TRANSFORMED my BMW 135i with a 1M Bumper!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- I've always wanted to fit a 1M bumper on my 135i. Today it finally happened and I am SO stoked with the result! If you want one for your 1 series, see below...
1M Style bumper for E82: www.kiesmotors...
Kies Motorsports on TH-cam: bit.ly/2Q4A3kC
-------
📷 Instagram: / jakespence
🏁 My BMW merchandise: bimmerstreet.com
🌟 Become a Patron: / jake_spence
💰 Donate to the channel: bit.ly/2HhSDAZ
📬 Send me something!
Jake Spence
W3178 Van Roy Rd #135
Appleton, WI 54915
-------
🚀 2008 BMW 135i (752whp/691wtq) 🚀
Complete Build Log: my1series.com
PERFORMANCE
- Doc Race 6266 Single Turbo Kit: bit.ly/302yZjz
- Doc Race Intake Manifold & PI Kit: bit.ly/2PO3CEI
- Doc Race 3" Charge Pipe: bit.ly/2VjciZQ
- TiAL Q Blow Off Valve: amzn.to/2HdILpt
- VRSF 7.5" Race Intercooler: bit.ly/2vLjvm8
- PR Ignition Kit: bit.ly/2VUn1cy
- PR Stage 3+ Fuel Pumps: bit.ly/2H6m3k7
- BMP Port Injection Kit (for OEM intake): bit.ly/2MQJDUs
- Charge Pipe & BOV (for OEM intake): bit.ly/2DVzrHo
- BMS PCV: amzn.to/2H4moF8
- NGK 97506 Spark Plugs @ 0.022": bit.ly/2TvoDVQ
ACCESSORIES
- BMS Cowl Filters: bit.ly/2l4082g
- BMS Oil Catch Can: bit.ly/2HTxsaJ
- Billet Oil Filter Cap: bit.ly/2nDj1KW
- 3.5 Bar TMAP Sensor Kit: bit.ly/2XE1uWq
TUNING
- JB4 Tuner: bit.ly/2t8Hevi
- JB4 Bluetooth Connect Kit: bit.ly/2DXGOOH
- JB4 Port Injection Control Module: bit.ly/2RBP8Zq
- JB4 NLS/2-Step Relay: bit.ly/2WZ6YXy
- Free JB4+MHD Flashes: bit.ly/2V79udi
- MHD Flashing Cable: amzn.to/2qGKbl2
- OTG USB Adapter: amzn.to/2qKvc9R
TRANSMISSION (MANUAL)
- SPEC Stage 3+ Clutch: bit.ly/2JsSehU
- Single Mass Flywheel: bit.ly/2JtLtfN
- Race Transmission Mounts: bit.ly/2sOXEJH
- RTD Short Shifter: bit.ly/2vIKzm3
- Teflon Shifter Bushings (OEM Shifter): bit.ly/2V99OZc
- Upgraded Clutch Delay Valve: bit.ly/2LudXYd
- Clutch Pedal Stop: bit.ly/2Vcjkec
- Royal Purple Trans Fluid (2 qts): amzn.to/2VqSLqF
- Redline 75W90 Diff Fluid (2 qts): amzn.to/2J6pPt7
WHEELS/SUSPENSION/BRAKES
- Eibach Pro-Kit Lowering Springs: bit.ly/2HFyfqm
- APEX ARC-8 18" Wheels (Anthracite): bit.ly/2LJxkrx
- Front Tires (235/40/18): amzn.to/2tcOMNv
- Rear Tires: (265/35/18): amzn.to/2DoIfEv
- 10mm Spacers (Rear): bit.ly/2LGPaLC
- Wheel Stud Conversion Kit: bit.ly/2zPJ7mW
- StopTech Brake Kit: amzn.to/2qKFWVA
EXTERIOR
- LUX H8 180 LED Angel Eyes: amzn.to/2HKIDPi
- Gloss Black Front Grilles: bit.ly/2VlvRk9
- Black BMW Roundel Overlay Kit: bit.ly/2sZHpsv
- BMW Black Line Tail Lights: bit.ly/2y1dhCO
- BMW Performance Trunk Spoiler: amzn.to/2rA6byr
- Rieger Rear Diffuser: bit.ly/301Oqsp
- Front Splitter: bit.ly/2H8qzjl
- Splitter Support Rods: amzn.to/2XytQ4w
