This will be interesting to see. The trackhawk ride height allows for the front dif and axels to travel under the oil pan. While on all the awd chargers and 300’s the dif is attached to the oil pan and the driver side axel travels through the oil pan (Chrysler engineering 🙃). Also the the front driveshafts are on opposite sides which will be an issue for the transfer case. Charger and the 300 has the front driveshaft on the passenger side. These all are reasons why I think Junkyard Dave took the route he did and built a custom tube subframe. However I really hope you pull this off without going the tube subframe route.
You ever see the custom junkyard dave I think it was did? Custom srt magnum charger awd I think thing? Personally I respect the hell outta both yall for being true to what yall want, and building awesome vehicles. Mad respect from 757VA
i have a AWD 300S and i always wanted someone to try this. I know it will be a big job but it will be well worth it. 1000lbs light too compared to the jeep so this will be a rocket!
NO ONE, n i mean NO ONE build 300’s better than khal. there’s plenty of clean builds but none has that same quality that your have and that same 1 of 1 factor. can’t wait to see how this comes out.
The engine in the 300 more than likely is Hydro locked pull the spark plugs out and check most of the time. Once you get the water out change the oil engine is fine.
Not really. He's changing out all the electrical components including the wire harness. The 300 will be just a piece of frame before he actually starts putting stuff on it, so he's basically starting from scratch.
The engine is hydro locked with water in the combustion chamber, typically with flood vehicles you pull the spark plugs and fill the cylinders with wd40 or something to displace the water then work the crank back and forth then turn it over with the plugs out otherwise you’ll bend a rod
My boy back at it he changed the game with the hellcat 300 now everybody doing that then the hellaphant 300 now a awd 300 trackhawk he doing what Dodge/Chrysler scared to do let's get it
I need a pigtail for the ACTIVE SHOCK STRUT DAMPING PRESSURE SENSOR Mine got ruined taking the the motor out. If you have one lmk where to reach you at so I can purchase it from you.
That’s crazy it doesn’t turn on 🤦🏻♂️I got the same 300 mines was under the same amount of water n I started it up I got video …but definitely can’t wait too see urs done 💪🏽🫡🤘🏽💯🐐
Its all luv my dawgg take yo time no rush make sho its right & have the blue print for this build down to the T like the rest of the builds you do because you know people gone want something this done but salute though 🫡🫡🫡🫡💯💯💯💯
How's that build going? I guess great minds think alike I'm doing the same thing a 2017 chrysler to a 2018 trackhawk have u had any issues? I'd appreciate any obstacles u have encountered and what you did to mitigate it? Thanks
I am looking for a nice scat or even a r/t 2015 or up tho little damage is fine I found a few if I get a r/t I am gonna swap it later on I think it be cheaper to get the r/t body and then swap it it’s still got the dash kit and everything the hellcat does inside so seems like the better option
I wanted to do this with my rt awd magnum but I didn’t know much about cars then AND the awd system was trash. I know u be doing the shits so imma take notes and hopefully be able to do it myself someday
Let me cook..
Go ahead bro
Fr
I wish you could build a 2020 Impala into a SS 🤔, maybe a Camero swap Lt4🤷. But I love the channel bro and this build is going to be crazy 🤙
Do your Thang bro 💪 your a Beast
Cooked
This will be interesting to see. The trackhawk ride height allows for the front dif and axels to travel under the oil pan. While on all the awd chargers and 300’s the dif is attached to the oil pan and the driver side axel travels through the oil pan (Chrysler engineering 🙃). Also the the front driveshafts are on opposite sides which will be an issue for the transfer case. Charger and the 300 has the front driveshaft on the passenger side. These all are reasons why I think Junkyard Dave took the route he did and built a custom tube subframe. However I really hope you pull this off without going the tube subframe route.
As a chevy guy i appreciate your knowledge on these Mopars
Just use the 300s oil pan with hello kitty's blown power plant 😊
@@Fossillarsonthat's not possible. The 3.6 oil pan will not fit the hellcat engine.
Idk thanks :)
You ever see the custom junkyard dave I think it was did? Custom srt magnum charger awd I think thing? Personally I respect the hell outta both yall for being true to what yall want, and building awesome vehicles. Mad respect from 757VA
Bro this build is gonna be sick can’t wait to see the progress…… you are a Mopar God !!!!!!!
i have a AWD 300S and i always wanted someone to try this. I know it will be a big job but it will be well worth it. 1000lbs light too compared to the jeep so this will be a rocket!
