you most likely end up causing one damage or the other, if it's your first time. I learnt after making many such mistakes, and am at a position where I'm confident enough now, to work on something important to me or someone. Don't worry though, all's not lost. If you still like to restore it, I can recommend a few places in Bangalore. Replacement hands are not impossible to find, and if it's a metal dial, you may be able to undo some damage too. To clean, usually kerosene, petrol, or some commercially available watch cleaning solutions are also used. You can message me with pictures on 9686951979, and I'll try to help to the best extant. The clock in this video is my grandfather's, and I understand how it feels if something happens to it. Sorry for late reply though, was busy with work
It's better to take it to a good watch mechanic. I can recommend a few places in Bangalore. If you are not from here, I can atleast guide you with general info on what can be done. If you want to learn, I would highly recommend buying scrap clocks to work on
Great video! Can you please tell me what would be a decent DIY solvent/solution for cleaning clock movement parts? Also what oil/grease is required for relubrication during assembly?
Well, I use an ammonia based watch cleaner. Even petrol or kerosene is used by some. Tbh, for a clocks brass movement, cleaning with a water with mild detergent to remove old oil and gunk is in itself sufficient to my knowledge. As far as oil is concerned, i use an oil made for clocks.
Moebius Large Clock oil is used for lubricating the pivots,lever pins and balance staff points. Elma/Olma /Klinso are the brand names of watch cleaning solution available in 1 litter /2 and 5 litter cans with watch part dealers. Need more info call back 8355997526.Love
Hi, I have kinzle duo alarm clock and I try to fix it but I can't put back the key now. Can you please help me. Also the alarm clock never works but when I tried to open it it started rinning and now it's not rinnging. Plz help me I want to fix this clock
Where are you from sir? It is available in Bangalore, and I'm sure it will be available in other major cities. If you are from Bangalore, I can give their contact. It's about 30 rs or so
Sir can you please tell me the name of part which you used at time 6:40, during restoring this part is broken by me and i have to buy it. So plz tell me it helps me lot
@@kishlaysingh5222 I have heard from mechanics, that can be repaired with wire or pin of the right size, though I haven't attempted it myself. If you know anyone in Bangalore, i can give details of a shop where you will get the whole lever.
I used a flat cutter/ end cutter to tighten them as I did not have the right tool back then. A right sized spanner should be the best. About the mainspring, you can get it in chickpet. You can message me on 9686951979 and I'll share the contact details of few shops there
There is no click in my HES and other HES I have seen too sir. The way what I follow is, I take out the balance wheel, then loosen the nut on the right bottom corner, by a few threads. Lift the plate up, but not too much, such that you can take out the Lever without damaging it , or any thing else. Make sure you don't dislodge other wheels out of their place too (If that happens, try correcting that carefully). The clock should start unwinding as soon as you take the Lever out. You can also stop the wheels inserting a long screwdriver or something while you take the Lever off, and then take that out and let it unwind. It works well for me. Take good care while doing it though.
Thank you Sir for your valuable suggestion....actually my HES alarm clock was dropped from my hand and it is working but stopped frequently...plz also suggest how to remove that problem😊
@@suvrojitmitraRailFan2893 tough to point out any issue sir. If you take it apart, observe for bent pivots, bent pins of Lever and anything that looks bad. A lot of things can be the cause, so tough to point out without checking its parts
@@ullasu1788 Dear friends: For all dropped time pieces it is very important to check the points of the balance staff and rectify.Nearly in all cases ,99%of the time it is the tip of the balance staff that needs your attention.You may have to grind it on a fine Corborandum slab available with hardware shops and also on the emery paper. Need further info call no.8355997526.Love
I think you are referring to the hairspring. It's better to buy the whole balance assembly. If you are in Bangalore, I can provide details of few shops who sell it.
@@ullasu1788 Thank you sir. I have been trying to contact various sellers on Indiamart with descriptions and pictures. The original spring was corroded and broke into powder pieces while disassembly. I have assembled the whole mechanism as per your video, but the spring is needed. Please provide me the details of the shops that sell it so that I can purchase the hairspring or the balance wheel cum hairspring.
I have the same watch, made in India but the seconds clock and watch is not working. Only alarm works when I set the time manually. What can be the issue? I live in mumbai and not able to find any repairman who can resolve it.
