How to Soldering SMD Component's Full Details in Hindi (

Hello Engineers,
I'm Prosanta Biswas From Kolkata, West Bengal, India, and i'm an Electronics Hardware Design Engineer.
if you have any query feel free to contact me:
Email: [e-mail]
WhatsApp: [phone]
Learn How to Solder SMD in this Detailed Surface Mount Soldering Guide.
SMD Soldering and Desoldering is little different from thru-hole Soldering and Desoldering Process.
SMD Desoldering is generally done using a Hot Air Blower while Soldering can be done using a soldering iron and solder wire or using solder paste or solder balls (BGA) and SMD Hot Air Blower / rework station.
How to Soldering SMD Component's Full Details in Hindi Part-2 (#007)
• Video
There are many process for surface mount soldering for SMD Components but none is perfect for all applications.
Types of SMD Soldering Process
All SMD soldering processes have technical concerns and there are ways to resolve those concerns. Because it offers higher yield and lower operation cost, convection dominant IR soldering has evolved as the preferred process for reflow soldering.
Vapor phase soldering will not disappear but will continue to be used in niche applications. For some specialized jobs, other reflow soldering processes such as laser and hot bar resistance soldering are also used.
These soldering processes are intended not to replace either vapor phase or IR but to complement them. The process ultimately used should be selected on the basis of the specific requirements of the intended application, the solder defect results, and the overall cost.

[@ChadLuciano]

I don't speak one word of Hindi and understood everything in this video...all the way to the orientation and indicators for positioning components...this video is stellar...the drag soldering technique was executed nicely...watching this video will help you to improve technique and expertise...much thanks!!
मैं हिंदी का एक शब्द भी नहीं बोलता हूं और इस वीडियो में सब कुछ समझता हूं... घटकों की स्थिति के लिए अभिविन्यास और संकेतक तक सभी तरह से... यह वीडियो तारकीय है... ड्रैग सोल्डरिंग तकनीक को अच्छी तरह से क्रियान्वित किया गया... देख रहा हूं यह वीडियो आपको तकनीक और विशेषज्ञता को बेहतर बनाने में मदद करेगा...बहुत धन्यवाद!!
main hindee ka ek shabd bhee nahin bolata hoon aur is veediyo mein sab kuchh samajhata hoon... ghatakon kee sthiti ke lie abhivinyaas aur sanketak tak sabhee tarah se... yah veediyo taarakeey hai... draig soldaring takaneek ko achchhee tarah se kriyaanvit kiya gaya... dekh raha hoon yah veediyo aapako takaneek aur visheshagyata ko behatar banaane mein madad karega...bahut dhanyavaad!!

[@Electrobias]

@ChadLuciano
thank you for your valuable comments and support👍

[@ibazur]

thanks for putting 'full details in Hindi' to be not misleading, respect

[@souravbhattacharyya3392]

Detailed unskipped explanation 👌khub valo laglo

[@Electrobias]

Thank you for your support😊

[@bullygram]

Beautifully, I admire your craftsmanship, mean the killer soldering skills you got!!!

[@Electrobias]

I am inspired by your valuable comments,
Thank you for your support😊

[@D.k.Singer]

*Excellent uploading with practically 👍👍*

[@Electrobias]

Thank you for your support😊

[@pravinpadale8787]

Very useful. I never thpught Ic’s could have been soldered manually with such easy technique. Thanks you for the video.

[@Electrobias]

thank you for your valuable comment.

[@apnaagritech786]

Wow, good and easy way to soldering SMD component. I fully support your art and work. 🎁💯🎁💯🎁💯🎁💯🎁💯

[@Electrobias]

I am inspired by your comments.
Thank you for your support😊

[@AmitJayant]

Great explanation, superb camera focus and quality. Perfect video 👌🏻

[@MasterJENNY.]

bahut gyan vardhak video bnaya dost, thank you dost ♥️♥️

[@Electrobias]

Thank you for your support😊

[@hydarrashidi5704]

Hello from Iran, thank you very much for your useful and valuable educational videos.💯👍

[@Electrobias]

@hydarrashidi5704
thank you for your valuable comments and support👍

[@luizclaudiomoraes5910]

Parabéns!!!! Um Trabalho perfeito!! Obrigado por Passar esse conhecimento. Saúde e Paz.

