Greeetings from Mexico. Didn´t understand a word but he´s the only one who actually shows every single part and detail of the system so "Tenga su like buen hombre"
Nice video, you should prepare part -2 of the pump room... And explain in it the testing and balancing of Jockey, Electric and Diesel pump pressure... similarly why we have installed Flow meter in the test line etc... Why we are using PRV and how to set its out pressure etc...
Thankyou sir.....really your videos are very very helpful for study and understanding of FIRE PROTECTION ENGINEERING....through this my maximum doubts about Operation of all system are very much clear.......
I saw many videos of yours, please share some videos for designing for High velocity and medium velocity sprinkler system and gas suppression system , how can we design , what is the pipe size , nozzle size , gas bottle size and all, Thanks in advance
Very Informative video but sir ap is video ma yeh btana bhool gye k jockey discharge line ma NRV b hota hy.. And pump testing k lye phly disharge line ko bnd zror kiya jata hy ta k pressure sy koi sprinkler ya copling sy leakage na ho. Thanx ap ki video sy bht kch seekhny ko mila
very nice video sir.. You explained everything in so detail and easy to understand. I was searching this kind of tutorial video in youtube and I have found it here. Thank you for your support sir.
Very informative ...thoda aur technical banaye (part 2) matlab tank size, pump size, stater panel kaon sa hai aur suction, discharge pipe dia, fire alarm ka connection kaha kaha hota hai...baki sab changa si.
I like to learn more about fire protection but i can't understand what you're talking. but still thank you for sharing this. greetings from Philippines
I saw familiar same logo on the electrical panels and the diesel engine. same vms jockey electric and diesel setup, is that a 1250 gpm 150mm suction hsc pump? Of course i've seen mcv near the header... nice vid... keep it up. 👍👍👍
Sir , Why the breeching inlet will not fill the tank instead of filling to the circuit...From India thanks a lot for the video it's very useful....Jazzaq Allah
My two videos are available further will be prepared Insha'Allah. If you need pdf then then join my Telegram group and its link is given in each videos' description
Very informative video. Just a doubt . Jockey is used in case of minor leakage and diesel pump in case of power failure. When is electric pump used. And in case of actual fire are all pump working or not???
Thanks 😊. Just wanted to know is there any std pressure for pumps to run(below certain level jockey pump and electric pump) . Or thus it change from project to project.
Pump pressure change & depend on pump head pressure and maximum pump pressure not increase 300psi as per NPFA and if increase pressure then an other pump zone to be installed
Dear sir, I saw some of faults; -Pressure sensing line shall be stainless steel or copper -The suction pipe shall be 10D straight pipe -There shouldnt be any strainer on the suction pipe, you can put strainer to the water tank filling pipe.
Tanveer bhai fire fighting system hr time pressurised rehta hy to ye kitny pressure py rakhty hain . Or sprinkler k discharge py kitna pressure hota hota hy
Kindly watch my different videos of fire fighting then may be understood in detail. Normally at sprinkler pipe side we set 5 bars and sprinkler discharge pressure is 1 to 1.5 bars but depend on k-factor of sprinkler
Dear sir, Thanks for posting such detailed educational video. Keep going... For your kind information, i found at timeline 14:33 that the breeching inlet line is provided with check valve and a OS& Y valve.. As per NFPA 14 - 2016 edition. Point 6.3.6.1.1 control valve shall not be required... And as per manufacturer the check valve shall be permitted to install in vertical with upward flow direction only... Please review this and post your reply.. Thanks.
Because exhaust temperature is high and in grooved fitting has plastic seal which will be melt and then leakage of smoke as well as sound will observed
Fire Hydrant Fire Pump Room: th-cam.com/video/tIIzVkgjJvQ/w-d-xo.html
i want to meet you pls location
Greeetings from Mexico. Didn´t understand a word but he´s the only one who actually shows every single part and detail of the system so "Tenga su like buen hombre"
Thanks Sir, my aim to promote my field work in local language
Nice video, you should prepare part -2 of the pump room... And explain in it the testing and balancing of Jockey, Electric and Diesel pump pressure... similarly why we have installed Flow meter in the test line etc... Why we are using PRV and how to set its out pressure etc...
Ok noted, I will insha'Allah
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Bahut acchi Tarah Se samjhaye Shroff ne very good
Thanks
Absolutely detailed real time video demonstration of FF pump system. Great work🤝👌👏
Thank you
Amazing insight Tanner Ahmed Sahab, detailed information
JazakaAllah
MashaAllah tanveer bhai acha explain kiya aapne
Thanks
Thankyou sir.....really your videos are very very helpful for study and understanding of FIRE PROTECTION ENGINEERING....through this my maximum doubts about Operation of all system are very much clear.......
Thank you too for like my videos
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Tanveer sir app bahut achhe se video banate hai
Thanks Mr. Yasir Alam
this video is very iformative..your explanation is very good and anybody can understand..thank you very much sir for your great effort....
Welcome
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Assalamu alaikum sir masha allah bahot khub bahot acha samjhme aya
W.Salam, and Thanks
Very nice explanation about fire fighting.