There are two seperate springs for the alarm and the going (clock) train sir. Have you wound both? If the clock dosen't run, there can be a lot of issues. To my knowledge, there are a lot of old watch and clock restorers in Mumbai. I'll try enquiring and let you know.
@@ullasu1788 yes I tried winding both but only alarm works when they are matched manually. Clock does not work. I tried winding the right one (clock running) for 20 30 times.
@@hiteshsharma9230 the issue could be simple, like a fallen hairspring pin, to complex like a broken mainspring, broken pivot, or it could just be that the clock needs a service. I will let you know if i come to know about anyone in Mumbai who works on them.
Hello. Thanks for the video, it's really helpful. I have a chess clock which one side is not working. Appearently it has no any problem. It looks as the main spring cannot transfere its energy to other parts. Do you have recommendation?
Well, if you can take apart the clock sir, try removing the mainspring from the wheel, assemble the geartrain, and check if all wheels are free. I have never worked on a chess clock, but I would believe it would have a similar arrangement
@@ullasu1788 Thanks a lot for fast response. You mean geartrain could be stuck... Well, it was very difficult to replace the it, but i will try this. Thanks again.
@@fizikchy It could be struck, or if it's built like the clock in this video (or most mechanical clocks) the holes could wear out and elongate. Old oil can get brittle and act as an abrasive, and can cause that. Old oil can also jam the gear train
@@ullasu1788 Thanks a lot. I solved the problem. It's just stuck. After removing the pallet and forcing the geartrain a little bit, mechanism started to work with stutters. Then used tiny amount of WD40 and set it 5-10 times. Now it works well. Thanks again.
@@fizikchy glad to be of any help. My advice is, if possible, to clean the mechanism with balance and pallet removed and then to use clock oil. Old oil, if left behind, may cause further damage. Good to know it's running now😁
I enjoy your video..my mechanical wind up HES alarm clock is losing 10 mins per day......plz suggest me a technique by which I can regulate beat rate of this kind of mechanical wind up alarm clock
If it is just a regulation issue sir, just advance the regulator towards the '+' side. Usually, upto +/- 10-15min can be adjusted with regulator. However, it may be because of an underlying problem. Make sure clock has been serviced recently.
Unfortunately my hes alarm clock suddenly falls down from my hand and at the particular position the clock stops to work but when it is kept on the table it runs smoothly...Sir is there any problem in pin pallet fork?
If it's something important to you, I suggest not to work on it by yourself, but get it done by a mechanic. If you are fine with any outcome of the clock, then you can attempt it. There are a few tutorials online and documentation which you can refer. I learnt by such online resources and trial and error
@@nishantbadh4165 oh, then I don't know. If you know someone in Bangalore who can buy it here and send it over to you, that's good too. Otherwise, if I'll see if i can enquire about shops in Gujrat
These clocks are not made new bro, nowadays. Old clocks, working should probably cost around Rs. 500ish. They don't have any particular advantage over modern clocks, but are mainly collected as they are vintage.
With due respect The main springs should be partially wound in anti clock motion to form coil and then fitted with the main wheels and set in the framework. Wheels can be set within the framework after thorough cleaning and the pivots checked and the respective holes checked and corrected for proper alignment. Lever pins if worn out to be adjusted or replaced if fully worn out.Bearing screws to be thoroughly cleaned and checked for wear and tear.Balance staff to be replaced if short or polished to a conical shape and finally refitted with the plate. Mere assembling and dismantling doesn't mean servicing. Before completing all these aspects the total machinery needs to be cleaned in ammonium solution and rinsed in alcohol or white petrol, properly dried and refitted.Oiling to be done at the tail part of the servicing activity Read books on horology by Sir Isaac Pitman or borrow books from British Council,Mumbai. Love.
Dear sir, thank you for your input. I have no where mentioned, including in the title of the video, that this is a clock service video. I took the video of just the assembly. I had cleaned the clock, check the alignment and condition of pivots and lever, dried the parts and then started this. I do agree that I have made mistakes. I am self thought. I do this as a hobby on my own watches and clocks and the tools and supplies I have are limited. I'm more comfortable with watches than I'm with clocks, and I'm trying to learn and improve my skills as much as I can. In this regard, the books you have mentioned should be invaluable. I'll search those books and I will definitely refer them.