[@Electrobias]

Thank you for your support😊

[@mingosutu]

Thanks a lot. I don't understand Hindi or Urdu, I have learned something or most of the video. Thanks again.

[@guliyevshahriyar]

Thank you very much, learnt a lot of knowledge in just a few mins, will buy that flux too, great skills.
Keep up the good work.

[@Electrobias]

Thanks Şəhriyar Cəfər Qulu for the positive feedback! I'm glad you found the video helpful and learned a lot in just a few minutes. I appreciate your support and encouragement. Keep watching for more great content!

[@Offline__pradeep]

What a perfection sir jee 🙏🙏🙏🙏🔥🔥🔥🔥🔥🔥

[@chinnarao326]

Resp Sir! Nice Vedo. Dhanyavaadh Sir. -- ChinnaRao Paderu Visakhapatnam Dist Andhrapradesh

[@davidemanuel1300]

More video Sir marvellous and a big salute to You with love ❤️

[@soumalya9694]

Outstanding video sir, pranaam, namaskar, thank you sooo very much 🙏🙏🙏❤️❤️❤️💐💐💐

[@Electrobias]

Thank you so much👍

[@ElectroCreativity]

व्हिडिओ और व्हिडिओ कि क्वालिटी बहोत हि अच्छी थी |
धन्यवाद

[@Electrobias]

आपकी अमूल्य टिप्पणियों के लिए आपका हार्दिक धन्यवाद.
Thank you for watching😊

[@1967Tariq]

Beautiful professional job done

[@Electrobias]

Thank you for your support😊

[@benjaminlolik4743]

Too cool and fantastic wielding.

[@Electrobias]

Thank you for your support😊

[@user-mk2ip2ms1s]

Hello, sir good evening kaise ho aap mai aasa karta hoon aap acha honge mai apki vedeos dekhta hoon sir kaphi intresting Inspiaring and motivation hoti hai sir aap har ak choti si choti chiz ko bari ki se samjhate haein sir meri aapse yehi request hai sir ki aap isi tarha vedeos dekhne walon ko samjhate rahein sir thank you, love you sir subh ratri

[@MarcioFariasOficial]

Congratulations, I also have a channel here in Brazil and I really like your videos

[@ArashReceiver-nz5pn]

This is what I wanted to learn

[@anandajayathissa8642]

Very clear lesson thank you imfallow your video

[@user-lk9lv2vd5h]

This your Two tips is the pro ❤

[@hayatmalik7077]

smd soldering per sab say behtreen video

[@Electrobias]

Thank you for your support😊

[@TheRuelrubic]

nice content million of thumbs up bro.

[@Electrobias]

Thank you for your support😊

[@masyudiofficial1718]

Very detail you give the information

[@Bianchi77]

Nice video, thank you :)

[@SHULIN-rf6tr]

Very specifically ,sir.thank you

[@arupsarkar2003]

সত্যি দাদা ভালো লাগলো। খুব সুন্দর বোঝানোর ক্ষমতা তোমার।,❤️

[@Electrobias]

Pase theko eei rokom rro oonek video aasbe eei Chanel e.
Thank you for your support😊

[@arupsarkar2003]

@@Electrobias ❤️❤️❤️

[@journeyoflife58]

প্রশান্ত বিশ্বাস ভাইয়া প্রথমে লিড লাগানোর পর জেল জাতীয় কিছু লাগালেন এর নাম কি?? আপনার ফেসবুক লিংক দেয়া যাবে

[@ilyasbel176]

Good job
Thank you very much

[@ihsanshani2259]

Wow️ it's amazing bro im learning

[@Electrobias]

Thank you for watching and support😊

[@balarampyla7787]

Thank you for very useful information sir.....

[@Electrobias]

Thank you for your support😊

[@dushi1903]

I don’t speak Hindi, but this was quite educational.

[@worldinstrumentationengineer]

YOU ARE EXPERT IN WORK

[@Electrobias]

Thank you for your support😊

[@suppcomputing7805]

Thank you very much sir for your valuable time for us..... nicely explained and done....🙏🙏🙏🙏

[@Electrobias]

Thank you for your support❤

[@frct468]

Parabéns pelo vídeo. Saudações do Brasil!!!

