DIY Stickers: How to make stickers with your Cricut
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Cricut Maker: amzn.to/3uxGQqf
Printer: amzn.to/3QZNheL
Squeegee: amzn.to/3QBmZzn
Slice blade: amzn.to/3Qwd5zb
Starcraft Printable Vinyl: www.143vinyl.com/starcraft-ma...
Starcraft UV Laminate: www.143vinyl.com/starcraft-uv...
USE CODE “KARLEY” ON STARCRAFT PRODUCTS TO SAVE MONEY
Skip Ahead:
Chapters:
00:00 Introduction
00:41 Print then cut parameters
03:01 Turning your image into a printable image
03:49 Adding an offset (shadow background) to your image
05:17 How to contour an image
08:29 How to upload your own image
10:38 How to fit your images on the largest print size
12:00 How to cut out your sticker completely to create an individual sticker
13:00 Setting up printer settings for the best print quality
17:05 Apply gloss laminate to stickers
18:11 Cut settings to create individual stickers on your Cricut
21:40 Adding easy peel slit
22:36 Creating sticker sheets in Design Space
25:45 Cut settings to create a sticker sheet
28:10 Sticker sheet reveal
29:03 Sticker sheet tip
30:17 Default settings to cut stickers
32:17 Closing tips
Website: karleyhall.com/
TH-cam: th-cam.com/users/karleyhall?su...
Instagram: / karley.hall
Facebook: / karleyhallcreative
Facebook Group: / cricutcraftswithkarley
*Disclaimer: Some links above are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own. - แนวปฏิบัติและการใช้ชีวิต
This was a super helpful tutorial, but I wanted to add that since the recent update, cricut let’s you print at a larger size now. It’s an odd measurement, but it told me I can print up to 7.44x 8.25 inches or something like that and it works! It’s no longer constrained by a box, just those little corner margins.
Yes! So thankful that they expanded the printable area! I'll pin this comment so people know to test the printable area. The max area I've been able to print on 8.5 x 11 was 6.82” x 9.32” but the error message says you can only print up to 6.76 x 8.66. So test to see what your limits are!
@@KarleyHallyeah I think depending on what you’re uploading it changes but I was pleasantly surprised by it!! I had 4 ~4 inch stickers and it let me have them all, but I had to rotate a few. I upload original art and designs and let it auto resize for me. But thank you!! I’m so happy I found this tutorial I never knew about a ceramic blade either. I’ve been learning to do easy peel cuts where you duplicate the offset a bunch, but this seems way easier. And I’m so happy about your screen printing squeegee too, I was struggling with my holographic paper, my regular clear stuff has an easy peel strip, but my holographic paper doesn’t and was about to give up, but what you did was so smart so thank you! I’m still new to sticker making and trying to figure things out. I knew to not give up 😊
Oh also for the black lines besides tape, I tried the sharpie method and that works just as well too. You just trace the marks over the paper.
Interesting that our Makers can pick up the registration marks with the liner on top! Will have to try that tomorrow. Beautiful video, clear, comprehensive instructions. Many thanks!
I am still perfecting my sticker making and your video is AMAZING! So perfect and professional, thank you for doing this. Even the explanation about why my Explorer wouldn't read registration lines, no one has ever explained why that won't work for me
I just came upon this video and wanted to say that this is the most comprehensive tutorial I have seen on TH-cam for making stickers, thank you!!!
Hands down the most thorough and easily understood sticker making video I’ve seen in years! I am inspired to start making stickers again. Thank you! ❤
FINALLY!!! Every single step explained with detailed visual in a follow along style!!! You are an absolute GEM!!! I have recommended this video to everyone I know. Thank you sooooooo much for this!!
Thank you so much!!! That helps my channel so much and allows me to keep my content free 🥰🥰🥰
I appreciate your detailed comparisons, & your content is always useful! Thank you!
Amazing tutorial! Thanks!
I love your ideas of cutting rectangle around sticker sheet and the use of the ceramic slicer! Great info!
MOST AWESOME sticker tutorial I’ve ever seen! Thanks so much, Karley!
