How To Solder SMD Correctly - Part 1 /SMD Soldering Tutorial
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2024
- How to solder SMD components is nicely shown in my latest Soldering Tutorial .Beginners and more advanced solderers can learn a few new tricks from the world of smd soldering with this clear guide with all stages fully explained.
From 1206 , 0805 + 0402 resistors and capacitors through to a 100 pin QFP IC with plenty Inbetween you will find some great hints and tips on how to fit your components properly using different tips and materials along the way.
There is clear photographs throughout showing end photographs of every device.
If you found this smd soldering video to be of use please consider browsing my other soldering videos for more great information and tips from the world of soldering
Finally good luck with your projects and so as to not miss out on future releases please like and subscribe and thank you again for your time.
Please check out my many other soldering videos on this channel , maybe they can help you out with some of your soldering questions.
For a more in depth version of this video please see Part 4 of this series , all the best 👍
#smdsolderingtutorial #howtosoldersmd - วิทยาศาสตร์และเทคโนโลยี
I am an electrical engineer and at the university they see this as something unimportant and even trivial that they do not bother to teach it. I learned to weld by myself some time later, and now with you I am finished learning tricks that I did not know. Awesome channel, master and thanks for sharing. Greetings from Mexico ✌🏼🇲🇽
Hi , thank you for supporting my channel , very much appreciated . I'm really pleased I have been able to help you , that's great to hear . You are right what you say that no one seems to teach anyone anymore like they did years ago , it's the throwaway times of today I guess . I will always post more videos when I get some spare time , thanks again and good luck with all of your soldering projects in the future, goodbye👍
The university can`t tech you everything. Self learning is part of engineering.
I know this is a 2 year old video but I still had to tell you what a great job you do
Hi , thank you for your comment, much appreciated. Shortly after i posted this one I got a better camera etc so all of my last 25 or so videos are of a much better quality . I'm glad you still enjoyed this one though . Thanks again , take care 👍
A million people helped on this video alone congrats man! Legends like you are the reason we're able to get into this stuff in the first place and do a proper job. :)
Hi , thank you for your kind words and your support of my channel , very much appreciated . My videos are actually a lot clearer these days ( picture and sound ) but I'm always pleased when people comment on this one as it was made a couple of years ago now . I will always post more when I get some spare time as I just want to help a few people if I can with their soldering issues . Thanks again , take care 👍
step 1: be a surgeon
Thank you so much for the educational video. I'm 53 and been teaching myself electronics since I was 12 ish. I have an electronics lab in my apartment and plan on enrolling in school in December for electronics. Actually found a school that still teaches electronics!!!😊😊😊😊
Hi , thank you for your comment , very much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues , if it can then that's great . Thanks again , take care 👍
Mr Solder, sir, you're skills are insane. I've never seen anyone solder individual pins on a quad pack like that. I'll give it a shot but I tend to shake a good deal so I may be doomed to a life of drag soldering. Thank you for your time and sharing such phenomenal skill and tactics.
Hi , thank you for your support . I'm glad you enjoyed the video , hopefully I can help a few people and maybe give them some different soldering options . I just find it easier to do pin by pin than drag soldering which I've never liked . Practice and we can all get better , that's what I tell myself anyway . My future videos will be much sharper clarity as I've just worked out how to edit my own videos instead of getting them done on an external device . I've just reposted 3 of my videos which I have updated to the sharper clarity . Thanks again and good luck with any soldering projects you do 🤞👍
this is an amazing tutorial. I gave up with soldering SMDs back then because they were hard for me. but watching your tutorial encouraged me to give it a try again.
Hi . Thank you for your comment , much appreciated. I'm glad you enjoyed the video. The main thing I've learnt and tell people is to get a various selection of soldering tips and a decent iron , i.e Weller or Metcal. The trouble with cheap irons is you generally get one large ended tip that you can't do fine stuff with . With the right tools and practice you can definitely get to a better level that's why I do my video's to hopefully help people along the way . My next video will be showing helpful hints like using different widths of solder ( again very important ) , different tips and what you can do with them as well as lots of other hints and tips. I will keep posting videos to aid people while they find them useful . Thank you again for your time and good luck with your projects 👍
How about now?