- Sideskirt Splitters: bit.ly/2vGdAyW
- Smoked LED Side Markers: amzn.to/2Lw5h3l
- LED License Plate Lights: amzn.to/2Hainkd
INTERIOR
- NRW Custom Steering Wheel: bit.ly/2PQugwR
- BMW Performance Shifter Boot: bit.ly/2J5idLJ
- 1M Floor Mats: bit.ly/2JKDYjK
- LED Interior Kit: bit.ly/2JsL79c
- ZHP Shift Knob (for OEM Shifter): bit.ly/2TAaozh
⛽ BMW OIL CHANGES I SWEAR BY
- Motul X-cess 5W-40 Oil (5L): amzn.to/2HKTbOv
- Motul X-cess 5W-40 Oil (1L) x2: amzn.to/2HbGpqZ
- Mann Oil Filter: amzn.to/2HLiPT5
- Magnetic Drain Plug: amzn.to/2EYwYsV
🔧 TOOLS I LOVE
- Dragy GPS Track Timer: amzn.to/2J4DILx
- BMW Wheel-Saver Socket: amzn.to/2JmOAVq
- BMW Jack Pad Adapter: bit.ly/2V7F7mX
- BMW Magnetic Spark Plug Socket: amzn.to/2VQGaw6
- 200-Piece Tool Kit: amzn.to/2zZlsRd
- Low-Pro Jack: amzn.to/2vq1g8F
- MaxJax Home Garage Lift: bit.ly/2WHGZZm
📸 MY EQUIPMENT
- Vlogging Camera: amzn.to/2H7Ggax
- Wide Angle Lens: amzn.to/2Uo7pyn
- Canon 50mm Lens: amzn.to/2YVFdkS
- RODE Microphone: amzn.to/2ViStSq
- Fluid Head Tripod: amzn.to/2IPWcix
- Camera Stabilizer: amzn.to/2D5N5Hg
- LED Camera Light: amzn.to/2H6SgJp
- DSLR Suction Mount: amzn.to/2Kkwrd3
- GoPro HERO7 BLACK: amzn.to/2Job7RE
- GoPro Suction Mount: amzn.to/2vLdq9m
- DJI Mavic Pro Drone: amzn.to/2H76iur
- Editing PC (it's a POWERHOUSE!): amzn.to/2V29ds8
This description contains affiliate links. If you click any of the links above to purchase a product, I will earn a small commission at no extra cost to you. Win-win!
As a 135i owner myself, you are doing upgrades the right way. Very good job! I was always a fan of the brake duct bumper version until you explained the differences which looks horrible... Thanks for this!
Thank you! Glad you enjoyed the comparison to the foglight vs. brake duct version. There is definitely a difference!
Your car looks pissed off, I love it
Haha it's an angry 1er now!
Yes!!!’ 😁😁 the aggressive look is my fav
😂😂 love that look
Just came across this video. I subscribed to your TH-cam after the whole rear end bushing change you did. I have a 335i but last week I got a 135i. I gotta have this bumper with your f series style headlights.car looks fantastic!
Thanks for watching and subscribing! Lots of 335i and 135i content here :)
AWESOMELY ADDICTIVE BUILD
Thank you! Glad you enjoy it.
Looks killer. I just picked up a 1M style bumper from ECS Tuning last week. I got the version with the air ducts not the fog light holes though. Hope it fits up as nice as yours.
Nice! You will like it either way. Let me know how it goes!
Have you ever seen an "M performance" bumper fitted on an E82? That one is my favorite. It's near impossible to get a hold of one though.
This looks good too. It's your car, do what makes you happy!