This is an incredibly comprehensive tutorial. Thank you so much
THANK YOU! Your tutorials are GREAT! No fluff. Just great instructions. ❤
Best sticker tutorial I've seen and I've seen a lot!! Thank you!
I have seen many many videos about stickers and you actually had a few details I never heard and work great! Thanks 😊
I have watched this thru so many times. I Love this tutorial.
I’ve been searching for a while for something this thorough. Thank you so much!
This video is so great that I had to watch it again!!
This is a great Tutorial. Thank you!!
Theeee BEST STICKER VIDEO SO FAR!!! 🎉Thank uuuuu
I have got to say that this is one of the BEST sticker video that I have come across on TH-cam!. You were very detailed in your explanation, and we all appreciate you.
Hands down the best tutorial!!! I HAVE WATCHED TONS! that’s an understatement. Very clear ,the advices and your voice was nice an clear. Ty! For a FULL tutorial.
Best Sticker Tutorial! Thank you!!
very good explanation! thank you
Thank you so much! This has been the best detailed video for stickers on the cricut maker that I have come across! It has helped me so much! 😊
The best sticker how to! Thank you!
The time I have taken moving every item from mat to mat trying to get the most on one. Absolutely love this video it is excellent. Thank you
Best stickers explanation 👌🏽
Thank you so much!!! I'm using the same sticker paper and I had a hard time trying to figure out how many times to cut the stickers. This video was so very helpful and so informative. I was able to cut them with no issues. YAY!!!🤩
Really love this video helped me with creating my stickers thank you again !
Just wanted to say thanks. I´ve been strugling with this for weeks and finally got it due to your video. Thanks a lot :))
Hands down the BEST tutorial to follow. All the different types is amazing. Thank you😚😍😍
This is the best and clearest guide for printing stickers with Cricut that I have seen.
Thanks! Great video. I now understand so much more about vinyl stickers.
Excellent tutorial, super concise, clear instruction and the easiest instructions I've watched thus far on this process! Saved for later! Thank you!
This is The best tutorial ! I understand every steps clearly thank you you saved my time sooo much
thanks so much! I have been looking for something like this
Thank you so much!
I just came across your channel, and I must say that this is the best sticker tutorial I've seen. You explained everything so clearly. I'm a new subscriber to your channel. Tfs! 😎
This is the best and most comprehensive (without being an hour)sticker tutorial I have ever seen. Fantastic video thank you. I feel like I can finally go make perfect stickers now.
Me too
Thank you Karley for this video. I want so badly to create stickers for my grandkids and after seeing this I feel ready to jump in. I love that ceramic cutter and your large scraper. 😁 I'm always adding new tools everytime I learn a new technique.
I can’t wait to see what you make! If you’re on Facebook- make sure to share photos in the group! facebook.com/groups/cricutcraftswithkarley
This was the best video I have seen on the print then cut stickers.
Thanks Diana!!!
Thank you soo much !!!
This video was super helpful. I've had my explore2 since 2019 and recently purchased maker3, this is the first video that has actually explained step by step how to print n cut a good sticker. I'm a subscriber and follower. I'm actually making better stickers. Thank you, for your time and sharing.
Thank you for that😊❤
Absolutely a wonderful tutorial, Karley!!! I've referenced your previous TH-cam videos for making stickers, but this one is the BEST! All in one tutorial 😀I've always used StarCraft printable vinyl for my stickers (except when I need the stickers to be very thin, then I use PaperVisual) and the UV matte sheet. I've been very pleased with both StarCraft products. I've popped the squeegee into my Amazon cart along with the ceramic slicer. You have no idea how glad I am that you are making videos again!
Julie! Your comments mean so much to me! Thank you for always taking the time to watch my content and comment such heartfelt sentiments! My husband said to me this morning, Julie always leaves you the nicest comments! He’s right- I so look forward to hearing from you 😍 and so appreciate your support!
@@KarleyHall 😀 My sister and I got our Cricut Maker in the spring of 2021. I had never heard of such a machine but my sister, having been an elementary principal, knew of them. After she retired, she began a new career writing a children's mystery book series. She wanted to make some crafts to go along with her stories. Yours were the first series of TH-cam videos I watched to learn how to use this new "contraption." 😉 I've always appreciated your honesty in your videos. Looking forward to the next one!
