THANKS, couldn’t;t have done it without you. The first time I watch your video I got the courage to give it a try. Once I got started I played it again. I had to spend some time searching for the grub screw that flew off, but I got lucky and found it.
Oh to have a workshop....maybe someday, I'll get that built in this new garage. It is fun having a dedicated space for your hobbies. ❤️👍👏 Donovan & Jodi
Just got to looking and the esc is 160 amp which is the same as the max6 that I put in my truck so it should be a good pair just need a aluminum aftermarket motor mount and I'd be good to go? Lol
NICE. Yeah my grub screw wasn’t even tight. The e-clip was holding it on. INTERESTING FOR SURE. APPRECIATE YA Todd. I’ll be answer the giveaway comments at some point a little closer to Thursday. STAY UP BROTHA🤜🤛💯🙏✌️
Someone has since pointed out that there is a hole on the ARRMA side guard that gives you access to loosen the grub screw WITHOUT sliding the motor off. Just slide it over and loosen it through that hole. Save a lot of time. LIVE and LEARN.🤜🤛💯🙏🍻✌️
YUP. Someone pointed that out went I first put it up. APPRECIATE IT. That is for the smaller motor. Once you go BIGGER 780,800,1100kv you have to take the motor all the way off to change pinion. Plus the back battery tray and skirt.
My stock pinion was loose also, but on mine the set screw on the pinion was stripped. Also I had to cut a motor mount screw off because it was rounded so bad my hex driver wouldn’t get it out. Bad QC in this truck so far. My buddy had to cut both top motor mount screws off his. Nice video though 👍
I AGREE. That happened on my Losi. PAIN in the ass. The quality control hasn’t been TOP NOTCH, that’s for sure. THANKS for coming by bro. APPRECIATE IT🤜🤛💯🙏✌️
I had no clue what you were doin brother but it looked cool! I don’t know anything about RC cars or trucks! But I do know I enjoy the hell outta watchin you fool with em! 💯💯😎💯💯
That E-Clip has been a source of NIGHTMARES for me, but that's a great idea for keeping the Pinion Gear from FLYING AWAY!!! 😳😧😖 READY TO RIP now! Just posted my Rip last night. 😉 Carmine ✈🚂🚙
LOL. Yeah, DEFINITELY NEW for me. It had me scratching my head at first. LOL. I couldn’t find any vids on it either. Which I thought was weird. Yeah, my grub wasn’t even tight at all. That e-clip was holding it on. YES SIR. She PERFORMED QUITE WELL. I’ll check it out. Also, next vid. A update on the NEW BABYGIRL. Just saw her at 28 weeks.😍Pics at end of next vid. THANKS Carmine. GOOD LUCK on the Giveaway.🤜🤛💯🙏✌️
Absolutely a first for me, seeing a Clip there!! 😲 Thank God it was! LOOSE Grub Screw!!?? That's why I always use Blue Loctite on Grub Screws - whether it asks for it or not. If it ever becomes too tight - just hit the screw with a Lighter for a few seconds, and it softens right up!! 👍👍 SO EXCITED TO SEE THE LITTLE PRINCESS!!!!!👸 Hope Mama is doing well too. 😉
That floating spur gear- shaft- ballbearing setup is weird....everything moves bk n forth abt 1/8".....never seen so much movement in a RC.....and oh yeah my pinion gear had NO loctite on grub screw...came loose and was grinding against metal motor mount .....pft
Im talking about actual motor timing not punch setting. I know you can bring motor timing up to 15° but iwnas wondering if you have changed the timing any?
