gaskiya ogah you're a Big man with good heart, no one can share this illustration for free and I really learned more from you sir I pray for may allah bless and emphasize our knowledges and I can't wait to thank you sir really appreciate it
I want to thank you for your knowledge wisdom and caring heart to help teach and guide people into sewing. A person like me i only want to make garments for speciall occasions, i have no desire to make for profit but i believe every lady especially should know how to sew and her i am learning from a man with such sight, discipline, and neatness thank you boss. May the highest bless you and give you your hearts desires.
Thank you Mr tella, your tutorial have been top notch.... But pls I do have a question. Concerning how to sew a trouser with belt holders and also having a rope as well... How do we go about it.. thank you
Thank you sir.... This has been my worry all this while....why the armhole sometimes looks like that at the chest.....thank u ...i have something new to show my friends, even my boss😂
Please what really causes rumples in the shoulder region of senator?I have tried even this step it's still occuring.please can you help me out maybe I may have mistake somewhere and I don't know pls help me
Please from the video from the hem of the shirt before you do the shoulder slop I can see the back is longer than the from. Please can you explain that point. Thank
Thanks for the upload. Please, on the armhole area when you measure 9 inches downward, and you use hand free curve inside. What should be the measurements inside curve,? Is it okay to measure 1.5 inches from that 9 inches to do the curve.
Please sir what mea8or calculation do u use for the folding of the sleeve before cutting of the arm to get you arm circumference perfect as ur arm hole
Well done sir, u don't let us to now the measurement of breath and width of the fabric u used to cut the short sleeve. It is a problem for some many tailors.
If the arm hole is 9, what will be d sleeve folding depth.... Not the length or the 6 inches depth o..do u add 2,3 or 4 inch to get the side of the sleeve
@@SewingWorkshops hi boss. 👍 when you said it should be 1/2 inch instead 1inch where is it from? From the beginning before you ironed the fabric armhole or is it when you drew the sleeve . I made some lovely shirts in the past but I used some “Einstein” formulations. Btw thank to your videos about trousers I made a lovely purple tartan fitted trousers. You’re the best . This is why I’m calling you Boss🙏🥰
@@BJP1973LEEDS after slanting the shoulder by 2.5 or 3 inches and drawing the front panel down. You make the back panel overlap the front panel by 1/2 inches. I hope you get
You are a good man with good heart. Not everyone will do this for free
I envy the way you mark without ruler, that's to show ur indeed a Prof😂
I love it!
gaskiya ogah you're a Big man with good heart, no one can share this illustration for free and I really learned more from you sir I pray for may allah bless and emphasize our knowledges and I can't wait to thank you sir really appreciate it
Thanks for sharing. Not everyone will do this for free. This is a secret one would have to pay a certain amount of money to learn
I want to thank you for your knowledge wisdom and caring heart to help teach and guide people into sewing. A person like me i only want to make garments for speciall occasions, i have no desire to make for profit but i believe every lady especially should know how to sew and her i am learning from a man with such sight, discipline, and neatness thank you boss. May the highest bless you and give you your hearts desires.
Thanks for sharing.
I love your illustration.
It's simple and easy to understand.
A good arm whole is the hardest part to me a a designer, but I've gotten better over the years. This was a good post.
I watched the one you uploaded last week. I cut some fabric on weekend and I could see the difference.
Keep up the good work.
I'm glad it helps
I really love this tutorial.....this has been my problem,my dad always complain about the problem😅😅 but with this tutorial I guess I'm good to gi
A very big thanks to you brother for clearing many people's doubts , more GRACE upon you to do exploit...
God bless you so much for sharing this knowledge on sleeve and armhole cutting... Thank you sir
My first time watching ur video nd I like d way u explain tings perfect nd d way u make things easier❤
Thanks very much. It's so helpful and simple way to make it fitted.
Thank you so much sir, your tutorials have always been a great asset for me
Nice job more grace n may the lord continue to bless the work of ur hands in the name of Jesus Christ. Thanks much appreciated.
Thank you very much sir, you've solved part of my problem in men wears❤
Very straight forward and detailed. Many thanks boss 💯✔️
Thank you for your video, it was helpful to me 🙏😊
Boss thanks allot for the understanding 🙏🙏, have been trying to get this video long time ago.... Love you 😘😘😘😘
I love how professionals free hand everything. Can’t wait to get to that point one day 😂
U will surely get there
Love watching this! Good job.
I love yr illustration
Thank you Mr tella, your tutorial have been top notch.... But pls I do have a question. Concerning how to sew a trouser with belt holders and also having a rope as well... How do we go about it.. thank you
Thank you sir....
This has been my worry all this while....why the armhole sometimes looks like that at the chest.....thank u
...i have something new to show my friends, even my boss😂
💪
May God bless you abundantly
So educative
God bless you for this
You welcome
Thank you boss
God bless you endlessly
You are welcome
@@SewingWorkshops plz sir I need ur contact
Thanks for this simple tutorial. Keep up the good works
Wonderful I will try this pattern thank u ...