Sir, also, I didn't understand the part about the mainspring, could you please elaborate if possible? As I have a couple of more clocks that I plan to work on in coming days, I will try as you mentioned on those clocks.
GM I am willing to assist you free of cost. If you can call on my number 8355997526 between 10.45 to 1.30 pm any day. Presently I am in Bangalore and shall return to Ambarnath (Maharashtra) in due course.Love.
@@saisamayseva8712 Thank you sir, will contact you. I am presently having my academic end semester presentations this week. Would it be ok to call after that?
@@ullasu1788 Yes.Please pay attention to your academics first.The topic of horology can be discussed any time later on. Normally people are eager to make money out of this in a quick manner but without knowledge and a few years hard work it is not possible. The rule here is listen, see, learn and earn honestly.If you are ready for this I am ever ready to help.All the best.Study well.Love
@@thetechexpert4887 my disclaimer is to discourage anyone using this video as a guide to reassemble a mechanical clock, not to entirely stop them from doing so. It's good to understand some basics, which are definitely not conveyed in this video, for the safety of the person attempting it
Dear, I have been repairing wall clocks, table timepieces since 1964 at the age of 10. But even at that time I was doing job much better than you. Please go to a training center to learn some more and be perfect.
Dear Friend: Without talking no body can teach or learn.Pl be specific and forward pic of the time pc you are handling, may be you will be able to follow the guidelines. Love
There would be a small pin on the gear that sets alarm. If that has fallen out of place, that will cause such issues usually. To check, try rotating the alarm hand 360 degrees. At one point, you should hear a 'click'. If you don't, the pin may have fallen off or broken. It can be replaced with an ordinary needle, cut to size. You have to remove the hands and dial to access it
@@ullasu1788 hey. Thank you for such detailed answer. I checked. The pin is there. But there is no click sound. The small pin is moving freely so that is why there is no click sound. Does the pin get loose or something too? Cause i saw. There was a small place where the pin should rest. But it not resting at that place and moving freely 360°
@@dheerendrabinwal it can get loose, or sometimes it can catch the alarm wheel and spin with it too. It can also be that, a kind of spring, which should push the alarm setting wheel against the pin is somewhat weak, and not doing it's job sir. If you can see the pin, and if you can send a picture of the same, i may be able to say what is the issue
This video helped me a lot in reassembling my grandfathers HES clock. Thanks a ton! keep it up!
Thanks so much for making this video. I have an old Gilbert alarm clock that I will now attempt to fix following your video. Keep up the great work and thanks again!
Thanks Brother., Your video helped me to restore our HES clock.
Really helped me a lot buddy....I had my grandpa's JAYCO CANON clock sitting dead.....
While assembling..I was stuck at figuring out the alarm mechanism.....your video gave an insight on that....
Hi, is this HES alarm clock is radium one. i too have one at home. after reading couple of article about radium alarm clock i am getting scare to keep this alarm clock. please suggest.
Awesome bro , I'm having my grand pa's HES Sarang alarm clock
Hi I have a working condition HES clock . Where can I get it serviced. I live in ambala. Please let me know as it's my grandmother's clock and I love it very much
When did hes clocks stopped their production
Sir, can you explain how to adjust the clock if it's running slow or fast? I guess the lever at the bottom is for that purpose but how much correction to be given?
From where i can purchase balence wheel and spring of this type clock..mine one is damaged
10:38 nice❤❤❤😍😍😍...the clock is perfectly in beat😍😍😍😍😍
Unable to set alarm. How to fix that?
Alarm hand is moving but unable to set alarm.
Could be that the pin that sets the alarm is broken or fallen off. Usually, a sewing needle cut to size can be used to fix that
You can see me inserting that pin at 6:05. Sorry for the late response btw
I am from UP and 65 km away from Delhi can you plz suggest me where I can repair my watch
I have a similar clock, I think its the same with just a different face design, my grandmother gave it to my sister few years ago but idk what my sister did but it just stopped working, I kept it with myself for a few years now as I couldnt trust my sister with it, I have opened it up but dont see any damage. When shaken the clock will work for a few seconds and sometimes for a few minutes, so I think cleaning should work as there is a little dust in there, when I kept it stored away it was fully winded and still seems to be the same, do you think that could affect the winding coil? also any suggestions on how to clean the gears and which oil to use, I'll just keep it disassembled till then.