Hi, I just finished assembling my first SMD board: relatively big components, 1206s, SOT-223, 4 mm radial capacitors, and a micro USB socket (a real pain, this one). I could only do it because of your videos, thank you! They're super clear and helpful, keep them coming! :)
Hi . Thank you for your comment, much appreciated. I'm glad you find the videos useful , that's why I make them to hopefully help people. I've got more planned for the future , I'm just a bit busy at the moment , but as soon as I get some time I will get more posted . I try to think of what people may need to see so I hope I sometimes get it right . Thank you again for your support 👍
@@mrsolderfix3996 Looking forward to it, really amazing content!
Hi . Thank you , it's comments from people like you that inspire me to do more videos . Good luck with all your future projects and hopefully I can show you a few more things that may help you in the future 👍
Why is everyone still using microusb? It looks to me you can make a PCB which is also a USB c socket
@@mrsolderfix3996 Fantastic videos mate! esp the tough QFN stuff. do you have an equipment list or video somewhere?? thx again for the great posts.
Excellent training video , helping people repair rather than throwing stuff away.
Hi , Thank you . I just want to help people in any way I can and hopefully they can rework their projects successfully . Thank you for watching , much appreciated 👍
Very clear, outstanding camera angles. Thanks!!!
Hi , thank you . I'm glad you enjoyed the video and hopefully found it useful. I try and get different angles than the normal direct from above ones as personally I think you can see what is going on more clearly . I'll be posting more videos sometime soon , thanks again for your support 👍
Thank YOU. Yor company
Hi . Thank you for your comment, much appreciated 👍
@@mrsolderfix3996 thank YOU verey much
@Mr SolderFix Great stuff! Do you have to clean the Flux off after you solder? Really appreciate it!
Many Thanks for showing us how to properly solder using the right procedure with the different appropriate items required. You are a Gentleman and Scholar🔥👍 Cheers.
Hi .Thank you for your comment , much appreciated. Glad you found the video useful and hopefully I can help a few people 👍
That was amazing, I can "get by" but you, sir, are a genius and after seeing that I know I can improve my technique drastically.
Hi . Thank you . All I want to do is hopefully help people like yourself a little and then I'm happy . It makes the videos worthwhile. Thanks again , much appreciated 👍
This is of course very good, even though I'd add something. A quick mention on ESD protection soldering irons would be worth noting, as would preheating the PCB (even just a heat gun) so as to prevent blow out of the masking or copper. That, however is more likely to affect somebody in a particularly cold climate. Even though room temperature is assumed, life doesn't always work that way. Good video. Nice shiny feet on the soldering.
Very helpful, I want to get into SMD soldering so this was a HUGE helper!
Hi . Thank you , much appreciated . I just want to show people how to fit the most common packages really , that's why I've done this guide . I've also done a part 2 along similar lines and will be doing a few more parts in the coming weeks in this series of videos . Glad you found it useful , thanks again , good luck👍
This was really helpful. I've been excited to get into smd soldering and this was exactly what I was looking for. Your thorough explainations were clear and concise. I always love learning from a person with experience and who stops to explain the problems one may encounter. Thank you for this, it's really appreciated.
Hi , thank you for your comment , much appreciated . I've done lots of different soldering videos on my channel covering many different aspects with hopefully the quality of my videos vastly improving along the way . Maybe some of my other videos will be of use to you . Thank you again , take care 👍
Quem diria, pesquisando sobre smd's e me deparo com uma bandeira do Brasil! Parabéns pelos vídeos, muito bom.
Hello. I really liked your work done. Everything is very clear and efficiently done for training in this area. I have a request for you, please specify what fabric you use to remove the flux? And better the full list of all materials, for convenience. Sincerely, Vlad.
You are an artist with that soldering iron! It's a pleasure to watch such a good soldering technique.
Hi . Thank you for your nice comment .
I just want to show people what can be done with soldering , and hopefully they can practice and get really good . I will keep posting more in the near future . Thanks again 👍
Agreed.
Hi . Thank you , much appreciated. I will be posting more videos in the near future , I've just been busy lately . As long as people still want to watch them I will keep posting . Thanks again for your support 👍
I am glad that I found your channel. Watching you gives me confidence to do surface mount soldering. People that I have talked to had me terrified to do this. But after watching you. I think that I will have a go. Thank you.
Hi , thank you for your support of my channel , very much appreciated. With soldering the more you practice the better you get as you will learn what sort of tips and what size solders you need . Also use flux ( vital when soldering ) , I've tried to cover lots of soldering subjects during my videos and I will keep posting more when I get some spare time ( which isn't that often ) . Good luck , take care 👍
I can totally relate. Been avoiding an SMD board for months, before gathering up the courage out of necessity. The 100 pin quad IC wasn't as bad as expected. Thought I was home free, until attempting the 0603's, which behaved like jumping beans. Haven't even attempted the 0402's.