Please what really causes rumples in the shoulder region of senator?I have tried even this step it's still occuring.please can you help me out maybe I may have mistake somewhere and I don't know pls help me
Simple to comprehend, many thanks
You welcome
sir to slant the back how many inch do u used
Pls sir,how do I fix it in a senator top already sewn?
What was the length of the fabric you cut for the hand before cutting the arm hole?
God bless you boss. Pls I need your perfect shirt cutting
If its longsleeve , will the half inch cut fall within the right and left sleeve
Please how many inches do you add to the back which is longer than the front please
Thank you so much sir for it's dose give me problems but I'm sure now l will try and do better as well may God add you more wisdom thanks pleased.
You are welcome
Thanks for sharing, God bless,I will try it out
Sir pls what can cause squeeze on the shoulder
Thank you for this content.
Please from the video from the hem of the shirt before you do the shoulder slop I can see the back is longer than the from.
Please can you explain that point. Thank
After cutting the little out of the front of the main native, does it reduce the allowance of the chest?
Just came accross this. Thanks. I thought you would mention how to get a sleeve widenedss when you wanted to cut that sleeve.
Thanks for the upload. Please, on the armhole area when you measure 9 inches downward, and you use hand free curve inside. What should be the measurements inside curve,? Is it okay to measure 1.5 inches from that 9 inches to do the curve.
Pls is the overlap 1inch or half inch please
God bless you sir
Is this the same way to cut female senator.
How did you get the width of the sleeves
How many inches did u fold the sleeves ? Was it chest divided by 4?
Thanks for the tutorial. But concerning the 5 inches which you removed from the sleeve, isn't it much?
I was taught to remove 2½ inches
Won't the shoulder drop too much on 3 inches
Thank you for teaching me
Thanks so much
Please for the price of this machine🙏🙏
Please if you say shoulder measurement mean from shoulder to shoulder?
And is this method only for men cloth or for women also
Thank you so much you are the best 🥰
how can I join the body by using this particular method..cause it difficult for me when joining the bodies.. the sleeve will pass each other.🤦
Buenos dìaz, felicitaciones res todo un genio, quiero hacer la camisa azul, b endiciones.
Very helpful, thanks
So it means the five inch is constant for any size.
You are soo good sir
Thanks
Wonderful brother
Hey thanks for your tutorial but have aproblem with sleeve and cuffs can u plz hely
Ok
@@SewingWorkshops thanks
I love this
Please sir what mea8or calculation do u use for the folding of the sleeve before cutting of the arm to get you arm circumference perfect as ur arm hole
Measurement
Well done sir, u don't let us to now the measurement of breath and width of the fabric u used to cut the short sleeve. It is a problem for some many tailors.
How can I join your class on internet and get some paperwork
How will you cut a sleeve to be straight
Wow you are the best of the best
Thanks for watching
If the arm hole is 9, what will be d sleeve folding depth.... Not the length or the 6 inches depth o..do u add 2,3 or 4 inch to get the side of the sleeve
9-1.5=7.5, fold @ 7.5
Please sir the overlap can I do it half inch or is false to do it 1inch
1/2 inches not 1 inches.. He made a mistake
Thank you ❤️
Good bless you sir
Please sir can you show us how to tream senator after before complete sewing
Please sir what about a kid . the same 1 inch or
Hello My brother hope you are fine am also fine l want to get some paperwork and how can I contact to you on internet
Genius 👍
Make sense
It worked pamm
Please boss. Do you have a tutorial on how to cut a male trouser?
Yes check the channel videos
The 3 inches you removed from the shoulder isn't much because I was taught to remove 2 and why did you fold it before cutting
When you folded then upper part the one you ironed...why didn't you fold it to be symmetrical?
Thank you for sharing what known
I'm in love of your tuitoria. Can we have direct contact?
It’s works perfectly .... but please is it important for the shoulder to overlap the front ???please need answers
I'm glad it helps
Yes it important for the shoulder to overlap.. the 1inch overlap is you SA
Yes
Well explained.
Thank you so much
Thanks so much
Perfect 👍
Thank you so much boss
Wow, is this arm hole cutting applicable to short sleeve shirt?
Yes it is
@@SewingWorkshops alright thank you
Thank you.
My arm hole change for better as i watch the video tsnk u
please sir can you do same video for shirt
I think the short part of the sleeve will be sewn to the back not the front, going by your final statement. They compensate each other.
No the short part will be sewn to the short side
Wow thank you bro.
Please sir.... Why is the back part of the body overlapping the front one by one inch
The 1 inch is the SA
Thankyou
Sorry it supposed to be half inch not 1inch I made a mistake
@@SewingWorkshops hi boss. 👍 when you said it should be 1/2 inch instead 1inch where is it from? From the beginning before you ironed the fabric armhole or is it when you drew the sleeve . I made some lovely shirts in the past but I used some “Einstein” formulations. Btw thank to your videos about trousers I made a lovely purple tartan fitted trousers. You’re the best . This is why I’m calling you Boss🙏🥰
@@BJP1973LEEDS after slanting the shoulder by 2.5 or 3 inches and drawing the front panel down. You make the back panel overlap the front panel by 1/2 inches. I hope you get
God bless you boss
You are welcome
Will give this a try
I want that painting
You got it dear
Thanks boss ❤