Update: The disassembly didnt go well, I couldnt remove the minute hand so I continued removing gears from the back without removing it, turned out to be a bad idea as it made the seconds hand deformed and bringing it back to shape made some of the paint coating fall off, i was able to put everything bad together, so all I did was just ruin the face of the watch and cut my hand for no reason, anyone else thinking of this please don't, just take it to a professional rather than risk damage to an important item.
I do put a disclaimer in every videos for the same reason, if you do work on a heirloom, you most likely end up causing one damage or the other, if it's your first time. I learnt after making many such mistakes, and am at a position where I'm confident enough now, to work on something important to me or someone. Don't worry though, all's not lost. If you still like to restore it, I can recommend a few places in Bangalore. Replacement hands are not impossible to find, and if it's a metal dial, you may be able to undo some damage too. To clean, usually kerosene, petrol, or some commercially available watch cleaning solutions are also used. You can message me with pictures on 9686951979, and I'll try to help to the best extant. The clock in this video is my grandfather's, and I understand how it feels if something happens to it. Sorry for late reply though, was busy with work
It's better to take it to a good watch mechanic. I can recommend a few places in Bangalore. If you are not from here, I can atleast guide you with general info on what can be done. If you want to learn, I would highly recommend buying scrap clocks to work on
HES alarm clock in movement made in czechoslovakia (chromotechna)
Great video! Can you please tell me what would be a decent DIY solvent/solution for cleaning clock movement parts? Also what oil/grease is required for relubrication during assembly?
Well, I use an ammonia based watch cleaner. Even petrol or kerosene is used by some. Tbh, for a clocks brass movement, cleaning with a water with mild detergent to remove old oil and gunk is in itself sufficient to my knowledge. As far as oil is concerned, i use an oil made for clocks.
Moebius Large Clock oil is used for lubricating the pivots,lever pins and balance staff points. Elma/Olma /Klinso are the brand names of watch cleaning solution available in 1 litter /2 and 5 litter cans with watch part dealers.
Need more info call back 8355997526.Love
You can use WD40 , I tried on My grandfather's clock and it started working fine since 2 months.
@@jaiminvadher4 Never use WD40, it will make your clock run but in the long time it will destroy the clock.
thank you your videos very good hardworking I like it very very much wery interesting works thanks so much ok
Hi, I have kinzle duo alarm clock and I try to fix it but I can't put back the key now. Can you please help me. Also the alarm clock never works but when I tried to open it it started rinning and now it's not rinnging. Plz help me I want to fix this clock
sir i have a hes clock but not working condition. u can reoair my alarm clock
Bhai...i need help...my colcks centre rod is not working! Wt can i do
Center rod? Can you please describe?
@@ullasu1788 the rod which attach needle in front
Vo bhai...spin hota hai..par rod ko chodkar spin hojatha hai...jiskivajese whole clock work hota hai..par needle move nahi hota hai
I have same watch but some problem where could I repair
If you live in Bangalore, I can recommend few places
My wind spring broken bro can u help is it still available anywhere
Where are you from sir? It is available in Bangalore, and I'm sure it will be available in other major cities. If you are from Bangalore, I can give their contact. It's about 30 rs or so
कहाँ मिलेगी यह घड़ी?
Дякую вам за працю, хай щастить
Sir can you please tell me the name of part which you used at time 6:40, during restoring this part is broken by me and i have to buy it. So plz tell me it helps me lot
You can refer to it as the lever sir, it should be available easily in shops selling clock spares. Where is it broken?
@@ullasu1788 I am from Patna, Bihar and thanks for reply.
@@kishlaysingh5222 I meant, where is the part broken? Is it a broken pin, or a pivot?
@@ullasu1788 Broken pin
@@kishlaysingh5222 I have heard from mechanics, that can be repaired with wire or pin of the right size, though I haven't attempted it myself. If you know anyone in Bangalore, i can give details of a shop where you will get the whole lever.
Isme jo butterfly wala part hai woh kaha fit hota hai
Sir I am very happy about this video but FEW days back I clock movement key spring cutter so can u please tell me where it will be available
Where are you located sir? If in Bangalore, i can give some shops address.
What BPH is this clock?