.i already watch your BMS Part-1 & bms part-2 video...sir kindly made the video of BMS part-3..thanks
Thanks....I will
th-cam.com/video/twwbAngCtpg/w-d-xo.html
..
MashAllah Tanveer sir bht informative video tha..
الحمدللہ رب العالمین
A big THANKYOU for this amazing video.
Welcome
Well done
Good Presentation
Informative
Thanks for sharing the video
Welcome
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Mashallah Tanveer Bhai it's very usefull videos thanks a lot for giving information ..plz keep in touch n upload new videos
Thanks 😊, I will continuous... insha'Allah
th-cam.com/video/twwbAngCtpg/w-d-xo.html
I saw many videos of yours, please share some videos for designing for High velocity and medium velocity sprinkler system and gas suppression system , how can we design , what is the pipe size , nozzle size , gas bottle size and all, Thanks in advance
Okay noted
Bahut khoob pasand aaya sir jee
Thanks
bhai, bohot achcha huya. Maa shaa Allah
JazakaAllah
It is very useful video.Thanks alot for making such awesome video. Hope you will give more information about it.
Thank you Shahid
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Very Informative video but sir ap is video ma yeh btana bhool gye k jockey discharge line ma NRV b hota hy.. And pump testing k lye phly disharge line ko bnd zror kiya jata hy ta k pressure sy koi sprinkler ya copling sy leakage na ho. Thanx ap ki video sy bht kch seekhny ko mila
Right & thanks
very nice video sir.. You explained everything in so detail and easy to understand. I was searching this kind of tutorial video in youtube and I have found it here. Thank you for your support sir.
Welcome
Informative n very Good work 👍
Keep it up
Thank you
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Very informative ...thoda aur technical banaye (part 2) matlab tank size, pump size, stater panel kaon sa hai aur suction, discharge pipe dia, fire alarm ka connection kaha kaha hota hai...baki sab changa si.
Thanks
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Excellent brother. 100% accurate practical demo. If possible make one videos on total flooding system also if possible.
Ok thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Bahot khoob sir good explanation
Thanks
Very balanced information regarding FFP।
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Great video , there is no such great video on youtube like this about fire pump room. your other videos also great.
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Bahut accha bataya hai...grt
Thanks
Sir bahut acha video banaya hai. koi multistage pumps ka video bhee banaeyea ya 100 m hight ke building ka.
Ok noted
I like to learn more about fire protection but i can't understand what you're talking. but still thank you for sharing this. greetings from Philippines
Thanks, This is Urdu language therefore you are not understanding
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Thanks sir jankar dene k liye💐
Welcome
Great Thanks for uploading this kind of videos 👍👍👌👌👋👋💐💐🌷🌷❤❤
Welcome
Very nicely explained. Thanks you sir for your efforts from India
Welcome
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Very useful video!
Thanks
Such a good information with proper equipment...great video from knowledge wise and presentation both....
May I know,where are you working now?
Thanks ... Karachi, Pakistan
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Very Very Good Information Sir
Thanks
very nice. well elaborated! jazakAllah
Thank you
Well tried and nicely explained. Jazakallah.
Thanks
It is very useful video with good explanation Thanks a lot Sir
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Very good information with actual operations.
Thanks
@@TanweerAhmed sensing k bara me explain pls ??
I will upload soon fire pump sensing lining detail as per NFPA
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Thank you very much bhai. Very valuable information...🙏
Welcome
Very good video. Please explain how this pipe sizes are selected.
Thanks...I will upload soon about pipe size
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
👍👍👍👍 from india
Thanks
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Amazing Tanweer bhai .thanks
Welcome
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Please make lecture step by step. It would help for beginners
Thanks and noted
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
very wonderful message sir.more vedio imme
Thank you
I saw familiar same logo on the electrical panels and the diesel engine. same vms jockey electric and diesel setup, is that a 1250 gpm 150mm suction hsc pump? Of course i've seen mcv near the header... nice vid... keep it up. 👍👍👍
1000gpm and pipe dia 150mm...Thanks for like this
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Great video sir
Thanks
Very nice video sir 👍 sir control panals par bhe video bnay thanks.
Now a days our project work is off due to lockdown, when it will be start then will make a video and explain accordingly
@@TanweerAhmed ok Thanks alot sir
Bht badiya
🙏
Very useful video. Thanks
JazakaAllah Khair
Very good explained
Thanks
Sir , Why the breeching inlet will not fill the tank instead of filling to the circuit...From India thanks a lot for the video it's very useful....Jazzaq Allah
Because pumper (fire bridge vehicle) has their pump in vehicle.
Well information.
Mera ek sawal hai ki pump room se building me ek supply jati hai to kya building se wapas pump room me return line aati hai?
Thanks, return line nahi aati hai
Good work Bhai
Thank you
best one as always..superb
Thanks
Very useful sirji
Thanks
nice working sir...with easy explain, we know how many time and hard working required for making such videos.. thank you so much
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
.