Made a mess of the project. So now I've started redesigning (1st ever) the commercial PCB with 1206 SMDs in KiCad by following their tutorials. That was already part of the plan. But, now, it's sooner instead of later, after the prototype with the commercial board.
Mr SolderFix has amazingly steady hands and excellent soldering technique, which makes it look so easy and simple. I've learned to purchase at least twice as many components as I need, just to allow for failures. Just put in my order and found significant price breaks in quantities of 100, which also minimizes repeated shipping costs.
Good luck on your project.
😎
The best gift any person can give is the gift of teaching the meaningful. Thank you Mr. SolderFix. I will apply what I learned today to fix a Macbook Pro motherboard.
Hi , thank you for your comment, much appreciated. If I can help anyone then that's great , that's all I want to do . Obviously all the people who leave negative comments to my videos have a choice but obviously know everything there is to know about soldering , just wish they would start a soldering channel up as they know everything already.
I'm glad you are one of the nice people out there , thanks again , take care 👍
You teach very well and you explain the detail of what you are doing and trying to achieve instead of saying do this and that without an explanation of why so people can understand the methods and why the specific technique. Thanks for the great content you create. I'm learning alot here
Hi , thank you for your comment , much appreciated. I'm glad you enjoy the videos and find them useful , if I can help anyone then its a bonus. Thanks again and good luck with your soldering projects 👍
Very helpful, thanks for taking the time to make this and for sharing your knowledge.
Hi . Thanks for the comment. I'm glad you enjoyed the video , all I want to do is try and give people more soldering options then they can choose the one they like and hopefully get really good . Your support is much appreciated , thank you 👍
Lovely job. Have to say, i'm most impressed with your steady hand placing the components before soldering!
Hi , thank you for watching the video and commenting , your words are very much appreciated 👍
Thank you brother very clear voice supper clear videos and covering every angle keep up good work humanity need people like you
Hi , thank you , glad you enjoyed the video . Hopefully you found it useful and gained something from it . Thanks again for your time , much appreciated 👍
A prática leva à perfeição, meus parabéns. Você solda muito bem, e ensina com clareza. Obrigado pelas dicas.
Hi , thank you for watching the video and for your comment, much appreciated 👍
Fantastic visual reference, just what i needed to help me practice my SMD joints before i tackle my dead keyboard LED's. :D
Hi , thank you for your comment , much appreciated. I hope you get on ok with your soldering projects and thanks again for watching 👍
"Little bit of flux".... (drowns the PCB in flux) ;-)
Always fascinating to see a skilled person at work. Thanks, I'll be trying to copy you.
Hi , thank you for your support , much appreciated. I've posted a similar video about 3 weeks ago going more in depth than this video and clearer as well , but along the same lines . Hopefully people can find this video as I think it's far more useful than this one . Fingers 🤞 it gets views . Thanks again , good luck with all your soldering projects 👍
The video I've been waiting on, cheers mate!!!
Hi . Thank you for watching my video's , much appreciated .
Your comment last time made me realize I needed a basic component video so here it is. Part 2 will be coming in next few weeks. Thanks again 👍
Amazing to see and so clean! I'm definitely getting a microscope, currently using flexible dental desk clamp magnifying lens.
Hi . Thank you for your comment, much appreciated. I do use a microscope sometimes when I'm doing fine pitch work , but all the filming is done using a mobile phone with a macro lens attachment placed over the camera of the phone . You can buy special kits that include the bracket that sits over your phone camera and then the lens just screws into the bracket . This allows me to sit it next to the work bring carried out and so I can get different angles when filming . Thank you again for your support and good luck with whatever you do 👍
@@mrsolderfix3996 Can you please share the link where one would get the micro lens that attaches to the phone
Thank god i found you man i have been lookinh for such video for long time, introduction to components and also how to solder each which is amazingly clear in the video thank you i am new to this 2 months i have been reading about it and just bought my tools and couple of dead old motherboards excited to start practicing now thanks to you i can
Hi . Thanks for your comment , much appreciated. Hopefully I can help you , that's why I do the videos . Good luck with your projects and thanks again for your support 👍
@@mrsolderfix3996 i am new to this can you please do a soldering technique without a microscope because i can't afford it at the moment it will be highly appreciated and also i could find a single video on how to probe various components using multimeter if you fo a video about it on a laptop motherboard it will help thousands of new guys to repairs like me, thank you again🙏
I couldn't find*
Excellent tutorial man! Can't wait to pick up a soldering iron myself! Keep it up!