Excellent Effort !! Interesting video
Hi, what is the name of the tool you used to tight those nuts?. And I am from Bangalore, Pls help me to get some hair springs for my clocks.
I used a flat cutter/ end cutter to tighten them as I did not have the right tool back then. A right sized spanner should be the best. About the mainspring, you can get it in chickpet. You can message me on 9686951979 and I'll share the contact details of few shops there
Sir plz suggest me that how I can unwind the main spring where there is no click assembly like HES alarm clock
There is no click in my HES and other HES I have seen too sir. The way what I follow is, I take out the balance wheel, then loosen the nut on the right bottom corner, by a few threads. Lift the plate up, but not too much, such that you can take out the Lever without damaging it , or any thing else. Make sure you don't dislodge other wheels out of their place too (If that happens, try correcting that carefully). The clock should start unwinding as soon as you take the Lever out. You can also stop the wheels inserting a long screwdriver or something while you take the Lever off, and then take that out and let it unwind. It works well for me. Take good care while doing it though.
Thank you Sir for your valuable suggestion....actually my HES alarm clock was dropped from my hand and it is working but stopped frequently...plz also suggest how to remove that problem😊
@@suvrojitmitraRailFan2893 tough to point out any issue sir. If you take it apart, observe for bent pivots, bent pins of Lever and anything that looks bad. A lot of things can be the cause, so tough to point out without checking its parts
@@ullasu1788
Dear friends:
For all dropped time pieces it is very important to check the points of the balance staff and rectify.Nearly in all cases ,99%of the time it is the tip of the balance staff that needs your attention.You may have to grind it on a fine Corborandum slab available with hardware shops and also on the emery paper.
Need further info call no.8355997526.Love
Sir I have faver leuba clock all parts have in clock but I can't assemble it plz help me
That spring at 8: 20 where can I purchase it
I think you are referring to the hairspring. It's better to buy the whole balance assembly. If you are in Bangalore, I can provide details of few shops who sell it.
@@ullasu1788 Thank you sir. I have been trying to contact various sellers on Indiamart with descriptions and pictures. The original spring was corroded and broke into powder pieces while disassembly. I have assembled the whole mechanism as per your video, but the spring is needed. Please provide me the details of the shops that sell it so that I can purchase the hairspring or the balance wheel cum hairspring.
@@Pix2Play please do message me on 9686951979, and I can share a few shop details.
I have the same watch, made in India but the seconds clock and watch is not working. Only alarm works when I set the time manually. What can be the issue? I live in mumbai and not able to find any repairman who can resolve it.
There are two seperate springs for the alarm and the going (clock) train sir. Have you wound both? If the clock dosen't run, there can be a lot of issues. To my knowledge, there are a lot of old watch and clock restorers in Mumbai. I'll try enquiring and let you know.
@@ullasu1788 yes I tried winding both but only alarm works when they are matched manually. Clock does not work. I tried winding the right one (clock running) for 20 30 times.
@@hiteshsharma9230 the issue could be simple, like a fallen hairspring pin, to complex like a broken mainspring, broken pivot, or it could just be that the clock needs a service. I will let you know if i come to know about anyone in Mumbai who works on them.
Hello. Thanks for the video, it's really helpful. I have a chess clock which one side is not working. Appearently it has no any problem. It looks as the main spring cannot transfere its energy to other parts. Do you have recommendation?
Well, if you can take apart the clock sir, try removing the mainspring from the wheel, assemble the geartrain, and check if all wheels are free. I have never worked on a chess clock, but I would believe it would have a similar arrangement
@@ullasu1788 Thanks a lot for fast response. You mean geartrain could be stuck... Well, it was very difficult to replace the it, but i will try this. Thanks again.
@@fizikchy It could be struck, or if it's built like the clock in this video (or most mechanical clocks) the holes could wear out and elongate. Old oil can get brittle and act as an abrasive, and can cause that. Old oil can also jam the gear train
@@ullasu1788 Thanks a lot. I solved the problem. It's just stuck. After removing the pallet and forcing the geartrain a little bit, mechanism started to work with stutters. Then used tiny amount of WD40 and set it 5-10 times. Now it works well. Thanks again.
@@fizikchy glad to be of any help. My advice is, if possible, to clean the mechanism with balance and pallet removed and then to use clock oil. Old oil, if left behind, may cause further damage. Good to know it's running now😁
Awesome bro.i need the spare keys and alerm stop button assembly.im from Bangalore.
