Great job showing us the process. I like how you removed the E clip without loosing it. I sure do like the motor mount. I wish the 3s Arrma line of cars came with that setup.
Great video! Can you please tell me what size Hex/allen bolts are at the top that holds the motor to the motor mount. I have tried different allen wrenches and i cant find the right size. Thank you
@@g.b-MTB-trail-jumps3062 lol that was right out da box brah, it’s my Notorious that I’m having issues with, seems like every time I try to upgrade, I end up F’n something up somehow. It almost seems stock parts is best .
Thanks for coment mate🤙 You can see on the "manual book"..not to tide and not to loose.. Small gap and small playing. How to check isely..? On cassis you have hole...with the spur,play with him and you can feel small gap or big gap...hear the 'nak'..(spor nak on the pinion.) Sory about my write..😁 Enjoy bro...good luck
why would you take the motor out? i put a magnet under the pinion to catch the circlip. pushed it off from above than all you need to do is line up the set screw with the slot in the motor mount like you have to do even if you take the motor out. putting it back together is just as easy, remember to put a magnet under there again in case the circlip pops off while trying to put it back on but i didnt have any issues.
Changed my kraton v5 to the 15 tooth pinion today. Thanks for the video. The stock 12 tooth stripped. Do you think the 15 tooth will overheat the motor?
@@g.b-MTB-trail-jumps3062 Hi, i mean to warm the pinion which flame lighter do you use? Moreover when you fit the new pinion, you forgot the crush tube that fits into the shaft or no? Grazie
Yes bro..you can. Like v4,v3...ther is no e clip. This is just in case that pinion no go out from the shuft. Just be shur the pinion screw tide good. Good luck bro..thanks for coment
Lol right plus the small spacer filling, the "C-Ring" an the gear , 🤣🤣🤣so you don't show people how to secure the gap behind the gear an between the gear an the c-ring just depend on the grub screw people. The cats got this guy's tongue people 🤣🤣🤣 I hope people not blind because it's all kinds of stuff missing with this one here , WHERE THE MUSIC COME FROM 🤣🤣 I'm having a hard time trying to find something to subscribe to . WHERE THAT DOG AT THAT'S BARKING IN THE BACK GROUND 🤣WHAT HE OR SHE BARKING ABOUT . let's find out what's going on 🤣
@@g.b-MTB-trail-jumps3062 i have the arrma typhon 2s and 3s and just got the 6s kraton....my 2nd drive with 3s typhon the motor blew......anyway i don't know sh t about rc im learning..i just turned 45 today...i like driving my cars but i think it makes me happier when i see other people enjoying too much appreciated ✌🇺🇸 6/12/21 were still free✌
@@BA-ev4cq great hobby mate...😇. Du good maintenance..its the best way to get full power from your kraton. My kraton v5 6s, 6slipo,50spur (Stock), 20 pinion
I’m three days in to the RC world. I just finished a run, pulled the body off to remove the battery and found my pinion gear laying on the floor of the chassis with no clip anywhere to be found
@@g.b-MTB-trail-jumps3062 not sure I guess I'm getting the gears to close together ill put it in then try to run it and it makes a loud ads sound like they are grinding together but if I pull it out then the pinion doesn't even catch the spur I guess it just trial and error
Yes I know ... Do not worry bro it's just a practic. Look...you need to put the pinion much closer as you can...than pul out little bit..you need small gap between them..and than tide one screw..and chek.. If it is ok...tide the secend screwe
yes yes you got it out all too easy i got the screw stuck where you remove the motor and the fucking screw in the pinion i tryined cut it out of it whit dremel :DD
@@g.b-MTB-trail-jumps3062 btw i need buy for it maybe new motor if i buy i take 1650kv but gonna be mext year stuff then... i did try cut the pinion off but idk where is the screw anymore i think i did cut it already off but cant take still the pinion out of it
![MTB [Enduro bike]- jumps&Trail](http://yt3.ggpht.com/JNVB7ipbAVhwWpLWbvmdvuH_T3JprPmKB_65xLijW19E5_naULcUziExbVZ7gUk0GrwsWeBCDw=s48-c-k-c0x00ffffff-no-rj)
Great job showing us the process. I like how you removed the E clip without loosing it. I sure do like the motor mount. I wish the 3s Arrma line of cars came with that setup.
cool bro...thanks👌
Great video! Can you please tell me what size Hex/allen bolts are at the top that holds the motor to the motor mount. I have tried different allen wrenches and i cant find the right size. Thank you
thanks mate. its 2.5 mm allen
Thank you very much for this video man. Helped me so much. Straight forward no bullshit talk etc thanks again
Thanks alot champ👑
brilliant video thanks ,exactly the same as last comment ,just plain informative and good ,helped me sort my truck out thanks again
Thanks alot mate
great video. thanks for the instructions. I would shorten the video a little bit though. waaay to long. thx again
thanks ,mate💪😎
Perfect length for a Newbie tho. I feel like I can do this now. Just blew my Pinion out!
Nice, I always appreciate the part numbers
Thanks champ
Looks who's ready to go even faster...