Just when they thought they caught up my boy dropping another hit real 1 of 1 shit, keep up the bro💪🏽🤘🏽 #MichiganInTheBuilding
who else doing what bro do ? serious question cause I like watching these videos
Ngl i was looking forward to the new grand cherokee trackhawk build but this one finna be crazy 💪 🔥
Whoever wrecked the Trackhawk should never drive again.
I say this about anybody that wrecks any supercharged car
It’s a bummer to see a track hawk go away, but this is going to be one bad ass build!
NO ONE, n i mean NO ONE build 300’s better than khal. there’s plenty of clean builds but none has that same quality that your have and that same 1 of 1 factor. can’t wait to see how this comes out.
Facts bro
Looking forward to how this turns out! I prefer the 300 styling, love the idea of a newer awd Hemi version!
I did the AWD swap on the 300, it’s actually easier than you think.
If you have any questions let me know I can help.
Fr?!
Can't Wait For This Amazing Build!!!
I'm looking forward to this build.
I wonder if it’ll be possible to make this swap work in a last gen body charger, lotta retired cars out there
I'd think it would be there's a awd charger magnum 1off junkyard Dave I think did. Things now not much isn't doable either the time and talent needed
It would damn sure be awesome as hell! I'd buy 1 fast AF
Bring that trackhawk back to life after the 300 thatll be 🔥
The engine in the 300 more than likely is Hydro locked pull the spark plugs out and check most of the time. Once you get the water out change the oil engine is fine.
Interested to see the results with the placement of the axles in a charger awd vs jeep locations and how the subframe works out
YEAH HE FINNA BREAK THE INTERNET WIT THIS ONE WHEN HE DONE WATCH BRO ALL THE RAPPERS GONE WANT TO BUY THIS ONE💯
It took you long enough Bro! Evil genius back in the lab! Cant wait for this one!
Thank you for doing this! I would love my HC to be AWD
Flood car will be an electrical nightmare till the end of time, good luck!!! Will be a wicked build if it works ;)
Not really. He's changing out all the electrical components including the wire harness. The 300 will be just a piece of frame before he actually starts putting stuff on it, so he's basically starting from scratch.
Man you gotta keep at least one build and don’t sell it bro lol
BEST Channel of its kind! Hands down! 👑🔥
Question : What happened to the 1500 hp engine crate that you ordered a while back ? it said in last march they would send em out
You mean the 1000hp Hellaphant motor
@@jeffliptak9784no he means the new hellaphant motor that’s 1500 hp and 60k
My bad I don’t remember Khal saying he ordered that motor
The engine is hydro locked with water in the combustion chamber, typically with flood vehicles you pull the spark plugs and fill the cylinders with wd40 or something to displace the water then work the crank back and forth then turn it over with the plugs out otherwise you’ll bend a rod
Frankenstein 300 build 🔥🔥
Finally! AWD 300. This thing should get into the 9's.
Always wanted to see a Trackhawk AWD Hellcat/Demon in sedan form 🔥💯
Man I can't wait for the next video. I really want to see you make it work. Can you do this swap on a Magnum ?
There’s a neon green 300 in St. Louis that has a track hawk engine swap heard about three years ago seen it a couple times
This gonna be sick right here ! 💯💯💯
I thought you was looking for a track hawk to do a grand Cherokee L conversion?
I’ll be posting a video about it next week
Thanks, I'm also excited for the 300 track hawk build.
This and the trackhawk magnum going to be tuff when they drop
Why does this trackhawk look so familiar ?
I can’t wait for the finished product my bro one day I need to have a 300 hellcat
I wanna do this with a 2015 rt charger so you could get awd with the 5.7
Nah I see the vision that Jawn gone be hard 🥶🥶🥶
Man it's so relaxing watching your videos, I hope when you get elevated you'll still keep your videos 💯
You should try that with a 300m or a dodge intrepid. That would be badass
Hw much for a charger swap either scatpack or hellcat I have a v6 that runs an drive,tryna get it swap,I been watching for a while,nw I’m interested💯
Bro I swear this man does everything I can think of to be different
Can't wait to see the master at work. Always coming up with 1 of 1 builds....
Omg anotha 1 of 1 hell to the Yea my Brotha 🎉🎉🎉
This will be an interesting built...If it could be done I know you will do...Can't wait to see
This how you know Khal the king‼️
The talent of these guys is unreal.
My boy back at it he changed the game with the hellcat 300 now everybody doing that then the hellaphant 300 now a awd 300 trackhawk he doing what Dodge/Chrysler scared to do let's get it
Junkyard Dave still at it 🤦🏿♂️😭😭😭😭
I need a pigtail for the ACTIVE SHOCK STRUT DAMPING PRESSURE SENSOR Mine got ruined taking the the motor out. If you have one lmk where to reach you at so I can purchase it from you.