[@ronaldoguemo8445]

nice sir you have a very good soldering tecniques

[@Electrobias]

Thank you for your support❤

[@RaviPrakash.Official]

Very well done!

[@Electrobias]

Thank you for your support😊

[@andikarahmanhakim3235]

well sir thank you for this video to help me a lot 😁

[@RiseWithSatyam]

Very helpful video thankyou so much sir

[@Electrobias]

Thank you🙏

[@Rams_hobby]

Very useful video Thanks 🙏

[@Electrobias]

Welcome, thank you for your support👍

[@martinromeo1006]

Nice work 👏 my friend 👍 well done

[@Electrobias]

Thank you for your support😊

[@Angel-5604]

Bahut mast jankari di he

[@markokonigschulte7551]

Perfection! What kind of solder do you use and whats the temperature of the iron set to?

[@MemesRandomXD1]

nice job. congrats. its the best video.

[@Electrobias]

Thank you so much👍

[@geovanerodrigues4160]

Que maravilha !! Que habilidade e perfeição !! Ficou tudo perfeito, Show !!!

[@Electrobias]

Thank you for your support😊

[@AshokKumar-vh1pw]

Excellent video. 👍

[@Electrobias]

Thank you for your support😊

[@amarmail8033]

Very good man.

[@chotuusian4127]

Good work👍

[@masjes86]

Thanks mr.
Tutorial very good

[@Electrobias]

Thank you for your support😊

[@yashmandyal1479]

Very good & very nice sir

[@kamalrauthan3192]

Very Good work Nice

[@ashokkumarsingh8315]

Good information 🌹👍

[@Vidya1939]

Nice video / technique TKQ

[@Rich.vibe.aus.]

New generation must learn.this is where india lacks

[@Electrobias]

Thank you for your support😊

[@fellpower]

I cant speak hindi, but it was clear to see. Thx for that quality. But u need abetter tip for your soldering iron, something smaller or like a knife. its muuuuch better to solder with it

[@unknownforever4900]

Excellent video tutorial. Greetings from Lima Peru.

[@Electrobias]

Thank you🙏

[@unknownforever4900]

​@@ElectrobiasMy friend, Do you know how to clean or completely remove the tin from the tracks of a component?

[@p.k.953]

The thing is, those solderpads are huge so it looks easy in the video! But in real life scenarios.. they are more compact and you have to use a rework station...!!! I'm a mobile repairing technician as well as audio products manufacturing technician!

[@Electrobias]

Yes,
Thank you for watching😊

[@darkozivkovic8727]

👍👏👏

[@deepurangarajan8696]

Ya it's a good training. But whe you showed the different type of components, simultaneously you should show the backside/bottom side of the component also. Or atleast during the soldering time you should show the other side of the component and how it should be placed on the board

[@Electrobias]

WhatsApp me [phone] I will explain that.
Thank you for watching ❤

[@bhuvanpatle4523]

It looks too easy to do
But when you where actually do it then you know how much practice accuracy and stable hands it takes to complete a single component neatly
😀💭

[@sriyantra1939]

Take a damaged board, remove components and try resolder them in their own place for a practice.

[@stefaniavargas7030]

@@sriyantra1939 Excelente estrategia, gracias por la idea

[@Electrobias]

Practice soldering and after some time you will be able to solder very well,
Thank you for watching😊

[@williamhansda6778]

Right

[@cleitonakaspyda]

amazing!!! even tho we can understand generally it would be awesome to have some subs, great work!

[@Electrobias]

Yeah thanks

[@ErCanEverything]

Good video, well done my Friend👏🙂🤝🤝🤝

[@Electrobias]

Thank you for your support😊

[@surendrakverma555]

Good. Thanks 👍

[@chamilathuduwage7646]

Thank you... Good Luck.

[@Electrobias]

Thank you for your support😊

[@nirdeshpaudyal9215]

Flux works like magic ❤❤❤

[@saleemkhan-mx9jw]

Thanks for knowledge sharing.

[@Electrobias]

Thank you for your support😊

[@franciscosoarescaetano6669]

Vc nós deu uma bela aula de como soldar componentes eletrônicos em uma placa,me sinto muito grato pelo aprendizado do qual obtiver pelo seus conhecimento.