You can message me on 9686951979, I can send adresses and contacts of spares shops in Bangalore
Shivaji Nagar, Commercial Street ,Bangalore near the church is the area where you will get these items.Love
Really useful...searching for this sometime
I enjoy your video..my mechanical wind up HES alarm clock is losing 10 mins per day......plz suggest me a technique by which I can regulate beat rate of this kind of mechanical wind up alarm clock
If it is just a regulation issue sir, just advance the regulator towards the '+' side. Usually, upto +/- 10-15min can be adjusted with regulator. However, it may be because of an underlying problem. Make sure clock has been serviced recently.
Yes Sir...it has serviced just four days ago
Unfortunately my hes alarm clock suddenly falls down from my hand and at the particular position the clock stops to work but when it is kept on the table it runs smoothly...Sir is there any problem in pin pallet fork?
@@suvrojitmitraRailFan2893 I would suspect the balance wheel may be bad. Uneven wear of its tips can cause such a behaviour
Do you know any place in Bangalore to buy these?
To buy a clock or the parts sir?
@@ullasu1788 clock :-)
I will provide u if you can buy...
How many joules of energy store by spring
I am not aware of that sir. No technical documentation is available online to my knowledge. I would love to know though.
i also hv these typ of clock but its nt wrking hw i cn repare
If it's something important to you, I suggest not to work on it by yourself, but get it done by a mechanic. If you are fine with any outcome of the clock, then you can attempt it. There are a few tutorials online and documentation which you can refer. I learnt by such online resources and trial and error
Awesome brother I need spare key and that big wheel spring please can u help me
If you are from Bangalore sir, I can let you know the shop details here
Ullas U No I’m From Gujarat
@@nishantbadh4165 oh, then I don't know. If you know someone in Bangalore who can buy it here and send it over to you, that's good too. Otherwise, if I'll see if i can enquire about shops in Gujrat
Ullas U Okay Can u send it to me direct ?
Bro I too have the same clock some part of the vedio is too fast couldn't do it properly please give me solution
It's not a tutorial, i just wanted to make an assembly video. I will try to make a tutorial sometime.
@@ullasu1788 OK bro I'm waiting I couldn't Assemble it properly
@@abizvid4780 Will surely make one when possible
Bro wt is the recent price for this clock and wts the advantage of these kind of clock pls let me know bro!!
These clocks are not made new bro, nowadays. Old clocks, working should probably cost around Rs. 500ish. They don't have any particular advantage over modern clocks, but are mainly collected as they are vintage.
500ish what price
Well done sir. Please keep it up.
Thank you sir
Brother what is the cost of this type clock
Should probably cost around 3-400 nowadays. These are not manufactured new, but are usually used.
Depends mostly on the condition
Thank you 😊😊 .
Glad to be of any help
Very nice. I have one of these. The glass is broken though. Need to change it.
These clocks use regular plain glass. If you can get a glass cut in circular shape, with proper diameter, it is easy to change it
I want the same watch spring
Is available then please tell me
I know few shops in Bangalore where you can get it sir
Bhai mere pass bhi yhi alarm clock hai mujhe thik krana hai..
My hindi is very bad bro. If i understand you right, you have an alarm clock like this, which you want to get repaired?
@@ullasu1788 yes bro. Help me.
Where are you from bro??
@@yogeshgautam6222 I am from Bangalore bro
Ullas U bhai kaise thik kro
Je n'arrive pas à le faire
Can you please restore my HES watch
With due respect
The main springs should be partially wound in anti clock motion to form coil and then fitted with the main wheels and set in the framework. Wheels can be set within the framework after thorough cleaning and the pivots checked and the respective holes checked and corrected for proper alignment. Lever pins if worn out to be adjusted or replaced if fully worn out.Bearing screws to be thoroughly cleaned and checked for wear and tear.Balance staff to be replaced if short or polished to a conical shape and finally refitted with the plate.
Mere assembling and dismantling doesn't mean servicing. Before completing all these aspects the total machinery needs to be cleaned in ammonium solution and rinsed in alcohol or white petrol, properly dried and refitted.Oiling to be done at the tail part of the servicing activity
Read books on horology by Sir Isaac Pitman or borrow books from British Council,Mumbai. Love.