Good vid, Awesome stuff! Keep it up!
Thanks
Awesome to have this information on that model. Thx.
Thanks alot bro
Great instructional video! New sub here! Thumbs up!
thanks alot champ
If the pinion is not perfectly straight with the spur gear, what type of issues could you expect?
You must straight...
Release the small 'pinion screw'...and fit him to the spur... And than tide..
Thanks for coment bro
I cant coment on your 8s power outcast vid😇
@@g.b-MTB-trail-jumps3062 thanks for the feedback brotha.
@@g.b-MTB-trail-jumps3062 lol that was right out da box brah, it’s my Notorious that I’m having issues with, seems like every time I try to upgrade, I end up F’n something up somehow. It almost seems stock parts is best .
I have everything unbolted but my motor doesn't want to slide out any tips?
Thanks for coment bro
If the two screws are loose he should come out, maybe play with him until he comes out
What size is the grub screw and are the pinions .06 mod
Thanks for comment champ
Its Mod 1 5mm
You can see in "amainhobby" site. Arrma kraton 6s pinion...
an easy-to-understand picture.. greetings from Malaysia
Tjanks
@@g.b-MTB-trail-jumps3062 don't forget to support my channel again friend...
@@mohdfaizalajun_tv sure bro..great view. I already write😇
Many thanks! Love your straight to point video! My only question, how do u know your pinion and main gear are meshed properly?
Thanks for coment mate🤙
You can see on the "manual book"..not to tide and not to loose..
Small gap and small playing.
How to check isely..?
On cassis you have hole...with the spur,play with him and you can feel small gap or big gap...hear the 'nak'..(spor nak on the pinion.)
Sory about my write..😁
Enjoy bro...good luck
Great info. To the point & easy to follow. Well done my friend 👍👍
Thanks alot mate...enjoy
Glad I played the Operation board game as a kid!
Hahaha...good luck bro...enjoy🎉
Very good work friend☺️💪💪👍
Thanks champ
Any Heating Issues When Installing The 20t Pinion Gear?
Its high pinion....but im little crazy😇
I have also two fans on the motor.
You can put 16 pinion if you run on 6s
Thanks champ
@g.b jumps & bashing Cool! Do Have A Running Video??
Thank man, very good video... I put a washer between pignon and cruscher clip
Thanks mate
why would you take the motor out? i put a magnet under the pinion to catch the circlip. pushed it off from above than all you need to do is line up the set screw with the slot in the motor mount like you have to do even if you take the motor out. putting it back together is just as easy, remember to put a magnet under there again in case the circlip pops off while trying to put it back on but i didnt have any issues.
Thanks bro
Great job, so amazing to watch your video 💯💯💯💯💯
Thanks alot mate
Changed my kraton v5 to the 15 tooth pinion today. Thanks for the video. The stock 12 tooth stripped. Do you think the 15 tooth will overheat the motor?
Thanks mate
You run 4s or 6s?
You have fan on motor?
@@g.b-MTB-trail-jumps3062 6s and yes I have a heatsink and fan on motor
You can go until 18...and check hit sometime..
@@g.b-MTB-trail-jumps3062 thanks for reply!
Nice 👍 work
@@mauricebooker1519 thanks champ😍
@@mauricebooker1519 thanks mate
Ciao, for heating what do you use exactly? Can tour link it? grazie!
Sory bro...
You mean wich fan i us for the engine and esc?
For heating...?
Im us for fans...
@@g.b-MTB-trail-jumps3062 Hi, i mean to warm the pinion which flame lighter do you use? Moreover when you fit the new pinion, you forgot the crush tube that fits into the shaft or no? Grazie
@@oloap72 effettivamente il pignone risulta più corto, io davanti e dietro ho messo dei distanziali di plastica
Just curious but why take the top brace thing off?
Thanks bro...
You mean the "e clip "
@@g.b-MTB-trail-jumps3062 No the the handle thing above the center diff
@@chuckdzx More comfortable to work that it is disassembled bro
@@g.b-MTB-trail-jumps3062 Cool,prolly easier to set gear mesh
Great video mate 😊😊😊
Thanks champ
I am waiting for e clips. Would I be okay to run my 15 tooth pinion once or twice without it in place?
Thanks
Yes bro..you can. Like v4,v3...ther is no e clip. This is just in case that pinion no go out from the shuft.
Just be shur the pinion screw tide good. Good luck bro..thanks for coment
@@g.b-MTB-trail-jumps3062 Thanks. I am now going bashing. 🤟👍
where is the new video friends..why haven't you uploaded it yet..I think videos like this are very interesting..let's try again.
Thanks champ...you need help?
thank you for this fantastic video 👌
Thanks alot mate
@@g.b-MTB-trail-jumps3062 have a nice day 🙌
Love your content My friend and keep in touch
thanks mate
Great Video! Helped me out big time!
Thanks alots bro...
Dont forget subs. 👑
Thanks brother it’s so helpful
(Do you play PUBG?)
Thanks mate..