I’ve seen that as well. The biggest pinion I put on was a 40t. 40t and UP you will only be able to use 1 of the 2 motor mount screws. And 1 on the bottom as opposed to 2 up top and 1 underneath. I personally only use 1 and 1 with my 39/39 also. But if I do overdrive my spur I do it with the 800kv not the 1100.🙏🙏💯🍻
THANKS MAN. These are the Duratrax Six Pack X’s. I have the Duratrax Hatchet X’s for the Losi DB XL-E 2.0 and the Duratrax Lock UP X’s for the Xmaxx. LOVE ALL 3. They are belted. You can find them all over. I got mine at RC PLANET and My Tobbies. Bout $100. A little over. Also, they need a mod to fit. They fit the Xmaxx stock. So you will need to drill the hole bigger. Here’s a link of me doing it to the Losi. Same thing.🤜🤛💯🙏✌️th-cam.com/video/1HeZx8C6VHY/w-d-xo.html
DTXC5502 are the Duratrax Six Pack X’s. You will need to modify them by drilling the hole bigger. Here’s the link on what I do. th-cam.com/video/1HeZx8C6VHY/w-d-xo.html APPRECIATE YOU coming by BRO🙏💯🍻✌️
Nice quick work bro... Thanks for the shout out homie 🍻 also did u have to modify the six pack X tires to fit???
THANKS BRO. NO DOUBT. Yes. Here’s link to what I did. Same process as the Losi’s hatchets.
th-cam.com/video/1HeZx8C6VHY/w-d-xo.html
@@KruseNStuff appreciate it my brother 💯
@@Bro_wdf_you_doing Where you been at BRO? HOPE ALL is WELL?💯🍻
THANKS, couldn’t;t have done it without you. The first time I watch your video I got the courage to give it a try. Once I got started I played it again. I had to spend some time searching for the grub screw that flew off, but I got lucky and found it.
NICEEEEEEE. ALWAYS GLAD to HEAR THAT. APPRECIATE IT MAN🙏🙏🍻💯✌️
Nice bench work man 👍🏼👍🏼 looking forward to the run 💯
THANKS BROTHA. Yes sir.🤜🤛💯🙏✌️
Oh to have a workshop....maybe someday, I'll get that built in this new garage. It is fun having a dedicated space for your hobbies. ❤️👍👏 Donovan & Jodi
Thanks for the step by step tutorial! I'm about to change my pinion on my outcast 6s exb before ever running it.
Yes Sir. Nice. Enjoy🙏💯🍻
I like how they added that clip on the pinion. Makes me want to get that motor for my xmaxx just for that reason lol
Just got to looking and the esc is 160 amp which is the same as the max6 that I put in my truck so it should be a good pair just need a aluminum aftermarket motor mount and I'd be good to go? Lol
NICE. Yeah my grub screw wasn’t even tight. The e-clip was holding it on. INTERESTING FOR SURE. APPRECIATE YA Todd. I’ll be answer the giveaway comments at some point a little closer to Thursday. STAY UP BROTHA🤜🤛💯🙏✌️
I'll be watching and believe I entered on this one! Haha keep up the good work man
Nice KruseN nice.have great weekend
Bobaque Altered RC THANKS Bobaque. YOU TOO MY BROTHER🤜🤛💯🙏🍻✌️
Someone has since pointed out that there is a hole on the ARRMA side guard that gives you access to loosen the grub screw WITHOUT sliding the motor off. Just slide it over and loosen it through that hole. Save a lot of time. LIVE and LEARN.🤜🤛💯🙏🍻✌️
I just looked at my kraton because of your comment 💪🏽👍🏽👍🏽 thanks bruh
That hole on the plastic side skirt is for the grub screw so you don't have to remove the motor
YUP. Someone pointed that out went I first put it up. APPRECIATE IT. That is for the smaller motor. Once you go BIGGER 780,800,1100kv you have to take the motor all the way off to change pinion. Plus the back battery tray and skirt.
Expert installation. Have a great weekend!
THANKS GUYS. SAME to YOU TOO🤜🤛💯🙏✌️
awesome,cool pinion install
THANKS -Duke🤜🤛💯🙏✌️
Awesome video good stuff on the pinion great job thumbs up 👍
THANKS BIG BRO. APPRECIATE YA🤜🤛💯🙏✌️
Whoa I think I need to start the same hobby (lol). This is exactly what I wanted to learn about. Thanks man
NO DOUBT MAN. THANKS for stopping by🤜🤛💯🙏🍻✌️
I recently got the exb 8s and my grumb screw wasnt tighten at all as well. How I found out was when somthing knocked the e clip out while bashing.