Yes I've seen that one. Not very common, and I'm not a huge fan of it, but it is pretty unique! Thanks for watching.
Nice car! But you should put back those undertrays as this will make your car faster. The air gets under the car w/o being disturbed. Better airflow = faster car.
True. It definitely has it's pros and cons.
Mines being wrapped and installed as we speak. Can't wait!
Nice! What color?
Jake Spence 3M satin frozen vanilla. I ordered the airduct version though without knowing there was a difference until seeing this video. Pretty annoying lol but if I can’t return it I’ll settle with it
@@BreezeLock how do you like the airduct version?
Computer Science I managed to get in contact with the supplier and have it switched out for the fog light version. I didnt like the difference in looks.
@@BreezeLock thats nice. I will go for the fog light version as well! I was deciding between the two
This definitely goes very well. It would be really interesting to see you run with Kies Motorsport 335👌😁. Both cars have a lot of effort and time invested in them.
I would love to do this!
Love the new look 🤙🏼
All thanks to you guys!
I got a 2013 128i recently and I’m wanting to do this to it. How much of a difference will there be between the 128 and the 135?
Yeah the bumper looks smokin bruh. Nice job!!
Looking good, I need this for my 135!Just copped it today can’t wait to post vids on it.
ZillaFullBoost no.
1M style front bumper is a HUGE change, from sky to earth!! You shouldn’t throw your stock bumper away. Keep it just in case or sell it to someone who might needs it!! Carbon front lip next?? 😉
Thanks! Good idea on the CF front lip... I'd be curious how long that lasts because it gets banged up!
Jake Spence
Let’s say, if you get it today, It’ll probably last the whole winter, until your next track day!! 😂 The good thing is, you won’t have to lower it much, and compensate it with thicker tires for the track!! Other than that, you’ll have to drive with some caution!! BTW, the lip I’m specifically talking about is the RZ style!!
She looks good bro keep up the good work. Your doing a great job..you should put some Pro Welds on her.
Thanks Rey! Might have to think about some new drag wheels next year...
Looks great Jake!
Thanks as always Nico!
Real great video man
Glad you enjoyed it
Looks HOT Jake!
Thanks Wayne!
Omg you're so right! I'm literally always washing the windshield by hand!
Everyday. + I have all the things in my Trunk to clean it when I'm not at home! 😂🤙🏽
Haha sounds like me before I deleted the washers.
I thought you can get the air ducts for the brakes installed on this number. The one you showed us that you didn't like is the wrong bumper (it does look ugly but it's not the correct bumper as the real 1M car).
Yes, you can retrofit brake ducts on this bumper.
It looks amazing man. Deciding myself 1m style or M5 style for my E60.
Oooo, that's a tough choice! Let me know what you decide. Would love to see it.
Yes sir!
awesome bro love that new look
Thanks man! Glad you like it as much as I do.
Jake Spence the funny thing is i found a guy close to my town that is selling a m1 bumper and a carbonfiber trunk both things for 550$
Great video, would be cool to do some nice b roll at the end showing the result better
Good idea! next time...
Sick AF!!🔥🔥🔥🤤
Thanks! 🙏
When can we see that LSD install video? I see RacingDiffs has conversion kits to convert diff.
It's coming up soon!
when are you upgrading your oil cooler
?
Looks mint
Thanks!
You can just remove the fuse for the headlight washers. It doesn't give an error code or anything like that.
Good to know, even tho a little too late lol
Guessing you had to get this painted yourself? About how much was that? And also, since they do have fog cut outs, they're actually functional and you can install the fogs yourself?
Clean! 🔥🔥🔥🔥
Glad you like it too! It really changed the look of the car.
Where did you get those headlights mate?
Nice ride, do any of the stock ducts need to be removed with the non fog light 1M replica version? I believe you alluded to only having to remove it with the fog light version..
Looks great. May I ask where you got the headlights?
beautiful mod!
Hi mate ! your 135i looks great! How is the quality of the M1 bumper? Does the painting still okey?
