Don't forget to use the promo code: jwmontoya at ryansdieselservice.com/ to get 5% off Also, check out the turbo on my LLY here: th-cam.com/video/vb2KArg3TrQ/w-d-xo.html
Hey man did you just have a stock pump and injectors? I’m doing a 10m cp3 swap with high flow piping kit and would like to do injectors down the road but stock sticks can’t decide between a 64 vs 66 turbo? Can you help me out since you ran it? Thanks
Need to invest in a Foldable Topside Creeper. Makes working under the hood more pleasant and less painful. You can extend it for higher vehicles or lower.
Hey I been looking for this video. I just installed this fleece rear engine coolant cover on my truck you don't remember how the coolant lines ran do you? The 2 off the firewall 1 goes to the middle of the engine like infront of the turbo and the other goes to the left like near the coolant refill tank...but there's 2 other lines I can't figure out how to tie in
Gunna go zone with fox rear shocks and the fox coils for the front with the upgraded heavy duty UCA. Too bad McGaughys doesn't make a lift for a ram 1500 🤦🏽♂️
@@JWMontoya plan on doing cp3 sportsman or 10mm exergy currently running ppei highest tune 200hp I know will have to be retuned just trying to get a power difference between the 2 not really a lot of info on the 64vs66
@@christopherlynch7654what did you end up going with? I was going to do the RDS 66 on my 16’ Denali but it’s one of my work trucks so I got a RDS 64 coming early next week. I run mainly a 150hp over tune but might turn it down after the turbo.
Love the videos man! Awesome content, question for you. I want to get this same turbo setup but pretty much everything on my truck is stock, like stock injectors, stock trans, I have bigger tires and wheels and lift but nothing too crazy. I love the sound of this beast, just don’t want to drop the 66mm in their and risk damaging anything. I don’t hot dog it or goose the throttle too much. Thoughts?
@JW Montoya I want to install this turbo, what is all you needed and how much did it cost for everything, also is there anyway I could get the tune you had and put it on my efi live scanner? I'm really interested in doing this any help would be appreciated thank you
Don't forget to use the promo code: jwmontoya at ryansdieselservice.com/ to get 5% off
Also, check out the turbo on my LLY here: th-cam.com/video/vb2KArg3TrQ/w-d-xo.html
I’m in Cali and want to get an lml Denali or the l5p but don’t want to risk getting messed with by deleting. Thinking lbz or lmm maybe lly
Hey man did you just have a stock pump and injectors? I’m doing a 10m cp3 swap with high flow piping kit and would like to do injectors down the road but stock sticks can’t decide between a 64 vs 66 turbo? Can you help me out since you ran it? Thanks
I need them headlights where did you get them?
And... now I REALLY want a duramax namely a LML! Watching you and Jack’s Channels is really fueling my desire to get one!
LLY's with a 6 speed swap are the hot ticket
I love when you said “put it in the Ford” aka trash can
Sounds great! I almost didn't make it through the first 5 minutes and last five, but glad I stuck around.
I'm in love with how your truck sounds now with that turbo upgrade😍😍. Sounds sooo good!!
Just did my down pipe. Took me 1hr. Took out the pass side fender and had easy access 👍👍
It sounds awesome now I have to do a down pipe and 66 turbo to my lml
Need to invest in a Foldable Topside Creeper. Makes working under the hood more pleasant and less painful. You can extend it for higher vehicles or lower.
I told myself I would after doing my turbo on the LLY lol
I love how he said put it in the ford 😂
Well yeah
On god
What’s that computer screen thing that tells you the codes. I could use one for my truck . Just bought a 2500hd 2011 Chevy so I needs that homie 🤙🏻
Man I love your front bumper is that an aftermarket if it is please tell me where can I get one
Sounds exactly like a straight piped 7.3. I like the vgt more
Where are your headlights from? They look sick!
Hey I been looking for this video. I just installed this fleece rear engine coolant cover on my truck you don't remember how the coolant lines ran do you? The 2 off the firewall 1 goes to the middle of the engine like infront of the turbo and the other goes to the left like near the coolant refill tank...but there's 2 other lines I can't figure out how to tie in
You were able to remove the turbo with the y bridge in place??
Where u get headlights and fog light have the same truck and love the ones u have
3 days?! Whats diff about the duramax? No space in the engine bay or something? Ive only done them on a 6.0 and 6.4, both took about 1 night
Getting off at 5:30 and working on it until 9ish day so yeah it took 3 “day”
Dude that whistle is sick
8:49 what is the orange dash light above the security light on that truck?