Hi . Thank you . With practice you will get better and better , that's what I found myself over the years . Soldering can be fun and it does give you satisfaction if you manage to fix problems . I'm sure you'll love it . Good luck with all your projects and thanks for your support 👍
Hi,
Suggestion
When showing surface mounting device, please always show a rule side of them so we can have a fast representation of their dimension.
Thanks for sharing!
Thanks for the video, u gave me the encouragement to retry soldering surface mount Ic's 73's
Hi . Thank you . I hope you get on really well and any help I can give you I will . Best of luck with your projects 👍
I am really impressed with your soldering skills.
Hi . Thank you . I just want to help people by showing them my methods . Lots of people solder in different ways so the more of us who can show these ways the more options people can choose from . Thank you for watching , much appreciated 👍
Britain English is amazing to listen to. I watched the all video so that I just listen and enjoy the language. #Zambia
Hi , thank you for watching the video's , much appreciated. I'm glad you enjoy listening to them as well , I will put more on TH-cam SOON 👍
Lovely clear tutorial. Thanks for showing. Can you tell me what the material is that you are using to clean after soldering please?
Hi , thank you for watching . The solution that I use to clean my boards after soldering is called Ultrasolve . It's the best flux remover I've ever used ( and I've used many over the years ) and it's actually the recommended cleaning product for the flux I use , SMFL200D . Both these products are available from Farnell , RS Components , Rapid Online and other Electronic distributers.
The cleaning cloths are from a company called Grove Sales and are also the best I've ever found . Come in a pack of 100 , they are amazing , about £5 a pack. Hope that helps , thanks again 👍
Are you using a sponge with it or…? And what kind of flux tool is that?
Hi , I presume you mean what I clean the iron tip with ? If so I am using a damp sponge for this. The flux applying tool I use is simply a plastic cable tie , ive posted a video on TH-cam showing the flux I use , how i use it etc . Thank you for your comment , good luck 👍
These SMD videos have been excellent! I have a project I'm planning with some 0805 and LQFP 32/48, so these have been a huge help!
Question: Are you using a magnifying lamp/microscope? Or is this with the naked eye? The camera view makes it seem like there is acres of room between the traces, but that's not true :) Thanks! Keep up the great work - I've subscribed!
Hi . Thank you , much appreciated .
I'm glad you found the videos useful , I have more SMD ones planned so hopefully you will find them useful as well.
To do most of my work I do use a microscope and your right in saying the traces may appear a distance from the next one but in reality they are amazingly close in a lot of cases . To do this sort of work you 100% need a microscope.
Good luck with your projects and I will keep posting all sorts of soldering videos so as to hopefully help people if they need it . Thanks again👍
@@mrsolderfix3996Would a magnifying lamp be sufficient for hobby level soldering?
Hi , magnifying lamps are pretty useful down to certain size components . Get one with a light ring on it and this should be good enough for most home hobby soldering . When you get more serious down to 0402 or 0201 size components for example you will then really need a microscope . Thank you for your comments , good luck ,👍
@mrsolderfix3996 Thank you for response!
Brilliant. You make it look so easy. I’m still practicing!
Hi , thank you , I guess I've just done lots of practice over the years and to me that is a big help . You learn new techniques the more you do , you will eventually learn the best way that suits yourself .
I will always post new videos to my channel , hopefully I can help a few people out . Good luck , thanks again for your time 👍
excellent Tutorial .. Big thumbs up.. really helpful i saved this in my diy playlist.. for future ref.. finally TH-cam algorithm doing a good job..
What temperature do you use for your soldering iron? I find it very difficult to keep my tip clean so long with lead free.
Hi . All my soldering Is done roughly around 350 degrees centigrade , using a variety of different size tips .
I know what you mean about the tip sometimes being difficult to keep clean . I sometimes scrape very carefully over the end of the tip with a fine scalpel then dip in tip cleaner which re-tins the end . Or I just re-tin the end with leaded solder then clean off and then coat In lead free so it's not contaminated . Between these methods I always get there in the end . Thanks for your time , much appreciated 👍
Very nice videos, indeed! I watched your entire soldering series and you make it look so damn easy, until one needs to pick up the iron and do it himself.