Thank you very informative!
Great video thank you
Hi - this was an AMAZING video. Your instructions were so clear and concise and very easy to understand. I appreciate you for this. That “squeegee” action is super nice too. I would love to see you work your magic using your Cricut Maker to do larger sized greeting cards like 5x7 or 6x9…seems like I am always in the market for more tutorials for these size cards. TH-cam has millions for the A2 size but not a lot for the others. Oh well, just a thought. Thanks again..!!
Great feedback! Thank you!!
Thanks for the chapters for quick navigating! Also, I originally came to figure out how to do a release cut for easy peeling, but my question is, what material do you use? The paper backing seems very thick and rigid on these.
Thank you.
Hi! I made stickers with this tutorial and they came out so cute! How can I make a sticker that just has a regular square or circle background to cut around, instead of the wavy offset?
Wow!! Thank you! My kids would Love to have their own sticker sheets!!
With the sticker sheet how would you design the background if you wanted to put a banner with your kids name and a design on the back, around your sticker?
I've never print then cut before agh scary lol
I've just subscribed
Hello, can I use a sublimation printer for stickers? Thank you for your videos they help a lot.
hi! need your help/advice! I am making stickers and wanting to print them cut to create a sticker sheet but my cricut keeps cutting the stickers out each time instead of doing a kiss cut! any advice?
My sticker sheets will not feed through my printer, is there another option to print?
your offset work really fast 😁!mine 😢
Also what is the difference between flattening and attaching the stickers and when do we need to use this feature?
Flattening turns your image into a print the cut image. Attaching holds things together in place so they don’t move when on your cutting mat :)
Can you do this with the cricut air explorer 2?
Yep!! 🎉
does cricut allow only one type of paper size or can I use the normal A4 paper that is 8.3 x 11.7 inches ?
You can use A4 as a setting!
Could I just use glossy sticker paper instead of adding the laminate?
You can- but it’s not quite as durable!
Please can some one tell me how to go from die cut to kiss cut?? I can only seem to get die cut stickers with my maker 3 and I don’t know how to make them kiss cut. I’ve watched various videos but don’t know what that key difference is that gets them kiss cut stickers instead of die cut
The kiss cut will happen when you use the sticker paper cut settings. If you add multiple shapes to add cut lines- you can completely cut out your sticker.
hi love the tutorial, But for some reason when I flatten it, it wont let me use the contour. Am I doing something wrong?
Nope! That’s just the case! Once flattened contour is no longer an option. You’ll have to unflatten and then contour.
You have to contour first before flattening :)
hold up...where do you get weld offset?
In the offset window- there is an option to “weld” your offsets! But you can also create the offset- highlight it all and weld it after if you don’t have that option!
I can not get the contour to highlight. The flattened shows up, however I can not get it not to cut open space areas on my stickers. What ambi doing wrong?
If you have a bunch of images- flatten them all together and then add a background shape (rectangle) and attach that to the flattened group
@@KarleyHall I'll try it
For print settings which should we use landscape or portrait
Portrait :)
@@KarleyHall thank you so much im trying but can't get my cricut to cut and read the registration marks.
@@ladys702 what are you printing on and what machine do you have?
@@KarleyHall I'm using j and.j packaging glossy vinyl sticker paper and I brought some self.laminate sheets. I have a cricut explore air 2
@@ladys702 that’s your problem! The sensors on the explore machine can’t read through the gloss! If you covered the black lines, it’s reflecting up to your sensor and causing the machine confusion. Don’t cover the black lines or apply matte scotch tape over the gloss to take away the shine.
What the heck did I do wrong, follow the steps but the circuit only cut around the large background square, no images on the square?????
Sounds like you flattened everything together! You need to ensure you attach the stickers to the rectangle instead :)
My mom wont let me play roblox on this computer
Sorry dude!
Can u tell me the name of your Facebook group
facebook.com/groups/cricutcraftswithkarley
Hope to see you there!