Gunna go zone with fox rear shocks and the fox coils for the front with the upgraded heavy duty UCA. Too bad McGaughys doesn't make a lift for a ram 1500 🤦🏽♂️
Yo jw any update on getting a new cluster for the lly would be a cool video
That turbo sound 🤤
Where did u get that front bumper?
Where can I get custom tunes and which tuner to get I have a 18 gmc 3500
Where did u get custom tune from ?
1st run with the low power makes me think someone forgot to hook a charged air cooler tube back up 🤪
It's like driving a 5 mile an hour jet.
Love the channel JW. When’s “cam with the Ram” getting a diesel. Can get that cummins and build it man. Would love to see some content on that.
I know this is about a year later but debating a 64-66 or compound how was the power difference compared to the 64mm
64mm if you plan on keeping stock fueling
@@JWMontoya plan on doing cp3 sportsman or 10mm exergy currently running ppei highest tune 200hp I know will have to be retuned just trying to get a power difference between the 2 not really a lot of info on the 64vs66
@@christopherlynch7654what did you end up going with? I was going to do the RDS 66 on my 16’ Denali but it’s one of my work trucks so I got a RDS 64 coming early next week. I run mainly a 150hp over tune but might turn it down after the turbo.
Love the videos man! Awesome content, question for you. I want to get this same turbo setup but pretty much everything on my truck is stock, like stock injectors, stock trans, I have bigger tires and wheels and lift but nothing too crazy. I love the sound of this beast, just don’t want to drop the 66mm in their and risk damaging anything. I don’t hot dog it or goose the throttle too much. Thoughts?
Ryan at RDS said 66mm is the biggest turbo he would recommend for stock fueling. I didn’t think it was laggy at all once I got a revision
@@JWMontoya you are the man thanks for replaying!
What's the song in the beginning called?
those headlight tho bro link to them would be great lol
What headlights are those?
Well....I only have 1 ride so I'm thinking I need to just go to a shop where people know what they are doing 😂
Sounds good man and the truck looks amazing too
What is that plug called
Keep doing these videos....I'm trying to learn some things from you
Lift pump wiring looks solid 😂
Dope.. can’t wait to upgrade mine 😈😈
i did the same turbo but bit the cp3 should i retune? i feel the truck sluggish
You need to retune after cp3
what kind of front bumper is that, very nice
Flog industries
Where do you work at champ?
What front bumper is that
Need to know this, that’s sexy
Bro that like sub intro caught me off guard 😂 I’m subbing because of that
Is this thing egr deleted?
I seen you and your boys the other day on 20. I was the green Freightliner that blew air horn and confused you lol
Is your trans stock in the lly and the lml or are they built?
All stock. Planning on getting it rebuilt once it starts to slip
Bro! What headlights are those!?
Alpharex headlights 🤟
Hi gays i where can i find like thes head light
Have you regear your gear ratio from stock?
Nope
Should have went Non-VGT! Not a fan of the VGT turbos. Still sounds good though man! I run an S472/87 Work turbo with HSP S400 Kit
Why non vgt if I may ask in the process of ordering one mine just went out
That turbo spool tho 🥵
What traction bars are those?
McGaughy’s
I like the like and subscribe sound it’s mint!!
Your thumbnail had me laughing so I had to click lol
Who does your tuning?
This truck was motor ops
I’ve done this twice and listening to this video I already knew all the problems you where going to complain about lol
The porn hub sound 😂😂😂
😂
Waiting for the ford build after this
You know how you build a ford?
Start with a Chevy 😎
How much was that
?
What type of intake are you running
SDP
Ok thanks for the reply are you running the full intake or factory turbo mouth mouth pice
Sounds amazing
I just wanna know how he makes so much money to do all this truck stuff constantly
I don’t make “so much” I make enough to save up and buy parts.
@JW Montoya I want to install this turbo, what is all you needed and how much did it cost for everything, also is there anyway I could get the tune you had and put it on my efi live scanner? I'm really interested in doing this any help would be appreciated thank you
Love the RDS, # L5P 🤘
It sounds good!!!
"Put it in the ford"???🤣🤣🤣
When we MOD our trucks for the sound and not performance. What has this world come to.
Holy whistle xD that's bad ass.
Fudge can't to do this in ca regulations
Love love love
Put it in the Ford he said 🤣🤣🤣🤣🤣
I have a problem recording with my phone due to dies fast, overheat, and small storage. Does anyone know of a good video camera? To record
GoPro hero 8 is good for vlogs
@@JWMontoya any program suggestion for editing gopro videos?
A 66mm turbo is not big for a duramax
🎵🎵🎵🎵
Loud obnoxious exhaust shows your age. Sorry.
You drive that thing like a little girl
Thanks
Did mom and Dada buy your truck
Is what how you cope with your jealousy?