I know the tools you use make the difference and I just wanted to konw what is your take on using the TS100 iron with the TS-B2 tip for general purpose SMD (1205, 0805 and, maybe but not necessary, 0604). The specs of the tip basically are conical, 10mm long and a radius of 0.5mm at the end. If anyone else would like to shareir the experience of using this iron for DIY projects, NOT full-time job on soldering, please put your words here.
Also, I wanted to know if you are able to do all that SMD soldering (0605, 0402) with the naked eye or you use any sort of magnification. If yes, what kind of tools for magnification do you use?
Thank you again for sharing your soldering techniques. They are really instructive and very high quality.
Hi , thank you for your support , much appreciated.
The tools I do use when I need magnification are ( model number 8087046 LA8093LEDRS/EUK ) , a simple aid that sits on your desk with a built in LED light ring . If I need a fully blown up view of a PCB I have a stereo long reach microscope , purchased from GT Vision ( England ) , their own branded one , a great scope which allows me to do microscopic work + the long arm means I can get very large boards under it.
I haven't heard of the iron you mentioned so I can't really comment on that at all , but maybe other people if reading this can leave a comment about it .
I do use a microscope when doing below 0603 size components , even though I have perfect close vision , using a microscope just gives you an amazing view of your board .
Hope that helps , thank you again for your comment and good luck with all your soldering projects 👍
Definitely one of my favorite tutorials!
Hi . Thank you , much appreciated . I'm glad you enjoyed the video and hopefully found it useful . I have lots more postings on TH-cam and will be posting more in the near future , thanks again for your support 👍
idrestech.co.in/product/led-bulb-repair-kit-with-led-pcb-9w/?unapproved=140&moderation-hash=1b4051fafd18752a773c1e285bc1cb6a#comment-140
Thanks for this video, improved my results by a mile.
Hi , thank you. I'm glad the video helped you out with your soldering. I will always post more soldering videos when I get the time . Thanks again and good luck with any future soldering projects 👍
I'm learning to do SMD components currently, and this has been quite helpful in learning how to make it easier. I am curious what you are using to clean the flux off--is it an IPA wipe or just a wipe with nothing on it?
Hi , thank you for your comment. I only ever use 2 different cleaning fluids . These are Ultrasolve and if I can't get this I use one called Flux off . They are available from the normal places , Farnell , RS Components, Rapid Online , Mouser , DIGIKEY etc. They can be funny about sending it out to private individuals due to its nature , flammable etc. Worth asking them . I normally buy 1 litre bottles of Ultrasolve , decant some into a small lid for instance then dip a Gtek dry wipe ( from Grove sales ) , based in the UK and wipe away as in my videos . I've posted a complete video on TH-cam showing the methods I use to clean my boards from single components to complete boards . All info is in this video . Thanks again , take care 👍
@@mrsolderfix3996 Thank you; I'm assuming this is the video being referred to? th-cam.com/video/FwjOrT3tIjw/w-d-xo.html
Hi , yes , this is the one. Hopefully it's of use to you .
I think its equally important to teach ppl how to fix their screw ups too. Lovely guide thanks :)
Love the videos thank you! SMD doesn't seem so hard.. get a good magnifying light, good soldering with appropriate tip and LOTS of flux :)
Hi , thank you for your comment, much appreciated. I'm glad you enjoy the videos . We can all learn from each other , hopefully I can help a few people out . The 3 main things that really helped me were a good iron with different tips , different thickness solders and FLUX . Plus one other vital ingredient, PATIENCE. Thanks again , take care 👍
Really well made instructive helpful videos. Nice camera angles & nice soldering! Thank you.
Hi , thank you for your comment , much appreciated. I'm glad you enjoy the videos . I try and get side views when I'm soldering as I think it gives people a clearer idea of what's going on .
I will post more videos when I can , thank you again for your kind words 👍
cannot wait for more content to come!