Dear sir, thank you for your input. I have no where mentioned, including in the title of the video, that this is a clock service video. I took the video of just the assembly. I had cleaned the clock, check the alignment and condition of pivots and lever, dried the parts and then started this. I do agree that I have made mistakes. I am self thought. I do this as a hobby on my own watches and clocks and the tools and supplies I have are limited. I'm more comfortable with watches than I'm with clocks, and I'm trying to learn and improve my skills as much as I can. In this regard, the books you have mentioned should be invaluable. I'll search those books and I will definitely refer them.
Sir, also, I didn't understand the part about the mainspring, could you please elaborate if possible? As I have a couple of more clocks that I plan to work on in coming days, I will try as you mentioned on those clocks.
GM
I am willing to assist you free of cost. If you can call on my number 8355997526 between 10.45 to 1.30 pm any day. Presently I am in Bangalore and shall return to Ambarnath (Maharashtra) in due course.Love.
@@saisamayseva8712 Thank you sir, will contact you. I am presently having my academic end semester presentations this week. Would it be ok to call after that?
@@ullasu1788
Yes.Please pay attention to your academics first.The topic of horology can be discussed any time later on. Normally people are eager to make money out of this in a quick manner but without knowledge and a few years hard work it is not possible. The rule here is listen, see, learn and earn honestly.If you are ready for this I am ever ready to help.All the best.Study well.Love
Nice video but the disclaimer on the bottom makes me a bit mad.😠
Why is that so😅
@@ullasu1788 Because that do not attempt means that I can't reassemble a mechanical clock.
@@thetechexpert4887 my disclaimer is to discourage anyone using this video as a guide to reassemble a mechanical clock, not to entirely stop them from doing so. It's good to understand some basics, which are definitely not conveyed in this video, for the safety of the person attempting it
التصوير سيء جدا، احتجت إلى فهم مرحلة تركيب النابض الصغير الأخير لكن الصورة لم تكن واضحة ابدا
bro i also have this watch but not work
please repair my watch also
I do this just as a hobby bro. If you are in Bangalore, I can provide contacts of watch mechanics.
My father used to work in HES company
Apki spid jayada hey
Terimakasih atas ilmunya...
Please make again video same
I don't have a proper camera setup sir, I will probably in future
Meri watch ka hour hand struck ho gaya hai
Kaise theek karu wo alarm ke saath ghum raha hai. Plz bro
@@digvijaysingh8000 my hindi is bad, but if i understand you right, the hour hand rotates while you set alarm?
@@ullasu1788 yes correct. And it does not rotating with minute hand. What should i do.
@@digvijaysingh8000 aap kaha se ho
@@Mukeshkumar-qt9ld rajasthan
Kya aap mere clock ko bana denge
Clock Hes clear see every one part
I have a different alarm clock, so this video is useless
Вчу на вашому відео мого онука 😊
Dear, I have been repairing wall clocks, table timepieces since 1964 at the age of 10. But even at that time I was doing job much better than you.
Please go to a training center to learn some more and be perfect.
adress in 2023
Way to much talking..... I 'm working on a very old Ingraham Alarm it's about the size of the HES.
I didn't get you sir, talking?
Dear Friend:
Without talking no body can teach or learn.Pl be specific and forward pic of the time pc you are handling, may be you will be able to follow the guidelines. Love
Unable to set alarm. How to fix that?
Alarm hand is moving but unable to set alarm.
There would be a small pin on the gear that sets alarm. If that has fallen out of place, that will cause such issues usually. To check, try rotating the alarm hand 360 degrees. At one point, you should hear a 'click'. If you don't, the pin may have fallen off or broken. It can be replaced with an ordinary needle, cut to size. You have to remove the hands and dial to access it
@@ullasu1788 hey. Thank you for such detailed answer. I checked. The pin is there. But there is no click sound. The small pin is moving freely so that is why there is no click sound. Does the pin get loose or something too? Cause i saw. There was a small place where the pin should rest. But it not resting at that place and moving freely 360°
@@dheerendrabinwal it can get loose, or sometimes it can catch the alarm wheel and spin with it too. It can also be that, a kind of spring, which should push the alarm setting wheel against the pin is somewhat weak, and not doing it's job sir. If you can see the pin, and if you can send a picture of the same, i may be able to say what is the issue