Yeah pretty common. I actually use red loc-tite. BUT VERY LITTLE. The tiniest little Dab’ll do-ya😁💯🍻
Nice work on the pinion install. Thumbs up!
Nice update bro! cant wait to see it shredding the ground up. And flying high! Stay up bro🏎💨💯💪💪👊👊👍👍
THANKS BRO. Uploading a vid now. If not later, than tomorrow. And she was FLYING HIGH BRO.🤜🤛💯🙏✌️
It's amazing how you deal with all this!
My stock pinion was loose also, but on mine the set screw on the pinion was stripped. Also I had to cut a motor mount screw off because it was rounded so bad my hex driver wouldn’t get it out. Bad QC in this truck so far. My buddy had to cut both top motor mount screws off his. Nice video though 👍
I AGREE. That happened on my Losi. PAIN in the ass. The quality control hasn’t been TOP NOTCH, that’s for sure. THANKS for coming by bro. APPRECIATE IT🤜🤛💯🙏✌️
Just did this to my Kraton exactly like this with 0 complications. Thanks for the vid. This was a real quick and easy process.
NICE. YES SIR🙏🙏💯
Now it’s time for the 39t Spur😁🍻th-cam.com/video/2VekTrKbLus/w-d-xo.html
I had no clue what you were doin brother but it looked cool! I don’t know anything about RC cars or trucks! But I do know I enjoy the hell outta watchin you fool with em! 💯💯😎💯💯
LOL. THANKS BROTHA. I did do an extra step. Didn't need to take the motor off. LIVE and LEARN. APPRECIATE IT MAN.
Awesome video 🤜🏾🤛🏻💯💪🏾
Travel Vlog* THANKS. MUCH APPRECIATED🤜🤛💯🙏✌️
Looks ready to rip!! 😃👍🏻
YES SIR. Next vid. THANKS BROTHA🤜🤛💯🙏✌️
Hi friend very nice video good work excellent video Amazing
Great stuff fella. Can’t wait to see it in action 👍🏻👍🏻👍🏻
😎🙏🏜👍 good instructor
THANKS Lou🤜🤛💯🙏🍻✌️
🤜🏾🤛🏻💯💪🏾... good stuff fam
THANKS Coach🤜🤛💯🙏✌️
That E-Clip has been a source of NIGHTMARES for me, but that's a great idea for keeping the Pinion Gear from FLYING AWAY!!! 😳😧😖
READY TO RIP now! Just posted my Rip last night. 😉
Carmine ✈🚂🚙
LOL. Yeah, DEFINITELY NEW for me. It had me scratching my head at first. LOL. I couldn’t find any vids on it either. Which I thought was weird. Yeah, my grub wasn’t even tight at all. That e-clip was holding it on. YES SIR. She PERFORMED QUITE WELL. I’ll check it out. Also, next vid. A update on the NEW BABYGIRL. Just saw her at 28 weeks.😍Pics at end of next vid. THANKS Carmine. GOOD LUCK on the Giveaway.🤜🤛💯🙏✌️
Absolutely a first for me, seeing a Clip there!! 😲 Thank God it was! LOOSE Grub Screw!!?? That's why I always use Blue Loctite on Grub Screws - whether it asks for it or not. If it ever becomes too tight - just hit the screw with a Lighter for a few seconds, and it softens right up!! 👍👍
SO EXCITED TO SEE THE LITTLE PRINCESS!!!!!👸 Hope Mama is doing well too. 😉
Pretty easy to install a pinion that a convenient design 🔥💯🔥
Yes sirr!!
Nice video, i Just pickup a kraton 8s, any heat issue with a 23T pinion instaled with stock electronic?