Hi . Thank you for your support . I will always keep putting content up if people want it . I'm just a bit busy lately so I've been a bit sporadic , but there will be more coming in the near future . Thanks again , much appreciated 👍
Came for the tips, stayed to watch the beautiful soldering
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . I've posted a similar video on TH-cam since this one ( part 4 ) which is more in depth also with much clearer clarity. My videos pretty much since this one have been filmed with better equipment so hopefully they are even more useful for people and can be viewed more clearly
Thanks again for your support , take care 👍
Thanks for showing soldering methods
Hi , thank you for watching the video and commenting . I've posted many other videos showing different soldering methods , my last 30 or so are of a much better clarity and sound quality . Thanks again , take care 👍
great tutorial! It will be better if the iron temperature is given detailly when different kinds of components were soldered
Excellent video, everything so very well explained, photography second to none.
Hi . Thank you for your comment, much appreciated . If I can help a few people then that's a bonus . Glad you enjoyed the video , thanks again 👍
You're a magician with these things. I wanted to try a repair on my old motherboard, but my eyes are too bad to see such small things.
Hi , thank you for your comment , much appreciated. With practice everyone can get better , plus if you could get hold of a microscope it's amazing what you can then do . Hopefully you'll give it a go , good luck and thank you again for your support 👍
Классная пайка! Золотые руки! Большое спасибо за ролик!
Человек показывает как паять точно НЕ НАДО!
Just Brilliant Video, I'm Just a hobbyist Electronic repair Person, I enjoyed watching a pro. Thank you
Hi , thank you for your comment, much appreciated. If people enjoy the videos and can learn something from them then it makes it worthwhile posting them . Soon after this video was posted I learnt to do the editing myself and ended up with better clarity and the volume more matched from music to voice . Thanks again , take care 👍
Excellent video tutorial, will be sharing with my students, thanks!
Hi , thank you for your comment, it's very much appreciated. I'm glad you found the video useful. I've done a number of other soldering postings on TH-cam , they seem to have got better as I've gone along ( picture clarity , volume etc ) but hopefully people can still learn from even my early ones . I only use phone cameras ( with a macro lens attached ) to do my recordings but I'm glad people still find them pretty clear to watch ( I have a much better phone camera now ) . It would be great if you could share with people and I will always keep posting more when I get the time as I've still got lots of information on soldering to share with people who want to learn . Thanks again for your support 👍
I love your videos, I learned a lot of things from you. Thanks for sharing your technique, I find it spectacular!
Hi , thank you for your support of my channel , very kind of you . I'm glad you find the videos useful , that's great to hear . Thanks again , take care 👍
Your videos are all great, god bless you. Hope you would find sometime to make more. Always appreciated
Hi . Thank you for your nice comment . I will always keep putting more videos on while people find them useful ( I've just been a bit busy lately , so haven't been able to post any ) but very soon they will start again. Thanks again , much appreciated 👍
Thank you for refreshing our brains
Hi , thank you for your comment , much appreciated 👍
Please recommend where can we buy this equipment, Thank you
Hi , I purchase most of my tools , fluxes and cleaning fluid from RS Components , Farnell or Rapid Online . All these are good to order in Europe . I'm based in England so all good .
I use SMFL200D flux from places mentioned above. Cleaning wipes I get from Grove Sales ( England ) about £5 for a pack of 100 ) .
Cleaning fluid I use is called Ultrasolve ( best there is ) again from places above.
I've posted separate videos on all the above mentioned products if you need any more information.
All my solders I purchase from BLT Circuits ( England ) , all sizes , lead free and leaded available. A very good firm .
Hope that all helps you , good luck and thanks again for your comments 👍
Excellent SMD soldering tutorial! Great skill and technique. Thank you!
Hi , thank you for your comment, much appreciated. I've posted more similar videos to this one on TH-cam but they are more in depth and have much better picture and sound clarity . Maybe they will be of use to you . Thank you for your support of my channel , very kind of you . Thanks again , take care 👍
@@mrsolderfix3996 I have watched a few now. Really enjoying all of them!
Hi , thank you for your support, very kind . I've tried to improve the videos as I've gone along . My early ones were a bit sketchy , sound and picture but I believe they are much improved since then . People seem to enjoy them anyway . Thanks again and I will post more when I get some spare time 👍
I enjoy doing each pin individual in drag! 😳 Enjoyed seeing your techniques. Happy days. 👌✌️👍🇬🇧
Hi , thank you for your comment, much appreciated. The more techniques we all see the better for us to all learn . Thanks again , take care 👍
These are some of the most beautiful joints I’ve ever seen :’)
Hi , thank you , very kind of you . I'm glad you found the video enjoyable. I've actually re-edited this video and uploaded it to TH-cam so I now have 2 versions on there with the other version clearer than the one you've watched. All my latest videos are much clearer as I now edit them differently and I'm much happier with them . I will post more when I get some spare time . Thanks again 👍
Wow..you got real sturdy hands and insane accuracy bro..thank you!