Quick Q: where did you source the harness bar? Bumper looks great. Mine is painted and ready for install.
Style over function 👍
Usually I'm the other way around here, but the car was begging for a new front bumper. However, I don't think it's less functional. If anything, the larger opening for the intercooler should help.
Very nice
Thanks Derek!
merci jake de faire rêver le petit français que je suis
Why you don’t sell your old bumper even if it has damage it’s still worth money. Also change the two upper grill to m sport grill
I could try listing it if someone wants it, but it can't be worth much. And do you mean the dual-slat grilles?
Jake Spence yes dual sloted grill and front lip it would look 🔥
The feder liners don't match the bottom end perfect right ?
hey man, amazing video. question, can you trim the air ducts smaller to make the bumper fit or it has to come off completely. I was thinking by only trimming it enough, you save the functionality of that
Awesome comment. Yes, I would think with some accurate trimming you could get them to work. But I haven't tried it. I might try to retrofit the OEM 1M brake ducts one day.
How did you cap the headlight washer? Or in other words with what did you cap the lines? 😅 please & thank you
I just had a box of assorted rubber caps from the auto store. I used that near the washer fluid tank and pump for the lines going to the headlights.
Jake Spence thank you so much!
Omg, i love your 135i bro. Nice job 👍
Thanks Victor!
Did you have to change the fenders to install this front bumper? Thanks!!
Hoping you can help, where did you get your headlights ☺️☺️
Did you have a code when you removed the headlight washers?
Nope!
Sick
Thanks!
That shit is fire bro❤
Haha thanks man!
Was looking at one for my 135.. I think the 1m rep bumper without the fog light holes look better. Any reason why you choose that one?
What does 135i even mean I got a 120i and I don’t even know what that means looool
Looks good man, but what about the lip or splitter?
Might get one, not sure yet.
im trying to do the same with my car im just confused if i can install and OEM 1M bumper straght to the car and not be worried about expanding the rear wide anches.. I mean for the whole bodykit..
No, OEM 1M bumpers will not fit without other fender work. The bumper I used is aftermarket and has been made to fit the 135i.
@@jake_spence Do you have a link where i can find it?
@@sundr1v3r77 yes: www.kiesmotorsports.com/products/2008-2013-bmw-e82-1-series-1m-style-front-bumper-conversion?variant=29490852986995&aff=19
Dude, do you have the headlights washer for sale
sick
😎
shere can i get headlights like that
Where did you buy headlight's?
I got them used from another 135i owner.
Hi, is this bumper original bmw or copy?
It's a copy, BMW didn't make a 1M bumper that fit the 135i.
Is this bumper quality good or not? I look for my 120d. This looks more brutal than OEM 😅 but i dont know for quality.
Is that OEM?
Light sprayers would have to come under one of the most useless inventions.. imo
Agreed!
Hell yea👌🏻
Haha thanks Jack!
What are your wheel and tire specs?
Wheels: bit.ly/2LJxkrx
Tires are 235/40/18 and 265/35/18
is this bumper compatible with the oem front fenders?
Yea.. it’s a 1M style bumper for the stock e82 body.
Yes it is.
what are the front lights?
Custom modified stock headlights.
Will that work on a 128I ?
Yes it will!
Convert the car to a 1M?
I can do my best, but it'll never be a 1M. Maybe a true OEM widebody in the future.
Just switch the Light to 0 and there are no washers 😅
Good to know, although to late now lol
Best looking 1 Series?🤔 I'd say yes!
Now that's a compliment! Thanks!
kies are great but theyre wayyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy too expensive
Sometimes you pay for what you get, and I can assure you that Kies sells high quality parts with excellent customer service!
@@jake_spence i get that but its all 3 x the price and thats just extortion
Stock looked better, you should have put a original 1m bumper and not this fog light crap...in the end its your decision yea we know it
Thanks for the comment, even if it's not your cup of tea!
Crack
Crack?!
I’m sorry but it looks ridiculous and ugly AF
you talk to much