Also provide some interviewer questions for fire fighting project
My two videos are available further will be prepared Insha'Allah. If you need pdf then then join my Telegram group and its link is given in each videos' description
It's very useful video
Thanks for 👍
Great
Video Bro
Thank you for appreciation 😊
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Very informative video. Just a doubt . Jockey is used in case of minor leakage and diesel pump in case of power failure. When is electric pump used. And in case of actual fire are all pump working or not???
In case 🔥 fire then jockey & main electric pump will auto run and if no power available then Diesel pump manual run
Thanks 😊. Just wanted to know is there any std pressure for pumps to run(below certain level jockey pump and electric pump) . Or thus it change from project to project.
Pump pressure change & depend on pump head pressure and maximum pump pressure not increase 300psi as per NPFA and if increase pressure then an other pump zone to be installed
Jockey pressure should be 10psi greater than main electric pump
Nice video 👍 and very informative Thanks Sir.
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Mashallah Zaberdust ..
Thanks dear
Dear sir,
I saw some of faults;
-Pressure sensing line shall be stainless steel or copper
-The suction pipe shall be 10D straight pipe
-There shouldnt be any strainer on the suction pipe, you can put strainer to the water tank filling pipe.
Agreed
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Nice presentation 👏
Thanks
great job ❤
JazakaAllah
Very good brother keep it up.
Tank you Tariq khan
@@TanweerAhmed welcome sir
Very useful video 👍,
Thanks & good job,
"Sv "
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Nice video sir thanks 🤗
Welcome
Excellent video mashaallah
Thank you
Thank you sir for this video
Welcome
Sir very good... Fire extinguisher ke baren mein bhi batao plz
Thanks. One my video available on fire extinguisher
@@TanweerAhmed ok sir
@@TanweerAhmed sir Aapke fire se related notes Chahiye.....plz
My articles are available on my website and other notes are required which are belong to someone else then share email
It's very helpful
Thanks
Excellent👍
Thank you
@@TanweerAhmed which types of transducer use there?
Tanveer bhai fire fighting system hr time pressurised rehta hy to ye kitny pressure py rakhty hain . Or sprinkler k discharge py kitna pressure hota hota hy
Kindly watch my different videos of fire fighting then may be understood in detail. Normally at sprinkler pipe side we set 5 bars and sprinkler discharge pressure is 1 to 1.5 bars but depend on k-factor of sprinkler
Thank you very much sir❤❤
Thank you
Good video. Very systematic
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer...
Well explained sir and can you explain cut in and cut off for all pumps?
Watch my video "fire pump setting" for cut in and cut off for all pumps
th-cam.com/video/WdjfAHqO2Gk/w-d-xo.html
Adis - industrial safety management (ISM) Question paper and answer..
Thank you sir information dene ke liye
Welcome
Jazakallah bhai
Thanks
It's Well informative with good presentation.
Thanks
Dear sir,
Thanks for posting such detailed educational video. Keep going...
For your kind information, i found at timeline 14:33 that the breeching inlet line is provided with check valve and a OS& Y valve..
As per NFPA 14 - 2016 edition. Point 6.3.6.1.1 control valve shall not be required...
And as per manufacturer the check valve shall be permitted to install in vertical with upward flow direction only...
Please review this and post your reply..
Thanks.
You are right
@@TanweerAhmed can you please explain why flanged fittings only used and grooved fitting are not used in diesel engine exhaust pipe...
Because exhaust temperature is high and in grooved fitting has plastic seal which will be melt and then leakage of smoke as well as sound will observed
@@TanweerAhmed
Well noted, very informative. Thanks
@@frilwan6522 Welcome
Very nicely explained. Thanks
Thanks
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Thankzz...👍
Welcome
Nicely explained 👌
Thanks
Mashaallah nice video ,I have a question .how long pump should be run
Depends on fire 🔥
@@TanweerAhmed I mean ,when we installed fire pumps it's should be on always 24/7
Great Sir☺️
Thanks
I am your new subscriber
Really very useful information
Thank you #Tanveerbhai
Welcome
th-cam.com/video/twwbAngCtpg/w-d-xo.html
Nice explain sir
Welcome
Thank you sir for the detailed explanation
Welcome
masallah nice video
Alhamdullah
Hi Mr.Tanweer Ahmed pls do make video of storage sprinkler system ( like ware house ) rack sprinkler arrangements,supply to that rack sprinklers.
Insha'Allah
Nice explain sir..
Thanks
Tanveer vai i want to next video. How operate fire electric pump, Diesel pump and jockey pump.
Ok noted and thanks
Supb sir thank you very much
Welcome
Great video brother.. Transfer pump is also installed in the fire pump room ?
Thanks. Yes both are installed in same room
@@TanweerAhmed brother, transfer pump and fire pump tanks are different ?
Both types pumps can be connected by single tank and can be connected by separate tanks
@@TanweerAhmed brother, what is the difference between hydrant and sprinkler pump ?
No difference
Thanks for the subtitles
Welcome, I have added subtitles on other videos also and my aim is to addition subtitles on all my videos.
@@TanweerAhmed thank you sir, i will surely watch those too.
Welcome
Nice explained sir..
R u fire protection engineer, sir?
Thanks, I am Mechanical Engineer
th-cam.com/video/twwbAngCtpg/w-d-xo.html