Hi , thank you for your comment , much appreciated. I guess I've just practiced soldering for many years now so have learnt to be steady . I have a more recent video similar to this one ( part 4 ) that is clearer and in my opinion better , I was hoping it would take over from this one , hopefully one day it will pick up . Thanks again for your support , take care 👍
What's your preference for precision bolts and what type solder do you use for smallest components? I know a good soldering specialist has his own tricks and here you are giving them free.
Michael Caine teaches soldering, I love it!
Hi Mr SolderFix, your videos are appreciated for the teaching of those of us who do not know. If you could help me by recommending the materials I need to repair/replace a blown fuse F3: 3A/24V on a thinkpad t430s computer motherboard that does not backlight on the screen.
Best regards
in this video you have a practice that I don't have in soldering these small components and but anyway thank you and I will try to solder these components.
Hi thank you for your comment , much appreciated. If you keep practicing and never give up you will get there I'm sure . You need a decent iron that takes various sizes of tips and a few good tools , tweezers , cutters etc. Use flux , this will help massively , and some patience . Good luck with your projects 👍
I am a novice at soldering and find your videos to be very informative. I was just wondering what is a safe temperature to keep your soldering iron at for SMD? Also wondering when tinning your soldering iron tip do you use sandpaper to form a base layer of solder on the tip or how would that be done? Thank you in advance.
Outstanding work 👏
Hi , thank you for watching the video and commenting , much appreciated . This video is quite old now and since then I have improved the quality ( picture and sound ) so maybe my more recent ones will be of use to you . Thanks again for your support , take care 👍
this is my new type of therapy video..good job sir..
Hi , thank you for your comment , glad you enjoyed the video. I have many other videos on TH-cam showing different aspects of soldering with many of these since this one was posted being in a lot sharper detail and better sound due to new equipment. Hopefully these can be enjoyable for you as well . Thanks again for your time , very much appreciated 👍
Wow!!! Master at his skills. Wish i found this video earlier as i messed up a chip on a video game console. You are very informative and showed how easy one can make it. I will give it another go. Like and subscribe done!!!
Hi , thank you for watching the video and commenting , much appreciated . This video is pretty old now and the quality I get now when I film is so much better . I'm glad you still enjoyed it though , great to hear . Thanks again for your support , take care 👍
Much greatly explained. thank you. thumbs up done
Hi , thank you . I'm glad you enjoyed the video and hopefully found it useful . Thanks again for watching , much appreciated 👍
Great video. Thanks for sharing.
Hi . Thank you . I'm glad you enjoyed the video . I will keep posting more in the future while people keep enjoying them. Thanks again 👍
What a satisfying and relaxing video to watch. Sadly, not the same with my diys lol.
Hi . Thank you for your comment , much appreciated . I'm glad you found the video ok , all I try to do is give another option for people when soldering , hopefully it's helps some people. Thanks again 👍
ah man you make it look so easy lol. ive got motherboards that need new cpu sockets and i'd love to be able to repair them as its not exactly well heard of. i tried simple soldering using a gas solder (cheap crap i learnt fast dont worry) on an old board to practice, and i couldnt even place the smd in position it looked like i had parkinsons as its so small. although i wasnt in a good mind state then. i have a few jobs needing some soldering tlc shall we say but im not touching a thing till yet. videos like this, detailing everything helps a lot. thanks man.
PS: if you can change cpu sockets youll make my whole year lol.
Yeah! Many Thanks! Cheers!
Hi . Thank you . Glad you found the video useful 👍
Some people are gifted with a steady hand.
Hi , thank you for your support of my channel , very much appreciated. Good luck with all of your soldering projects and take care 👍
Now I know that I am soldering wrong. Excellent sir. Thank u very much.
Hi , thank you for your comment, much appreciated. I'm glad the video was useful for you , hopefully my other videos can help a few people out as well with their soldering issues . Thanks again , take care 👍
Muy bien ,excelente clase de soldadura,aprendi un poco mas con uds👍👍🤜🤜🤝🤝
Hi , thank you for your comment , much appreciated 👍
Hi, thank you for videos. What kind of flux did you use in this video?
Excellent informative 👍👌
Hi , thank you for your comment, I'm glad you found the video useful 👍
Very good, I learned, thank you, congratulations.