No brotha..😕
Nice job bro :)
Thanks bro
Good way to help those that need some pointers. 🎯✊🏽 merry Christmas champ 🎄
Thanks champ👑
Very good Video 👍
thanks alot champ
very nice rc car guys, looks very expensive
thanks mate
Awesome RC. Very cool bro.
Thanks bro👑
So do you not need the crush thing
Yes bro...you need. This is kinde of "spacer"
@@g.b-MTB-trail-jumps3062 thanks man I enjoyed your vids today
Yeah I watched the video I put it back together without the crush ring because in your video it doesn't show put it back in
Thanks for turtorial bro🎉🎉🎉👍
Thanks champ
Nice replacement these cars are very nice 👍👍🔥🔥
Thanks
Wat was the torch for ?
thanks for coment bro...what ?
Wow , amazing work !🏅🏆👍🏻🎩👌🏻
Thanks mate
Wow, super 👍 !
thanks mate
*Thank you for sharing a good video with a nice car!~~~^_^*
Thanks mate
You literally skipped steps do we leave the crush tube out??? Who knows very bad information
Honestly
Lol right plus the small spacer filling, the "C-Ring" an the gear , 🤣🤣🤣so you don't show people how to secure the gap behind the gear an between the gear an the c-ring just depend on the grub screw people. The cats got this guy's tongue people 🤣🤣🤣 I hope people not blind because it's all kinds of stuff missing with this one here , WHERE THE MUSIC COME FROM 🤣🤣 I'm having a hard time trying to find something to subscribe to . WHERE THAT DOG AT THAT'S BARKING IN THE BACK GROUND 🤣WHAT HE OR SHE BARKING ABOUT . let's find out what's going on 🤣
@@thomassullivan3703 lol the music is to much of a vibe it’s distracting 😂😂😂😂
Which lipos do u use? 4s or 6s?
Thanks for coment bro..
Im runing just 6s
With motor fun ..
i love those e clips lost alot !
Right dude...
Thanks
good job buddy👍🏻
Thanks dude👑
Was machst n du hier. . .😇🤘
@@chrissmarduksrccarcarnage4940 ist ein abbonent! der junge ist top! macht geile vids und hat megageile karren!🏎💨💯
some high quality work on this today
Enjoy champ
Good vid man!!!
Thanks bro👑
@@g.b-MTB-trail-jumps3062 i have the arrma typhon 2s and 3s and just got the 6s kraton....my 2nd drive with 3s typhon the motor blew......anyway i don't know sh t about rc im learning..i just turned 45 today...i like driving my cars but i think it makes me happier when i see other people enjoying too much appreciated ✌🇺🇸 6/12/21 were still free✌
@@BA-ev4cq great hobby mate...😇.
Du good maintenance..its the best way to get full power from your kraton. My kraton v5 6s, 6slipo,50spur (Stock), 20 pinion
great video
Thanks mate
ماشاءالله
You forgot threadloack on the motor mounting screws
Thanks alot bro
Thank you for sharing good information.
Thanks bro👑
I’m three days in to the RC world. I just finished a run, pulled the body off to remove the battery and found my pinion gear laying on the floor of the chassis with no clip anywhere to be found
😕
yes...the clips somtimes run out
just tide the screw of the pinion...and maybe some locktide
thanks mate
Looks awesome Man...Go and bash this clean Thing through the mud...😇🤘
Thanks brotha🤙
Buen video 👌 nice vídeo thanks
Thanks champ👌
Video good friend👍👍💯💯
Thanks dude
good explaination👍
Thanks dude
I can't get the mesh right
Thanks for coment dud..
Why..?
@@g.b-MTB-trail-jumps3062 not sure I guess I'm getting the gears to close together ill put it in then try to run it and it makes a loud ads sound like they are grinding together but if I pull it out then the pinion doesn't even catch the spur I guess it just trial and error
Yes I know ... Do not worry bro it's just a practic.
Look...you need to put the pinion much closer as you can...than pul out little bit..you need small gap between them..and than tide one screw..and chek.. If it is ok...tide the secend screwe
Got the same torch, 🤷🏿♂️!!!
Hey champ.. i didnt understend...you change the pinion..? Wow much ?
Cool 😎
👍👍👍
Thanks
Wow keren
Thanks
good..
Thanks mate
👍🏿
Thanks
It’s 6 or 8s
Hey bro.. 6s
@@g.b-MTB-trail-jumps3062 thanks
Ayaan family vlog Malaysia
thanks mate
Nice 🙏
Thanks champ
jos
thanks mate
yes yes you got it out all too easy i got the screw stuck where you remove the motor and the fucking screw in the pinion i tryined cut it out of it whit dremel :DD
🤒
Sometime ther is" lock tide" ...so you must to warm this up.
And good screw.
Im use in mip screw.
Thanks for coment champ👑
@@g.b-MTB-trail-jumps3062 btw i need buy for it maybe new motor if i buy i take 1650kv but gonna be mext year stuff then... i did try cut the pinion off but idk where is the screw anymore i think i did cut it already off but cant take still the pinion out of it
ayaan family vlog Malaysia fyh
Thanka
Nice👍👍
Sub🙏🙏🙏
thanks dude
👍👍👍👍
Thanks