I have a dodge magnum in Pittsburgh I really wish you could work on it nd upgrade it
You can’t do it. This is legendary shit here. This build will make you an SRT God‼️💯
Isn’t the trackhawk awd? And if you get a 300 awd would it work?
Seeing that black Giulia makes me think, a Hellcat swapped Giulia would be insane…
You can’t use the center console from the jeep in the 300?
That’s crazy it doesn’t turn on 🤦🏻♂️I got the same 300 mines was under the same amount of water n I started it up I got video …but definitely can’t wait too see urs done 💪🏽🫡🤘🏽💯🐐
khal gone cook this watch let em do his shyt
With them wheels it’s only right to get A widebody kit on there maybe even try to reuse the widebody off the trackhawk
Bro keeps getting my dream whip like nothing
I need a trackhawk engine harness does anyone have one for sale
This gonna be a very interesting build. All for it 💪🏾💪🏾
Call me crazy but I wonder what a hellcat swapped wagoneer might sound and drive like...maybe future project 😈
What hapeen to you building 2023 trackhawk jeep
Thank you cuz I been asking for this one I need this done to my 300
You should have 1mil subscribers champ as no one is doing stuff like this. Keep grinding 😤😤😤😤
Oh yeaaa make that a strictly Track Car … Boom A New Income 🤝🏾
Can we get a wk1 08 Jeep srt8 trackhawk conversion !!!!!
Can’t wait to see the finish product you’ve made me a fan of dodge now
Can’t wait to see your new build 🔥
Its all luv my dawgg take yo time no rush make sho its right & have the blue print for this build down to the T like the rest of the builds you do because you know people gone want something this done but salute though 🫡🫡🫡🫡💯💯💯💯
At first I was looking foward for the new grand Cherokee but this is gonna be crazyyyy
That car going to be hard you always dropping some fire 🔥 💯
I thought about this not that long ago damn love to see it come to life 🙌🏼 ima have it one day as well
Bro what?!?! A AWD Hellcat!!! This about to be crazy
How's that build going? I guess great minds think alike I'm doing the same thing a 2017 chrysler to a 2018 trackhawk have u had any issues? I'd appreciate any obstacles u have encountered and what you did to mitigate it? Thanks
Never mind didn't see the other videos I subscribed I love ur content it looks crazy complicated
This nigga be cooking 🔥🔥🔥 wish I had the bread to do that shit for a living
Junk yard Dave custom built a cradle/subframe for the TrackHawk drivetrain in his magnum. He was talking about making more possibly
I am looking for a nice scat or even a r/t 2015 or up tho little damage is fine I found a few if I get a r/t I am gonna swap it later on I think it be cheaper to get the r/t body and then swap it it’s still got the dash kit and everything the hellcat does inside so seems like the better option
Love ❤️ your Cadillac Escalade-V just love it oone day i will own one!
Love your vids, should try a GM swap maybe like an ls malibu
Talk about why you can’t do the new model swaps
I wanted to do this with my rt awd magnum but I didn’t know much about cars then AND the awd system was trash. I know u be doing the shits so imma take notes and hopefully be able to do it myself someday
Any issues with the carbon fiber door inserts? I need one for my drivers side. I have a 2018
I heard you get money back for those bumpers even though they're damaged
Lil Baby gonna want this after you build it 🔥
Bro your a goat that shits bouta be insane
At 2:20, is that an aftermarket speedometer?
Do you have a trackhawk rear fascia/diffuser for sale (black trim piece that’s attached to the bumper)? Trying to put the dual tips on my WK2 SRT.
I need a motor for a 2011 Buick LaCrosse?
when the 2024 dodge charger comes do you think you can do a hellcat swap on it
Guess what the dodge demon 170s are arriving at dealerships
Can’t wait to see your build on this one fam 🔥🔥🔥🔥
Ozone generator will kill that smell when you get everything out clean it then run the ozone generator 👌🏻
This build gon be crazy
oh yeah this shit finna be hard !!! i ain’t forget bout that 2023 “trackhawk” update us
Birdman hand rub*😂👏👏👏
Redeye Trackhawk would be hard
How much value will the 300 bring will take a special buyer for that flood title car with 80k suv parts but I know you need content
I have a 2012 dodge charger sxt with paddle shifters, what u think about these cars
U should also fix that track hawk somehow after robbing all the parts u need
How much for the body of the track?