Hi . Thank you . I'm glad you found the video useful 👍
What device are you using to magnify for soldering (the digital camera with zoom)? Do you watch the magnified video on a screen while you are soldering? Really great video
Just seen your latest video and question answered, thank you....
Hi . I just sent a reply but I think you'd already found the other video by that time so sorry about that. Thanks for watching the video's , much appreciated 👍
Wow! Brilliant.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . I've actually posted a new more recent video , similar to this ( part 4 ) which is more in depth and has better clarity , better sound etc . Maybe this will be of use to you . Thanks again , take care 👍
Thank you for very instructive vid! Well done!
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video . I've recently posted a similar video ( part 4) which is clearer and more in depth than this one . It may be of use to you . Thanks again and good luck with all your soldering projects 👍
Very nice work.
Thank you.
Hi . Thank you , I'm glad you enjoyed the video , much appreciated 👍
Beautiful job! Thank you for share!
Hi . Thanks for your support , much appreciated. Glad you enjoyed the video 👍
@@mrsolderfix3996 Greetings from Brazil! 👏
Hi . Good luck with all your projects, thanks again for watching 👍
Thank you very much for your tutorial
Hi , thank you for your comment , much appreciated. I've done a recent , more in depth guide along the same lines as this one , which may help lots of people . Thanks again , good luck with all your soldering 👍
Very instructional videos. Thank you for doing them. May I know what kind of microscope are you using?
Hi . Thank you for your great comment. I use a stereo microscope with a long arm on it so as you can get large boards underneath it no problem . You really do need a long reach arm on your scope so you can basically do any size board. It comes with a boom stand and is very stable. I don't use a microscope camera , I use a camera next to the work for different camera shots . You probably know but a lot of scopes come with a camera option , but I didn't want this option. Lots of companies selling this type of scope and i love mine . Hope that helps , and thank you again👍
Simply lovely 💯
Hi , thank you for your comment , much appreciated , hopefully you found the video useful. Since this video was posted I've worked out how to get better picture clarity , so my last 3 or 4 now have more quality . One day I will clean this one up as well . Thanks again 👍
Mr Solder! Where have you been? An ordinary sounding bloke like me, but very talented with the iron.. I've subbed and am just about to start a Binge watch. Got a feeling you're going to be a great help to me as the old new boy!
Take care.
Hi , thank you for your comment , much appreciated. I'm glad you found my channel , hopefully I can help you out . My videos seem to have got better as I've gone along ( my older ones weren't as good quality , i.e sound etc , but are still ok'ish ) but I've now worked out how to get them better , so all future ones should be pretty decent . Hope you get on ok , thanks again and good luck 👍
Thank you very much for these educational videos.. Weldone
Hi . Hi , thank you for your support , much appreciated . I'm glad you find the videos useful and I will keep posting more soon , I'm just a bit busy at the moment . Thanks again 👍
Totally enjoyed your presentation, great tips.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . I've posted many more soldering videos since with much better clarity , hopefully they will be useful for a few people. Thanks again , take care 👍
Nice work continue 👍
Hi , thank you for your comment, much appreciated 👍
Well done
Hi , thank you for watching much appreciated , glad you enjoyed the video 👍
Perfect. Thank you.
Hi , thank you for your comment, much appreciated. Glad you enjoyed the video 👍
Very helpful...awesome job...thanks...
Hi . Thank you for your kind words , I'm glad you found the video useful. I've also done a part 2 video along the same lines and will be putting more videos like this up in the near future as well as other soldering videos . Thanks again and good luck with your projects 👍
Good video.
Funny see it too.
Tks sharing your dexterity.
Hi , thank you for your support , very much appreciated. I'm glad you enjoyed the video 👍
his accent is really N-o-i-c-e
All jokes aside, this is really helpful. Thank you
Hi , thank you for your comment , hope you enjoyed the video 👍
Excellent dear boy! I need some of that solder and flux! My 1mm stuff is a bit much.
Hi . Thank you for watching . The flux I use is called SMFL200D . It comes in a 200ml spray can . I just squirt a small amount into a small container and apply using a dipped Ty wrap. About £14 a can from Farnell , RS Components , seen it on eBay as well . Pretty easy to get . I generally use 0.25mm solder ( leaded and unleaded from company in England called BLT Circuits ) very good stuff they supply , would recommend. Hope that helps , thanks again 👍