Another brilliant video from you--I was struggling with getting the air filter assembly out!!--the owners handbook simply says "REMOVE" !!!! Just bought a 400 today--my first big scoot--and each one of your videos has been very instructive---I've just spent 5 hours on it after a long day driving to collect it--and like to know how it ticks--it needs a new air filter assembly--I reckon its NEVER been changed in 11 years--but fortunately low miles and uk atmosphere --so not too dusty.
This really helped me a lot. Except for dropping one of those plastic screws in the chassis it went great. It was easy! Thanks again. ( I hope I can get the screw out.)
@@MicBergsma I drained the tank and replaced the gas with some fuel conditioner, new battery, new spark plug and sprayed some sea foam cleaner/lube into the muffler, sure sounds like she wants to turn over, but doesn’t
Is there anybody who knows how to change O2 sensor on burgman? One side of the wire goes to the exhaust pipe but where's the second one? is it under the seat? i'll be very grateful for any help guys...
THANKS BUT ON EARLIER YEARS IT IS MORE DIFFICULT TO REMOVE THE AIR CLEANER..THE BACK REAR SCREW IS VERY HARD TO SEE OR REMOVE AND I WOND UP TALKING THE WHOLE BACK OF THE SCOOTER OFF TO FIND IT..(A REAL DESIGN FLAW AND PAIN ) THANKS SUZUKI ..!
Hey man, thanks for all the useful and entertaining videos you posted..i need your help over an information: do you know if the Burgman 400 K1 , have the air filter in the same position? I know that the filter for this model, is a simple very light pad, but i don't know where is located. I can't find any video here, about my specific"old" Burgaman's model, therefore if you may help me on this, it will be highly appreciate it. Thanks in advance.
![[LIVE] : ONE ลุมพินี 90 | คู่เอก "ก้องไกล vs แอนตาร์"](http://i.ytimg.com/vi/VugIvOstzRI/mqdefault.jpg)
I just picked up a 2008 AN400, lucked onto your channel. Your videos are the BEST!!!
Thanks Mitch. Washing my filthy filter now, ordered a new one and reinstalling when this one is dry.
JPTill, I am going to post install air filter tonight, it's piece a cake and took me a few seconds.
I wonder if you are keeping track of the comments, but anyways: this video is gold , man! Nicely done, no bs, work. Thanks!
once again mike, ur the maaan!!!! ur vids have probably saved me a couple of tjousands of dlls. thx dude
Another brilliant video from you--I was struggling with getting the air filter assembly out!!--the owners handbook simply says "REMOVE" !!!! Just bought a 400 today--my first big scoot--and each one of your videos has been very instructive---I've just spent 5 hours on it after a long day driving to collect it--and like to know how it ticks--it needs a new air filter assembly--I reckon its NEVER been changed in 11 years--but fortunately low miles and uk atmosphere --so not too dusty.
Watching this made me wonder if there are any recommendations for where to get a good replacement gas strut for the seat?
This really helped me a lot. Except for dropping one of those plastic screws in the chassis it went great. It was easy! Thanks again. ( I hope I can get the screw out.)
With your video I could replace the air filter, I’m jus wondering where I can find the 2 screw clips for the cover , I couldn’t find the part number
Your welcome!
I don't know what I would do with out your helpful videos on how to work on 07 Bergman 400cc
please can you help me with an online shopping link that i can buy my spare parts from
once shin again!!! ur the maaaaan. ur vids have saved me a couple of thousands of dlls maaan, thx!!!
Thank you bro, I spent half of hour to understand how to remove this filter, lol.
Quelle est la cause du non fonctionnement des signaux
I have a k&n in filter in mine burgman 400 2013 . I would like to know is it possible to run a cold air air filter???
Can I spray starter fluid in there to get my scooter started?
No it is not carburetor… burgman has EFI, so can’t spray in there
@@MicBergsma it’s been sitting for two years, what do you recommend
@@imurphy6410 new battery, spark plug, pour some sea foam in gas tank
@@MicBergsma I drained the tank and replaced the gas with some fuel conditioner, new battery, new spark plug and sprayed some sea foam cleaner/lube into the muffler, sure sounds like she wants to turn over, but doesn’t
Put in some new gas, with added fuel conditioner. Always ran fine before, never had an issue.
Thank you so much for some guidance
Thanks again for one of your useful videos!
Burgman 125 ???
Is there anybody who knows how to change O2 sensor on burgman? One side of the wire goes to the exhaust pipe but where's the second one? is it under the seat? i'll be very grateful for any help guys...
Now let's see you put it back in. After several hundred attempts, I can't get the three tabs in all the way.
awesome video.
THANKS BUT ON EARLIER YEARS IT IS MORE DIFFICULT TO REMOVE THE AIR CLEANER..THE BACK REAR SCREW IS VERY HARD TO SEE OR REMOVE AND I WOND UP TALKING THE WHOLE BACK OF THE SCOOTER OFF TO FIND IT..(A REAL DESIGN FLAW AND PAIN ) THANKS SUZUKI ..!
How the hell do you get the filter out so easily I’m losing my mind right now?
by keeping the filter in the upper lid when removing. hold the filter up into the lid.
Looks way different than my 03 400 burgy. Weird
وكي
Hey man, thanks for all the useful and entertaining videos you posted..i need your help over an information: do you know if the Burgman 400 K1 , have the air filter in the same position? I know that the filter for this model, is a simple very light pad, but i don't know where is located. I can't find any video here, about my specific"old" Burgaman's model, therefore if you may help me on this, it will be highly appreciate it. Thanks in advance.