also looking forward to seeing your process for replacing the rocker cover and gasket on the Pinto, something i'll be doing for the first time soon but surprisingly no vids on YT that show that i can find...
Hi it’s a simple job. It’s a cork gasket that I like apply a thin layer of oil too on both sides so it fits the rocket cover nicely, then line up all the holes on the head. It’s important not to overtighten so not to compress it too much which can cause leaks. Not sure what the torque setting is off top of my head. I didn’t make a video of it unfortunately. The car is back together and running, just in storage right now
hi,ive never taken a head off so watching you do it then i think i will give it a go..is it essential you have a torque wrench to tighten it back down? and do you have to replace all the gaskets with new ones? can you use all the old bolts ?
Hi thanks for your message. Yes you will need a torque wrench and you will need to find out the torque settings for your engine, if it’s a standard pinto you can use the settings I provided during the video I produced of putting the head back on. Yes you always need to put a new gasket on, there are many different types and thicknesses so make sure you have the right one. You will need to work out if you bolts are the earlier stretch type, these always need replacing. If they are splined bolts with 12 splines they can be reused
Hi part 3 and part 4 are on the channel. The engine is back together now and car in storage for the winter. I still have a video or two to publish. Let me know if you can to find it and thanks for watching.
@@alfatechniks887 Find the video you want in your videos. Under the video, click the “Add to” button. (The three lines and a plus symbol.) From the dropdown menu, choose, “+ Create new playlist.” Enter the playlist name. Choose the channel privacy settings: public, unlisted, or private. Click “Create.
also looking forward to seeing your process for replacing the rocker cover and gasket on the Pinto, something i'll be doing for the first time soon but surprisingly no vids on YT that show that i can find...
Hi it’s a simple job. It’s a cork gasket that I like apply a thin layer of oil too on both sides so it fits the rocket cover nicely, then line up all the holes on the head. It’s important not to overtighten so not to compress it too much which can cause leaks. Not sure what the torque setting is off top of my head. I didn’t make a video of it unfortunately. The car is back together and running, just in storage right now
What gasket was used for the rocker cover? Thanks
Always put new head bolts in mate.
Old ones can be stretched and wont torque down properly
Thanks for your advice, these are the non-stretch type. There are two types.
hi,ive never taken a head off so watching you do it then i think i will give it a go..is it essential you have a torque wrench to tighten it back down? and do you have to replace all the gaskets with new ones? can you use all the old bolts ?
Hi thanks for your message. Yes you will need a torque wrench and you will need to find out the torque settings for your engine, if it’s a standard pinto you can use the settings I provided during the video I produced of putting the head back on. Yes you always need to put a new gasket on, there are many different types and thicknesses so make sure you have the right one. You will need to work out if you bolts are the earlier stretch type, these always need replacing. If they are splined bolts with 12 splines they can be reused
@@alfatechniks887 thanks mate will take a look at video
Donde consigo la polea graduada?
Burton Power
Hi did you ever make a follow up video to this?, cant seem to see it on your channel but guessing your engine isnt still in bits!?
Hi part 3 and part 4 are on the channel. The engine is back together now and car in storage for the winter. I still have a video or two to publish. Let me know if you can to find it and thanks for watching.
@@alfatechniks887 aha found them thanks, :-) could be a good idea to make this series into a playlist...thanks for sharing your work.
@@TinoKolarides how do you make into a playlist? how will try and find out. thank for your support and watching, hope you enjoy them
@@alfatechniks887 Find the video you want in your videos.
Under the video, click the “Add to” button. (The three lines and a plus symbol.)
From the dropdown menu, choose, “+ Create new playlist.”
Enter the playlist name.
Choose the channel privacy settings: public, unlisted, or private.
Click “Create.