[@Electrobias]

Thank you for watching

[@VitorFThome]

​@@Electrobias Thank you as well man, I'm also brazilian here hehehe. Can you share a link for a good solder and flux so I can buy ? Like which model do you think is best?? Lead free?? Normal solder? And about flux?

[@dsouza1271]

Não entendo a sua fala, mas você fazendo fica fácil de entender. Obrigado pelo envio do seu vídeo.

[@Electrobias]

Thank you for your support😊

[@partusrusuta2022]

Good job mister.....

[@Electrobias]

Thank you for your support😊

[@MusicCityOdia]

Great work

[@Electrobias]

Thank you for your support😊

[@qadeerhussain1274]

Very nice explaination ۔۔۔

[@Electrobias]

Thanks for supporting👍

[@caution1088]

Tomar kajer nipunota dekhe valo laglo.

[@Electrobias]

Thank you for your support😊

[@Hossam.Al-Gohary]

excellant work

[@Electrobias]

Thank you for watching ❤

[@bmcgorakhpur5787]

V nicely soldered 👍

[@Electrobias]

Thank you🙏

[@electronicsbough3344]

Achha lage... ❤️

[@Electrobias]

Thank you for watching sir😊❤

[@YoYofan0001]

Nice video sir..,,👍🏻

[@Electrobias]

Thank you for your support😊

[@myroad5469]

Thank you very much for thé vidéo

[@Electrobias]

Thank you for watching ❤

[@pukesey4604]

thanks admin love you

[@Electrobias]

Thank you for your support😊

[@kailashmakwana6829]

Mast bro thanks for video nice 👌

[@Electrobias]

Thank you for your support😊

[@6nogate]

Very Useful

[@Electrobias]

thank you

[@waheedshah-pu7rj]

Good job

[@balarampyla7787]

I waiting for your next video sir....

[@Electrobias]

Next video is coming soon...

[@climaxvideozone5480]

Love u Great Lesson 🎉

[@Electrobias]

Keep watching

[@hikmatplaystation807]

Great video sir

[@Electrobias]

Thank you for your support😊

[@manojbt8160]

Sir really super, please make a video on desoldering of smd components 🙏

[@Electrobias]

I'll make a video on this topic,
Thank you for your support😊

[@jagdeomali9194]

Very good class

[@Electrobias]

Thank you for your support...

[@kajalsarkar4403]

Nice work

[@Electrobias]

Thank you for your support😊

[@sureshsukumaran7474]

Ya you are professional...

[@Electrobias]

Thank you for watching ❤

[@mybasics7194]

Good analysis

[@Electrobias]

Thank you for watching ❤

[@Domashniy_master_Ananiev]

Приветствую! Поздравляю с успешной пайкой! 🎉

[@bikemechanicmax667]

Video jara short banao , jankari achchi de rahe ho par logo ko short videos achhe lagte hai 5 minutes ke aas pass par puri jankari ke sat 🥰🥰 love you

[@Electrobias]

Thank you for the suggestion, I'll try this.
Thank you for your support😊

[@bikemechanicmax667]

@@Electrobias wellcome 🥰

[@quenchtv5436]

He make it look easy i spent 2-3 hours to sold a small piece im wondering what brand is he using for solder wire cos mine dont really stick i believe this is expensive one for sure im also wondering if you burned those white lines does it affect the performance of the computer??? Also what kind of liquid to use to remove the flux?

[@juvenaledison3099]

Verdadeiro profissional parabéns

[@Electrobias]

Thank you for watching😊

[@geovanerodrigues4160]

Esse sim !!

[@MR.KING.555]

Thank you bro 😊😊😊

[@rameshchandradas8687]

Very amazing

[@Electrobias]

thank you ramesh for your valuable feedback and support

[@entropy_of_principles]

....with powerful hundi accent.

[@julioguitars]

Todo mundo es "experto" soldando ya con soldermask y placas profesionales, te quiero ver en una homemade a ver si te queda tan bonitas

[@Somanathan-hj7ge]

Dear brother, you are also still learning to solder, you watch how Americans professional people are soldering, after soldering it should shine , before soldering apply flux on board, use less flux,and solder, more solder will increase total resistance in circuit, good luck