I didn't realize either because it wasn't obvious. I went in rage mode while installing this and it was barely holding on, then after few days it fell off.
Thank you a million times over for showing easy way to separate the cling window film. I had been working to no avail for over 30 minutes and I found your you tube. It is a breeze now. Thanks.
When this has been up on windows a few month - does the sunlight interact with the water making green mold? is it better to use boiled water with less contaminants?
Sorry to hear this. Just for sure, please make sure that the surface of skylight has a flat & smooth glass surface, and you remove release liner before installation. If yes, please clean up the surface of skylight fully again, reinstall with water only (No Soap), and squeegee fully without any folded corner, before or after the time of direct sunlight. We hope this works for you.
If you ask which side of film has to be installed on window, it will be the side of backing liner. After removing backing liner, install that side of film facing to the window. We hope this helps you.
To get static cling power, both film and glass surfaces have to be flat and clean. Please clean up both surfaces and install static cling film on the glass with water one more time. And please squeegee out water between film and glass thoroughly. We hope this helps you.
Sorry to hear this. Please check whether you remove liner or not before installation. If you did not remove, please remove and retry. Otherwise, please contact our customer service to cs@buydecorativefilm.com.
Sorry but, we recommend our static cling window film to be installed on the inside of window. Because it is designed to install on the inside of window.
on amazon it says to use "Soapy Water" this just says spray some water... I swear I can just never find something that pertains to my current ordeal lol
Sorry for confusion. For static cling film, both water and soapy water can be used. To easy adjust during installation, we recommend soapy water for static cling film also. Thanks for your comment.
@@Travelguru317 Does exterior window mean that the window faces outside? For reference, please click this link ( th-cam.com/video/GRSs0bh6hO4/w-d-xo.html ) to let you know where to install.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
I didn't realize the back had the film on it! This changed everything, thank you so much!
I didn't realize either because it wasn't obvious. I went in rage mode while installing this and it was barely holding on, then after few days it fell off.
Thank you a million times over for showing easy way to separate the cling window film. I had been working to no avail for over 30 minutes and I found your you tube. It is a breeze now. Thanks.
Best hack ever! Painter's tape on the corners ....... hahaha super clever! Thank you!
Glad you liked it!
Thank u... I never peel off the back sticker and suffered trying to stick it for 3days
thank you. i got some film from the internet but has no instructions. thank you for the clear video. will also visit your website after this :)
Super useful video, thank you!
Thank you sooooo muchh... this is super duper helpfull
Can it be removed and used on a different window?
Will it be easy to take off? The conventional sticker leave so much residu, and hard to take off
Easy to remove, there is no glue
Can you see from outside? What about at night when you turn on the light or off is still can see inside ?
Ashley you can see like shadows from the outside perspective on the night
Thank you so much!!!
When this has been up on windows a few month - does the sunlight interact with the water making green mold? is it better to use boiled water with less contaminants?
Jennifer Jen distilled
After proper squeegeeing, water usually will be dried up within couple of days. And you do not need to use boiled water.
Mine on the Skylight still falls off. Gonna try using shampooy water on the Glass now.
Sorry to hear this. Just for sure, please make sure that the surface of skylight has a flat & smooth glass surface, and you remove release liner before installation. If yes, please clean up the surface of skylight fully again, reinstall with water only (No Soap), and squeegee fully without any folded corner, before or after the time of direct sunlight. We hope this works for you.
TY
Will this work on frosted glass? Thanks!
If glass surface is flat, this will work. But if not, this will not.
do you put the side that the peel comes off facing the grass or the other way around?
If you ask which side of film has to be installed on window, it will be the side of backing liner. After removing backing liner, install that side of film facing to the window. We hope this helps you.
Is the static side is where you peel the clear film from? Thanks
Yes, it is.
are there any low-e benefits of using these products ?
Reflective films reduces Heat Outflow in Winter, and rejects Heat Inflow in Summer.
mine keeps rolling back at the ends, is there a way to fix that?
To get static cling power, both film and glass surfaces have to be flat and clean. Please clean up both surfaces and install static cling film on the glass with water one more time. And please squeegee out water between film and glass thoroughly. We hope this helps you.
The sides of mine are 'curved' and are peeling away from the window and I can't get it to "stick" in place. Tips?
Sorry to hear this. Please check whether you remove liner or not before installation. If you did not remove, please remove and retry. Otherwise, please contact our customer service to cs@buydecorativefilm.com.
@@BDFBuyDecorativeFilm That was it. Thanks!
So is there really need to use distilled water? If yes, don't forget to put it in the video, you can still edit it through TH-cam. ;-)
No, you do not need to use distilled water only.
after the water dry will it fall off?
No, it will not fall off after dry.
Can I put on the outside of the window? I don't want my kid to peel it off. Because I know he would.
Sorry but, we recommend our static cling window film to be installed on the inside of window. Because it is designed to install on the inside of window.
I did this today and just used regular water. Did I mess it up? Looks great but now I'm worried...
Regular water with static cling film is fine. It just makes it a little harder to install. The end result will be the same.
rs
@@BDFBuyDecorativeFilm .my roll is not wide enough can I over lap with two pieces?
on amazon it says to use "Soapy Water" this just says spray some water... I swear I can just never find something that pertains to my current ordeal lol
Sorry for confusion.
For static cling film, both water and soapy water can be used.
To easy adjust during installation, we recommend soapy water for static cling film also.
Thanks for your comment.
@@BDFBuyDecorativeFilm can I use this on the exterior window of my home
@@Travelguru317 Does exterior window mean that the window faces outside? For reference, please click this link ( th-cam.com/video/GRSs0bh6hO4/w-d-xo.html ) to let you know where to install.
@@BDFBuyDecorativeFilm I need exterior film for my double pane sliding glass door
@@BDFBuyDecorativeFilm I used to do car detailing, and we used Sunlight Dish Detergent. I am not sure if it is recommended for house windows.
5star
i am all film fitter...