Thanks. Nice. No heat issues. I just put a 26t in. Be testing that soon
@@KruseNStuff great.. thanks for replying sir 🙏🏻
NO DOUBT🙏💯🍻✌️
Amazing Video 🙂😊
My grub screw was same way not tightened from factory only held on by e clip
Yea. I ended up doing away with the e clip and use just a touch of red loc-tite. Not too much tho. You still want to get it off later, if wanted.🙏💯🍻
good content 👍
Appreciate it🙏🙏💯🍻
That floating spur gear- shaft- ballbearing setup is weird....everything moves bk n forth abt 1/8".....never seen so much movement in a RC.....and oh yeah my pinion gear had NO loctite on grub screw...came loose and was grinding against metal motor mount .....pft
Have your e clip ever popped out or set screw in motor pinion ?
E clip, no. Set screw, yes.💯🍻
Do you think the motor has the power sine it’s so heavy? Cause I wanna get one but not sure
I think the motor has PLENTY of POWER. I can double backflip with ease and triple backflip. APPRECIATE YOU coming through🙏💯🍻✌️
Have you messed with motor timing yet for more speed?
Yeah, it’s on punch 5
Im talking about actual motor timing not punch setting. I know you can bring motor timing up to 15° but iwnas wondering if you have changed the timing any?
Ive seen another video that guy puts on a 42T pinion....whats your take??
I’ve seen that as well. The biggest pinion I put on was a 40t. 40t and UP you will only be able to use 1 of the 2 motor mount screws. And 1 on the bottom as opposed to 2 up top and 1 underneath. I personally only use 1 and 1 with my 39/39 also. But if I do overdrive my spur I do it with the 800kv not the 1100.🙏🙏💯🍻
Great video . Where can I find those wheels and tires ? Looks great!!
THANKS MAN. These are the Duratrax Six Pack X’s. I have the Duratrax Hatchet X’s for the Losi DB XL-E 2.0 and the Duratrax Lock UP X’s for the Xmaxx. LOVE ALL 3. They are belted. You can find them all over. I got mine at RC PLANET and My Tobbies. Bout $100. A little over. Also, they need a mod to fit. They fit the Xmaxx stock. So you will need to drill the hole bigger. Here’s a link of me doing it to the Losi. Same thing.🤜🤛💯🙏✌️th-cam.com/video/1HeZx8C6VHY/w-d-xo.html
KruseN Stuff awesome thanks for the info . I appreciate it!
NEVER a PROBLEM.💯🍻✌️
Bro u got to get some hex drivers man.
LOL. Yeah, Ive gotten that a few times. I gave some protek hex drivers now. Much better. APPRECIATE IT Kal.🙏💯🍻✌️
@@KruseNStuff all good. Man u made me cry seeing that 🤣.
Hey buddy whats the part number for those rim and tires
DTXC5502 are the Duratrax Six Pack X’s. You will need to modify them by drilling the hole bigger. Here’s the link on what I do.
th-cam.com/video/1HeZx8C6VHY/w-d-xo.html
APPRECIATE YOU coming by BRO🙏💯🍻✌️
What size e clip was that on the small tooth
This is just the stock e-clip on the outcast 8s. I believe it’s the 3.2mm💯🍻
So, where are you hiding the turbo on that beast? 😉
🤜🤛💯🙏🍻✌️
How's everything going bro
Going GOOD BRO. HOPE ALL is WELL with you.🤜🤛💯🙏✌️
Like 👍🏽
Lol man that was long work theres a hole in the side of the truck to losen pinion. Dont have to take all that off
LOL. THANKS for the info BRO. DEFINITELY GOOD to know. LIVE and LEARN.
Just looked. GOOD ISH BRO. GOOD ISH.
Like 25, videos full watched, I'm here always to support you. Stay connected to us..pls support each other.
first
PRO GAMER YT THANKS MAN🤜🤛💯🙏✌️
Subscribed 🫡
Appreciate it💯🍻
:-)